From: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@slimlogic.co.uk>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com
Subject: [PATCH 2/2] ASoC: WM8994: Improve playback robustness
Date: Thu, 10 Feb 2011 13:27:58 +0000 [thread overview]
Message-ID: <1297344478-30490-2-git-send-email-dp@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1297344478-30490-1-git-send-email-dp@opensource.wolfsonmicro.com>
On WM8994 revision D and earlier ensure proper playback robustness
as some rare use cases can trigger issues.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm8994.c | 60 +++++++++++++++++++++++++++++++++++++++-----
1 files changed, 53 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 055ad8f..e1ad5f9 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -1083,6 +1083,17 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w,
return 0;
}
+static int dac_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ unsigned int mask = 1 << w->shift;
+
+ snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
+ mask, mask);
+ return 0;
+}
+
static const char *hp_mux_text[] = {
"Mixer",
"DAC",
@@ -1374,6 +1385,24 @@ SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, NULL, 0)
};
+static const struct snd_soc_dapm_widget wm8994_dac_revd_widgets[] = {
+SND_SOC_DAPM_DAC_E("DAC2L", NULL, SND_SOC_NOPM, 3, 0,
+ dac_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_DAC_E("DAC2R", NULL, SND_SOC_NOPM, 2, 0,
+ dac_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_DAC_E("DAC1L", NULL, SND_SOC_NOPM, 1, 0,
+ dac_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_DAC_E("DAC1R", NULL, SND_SOC_NOPM, 0, 0,
+ dac_ev, SND_SOC_DAPM_PRE_PMU),
+};
+
+static const struct snd_soc_dapm_widget wm8994_dac_widgets[] = {
+SND_SOC_DAPM_DAC("DAC2L", NULL, WM8994_POWER_MANAGEMENT_5, 3, 0),
+SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 2, 0),
+SND_SOC_DAPM_DAC("DAC1L", NULL, WM8994_POWER_MANAGEMENT_5, 1, 0),
+SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0),
+};
+
static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("DMIC1DAT"),
SND_SOC_DAPM_INPUT("DMIC2DAT"),
@@ -1471,11 +1500,6 @@ SND_SOC_DAPM_ADC("ADCR", NULL, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux),
SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux),
-SND_SOC_DAPM_DAC("DAC2L", NULL, WM8994_POWER_MANAGEMENT_5, 3, 0),
-SND_SOC_DAPM_DAC("DAC2R", NULL, WM8994_POWER_MANAGEMENT_5, 2, 0),
-SND_SOC_DAPM_DAC("DAC1L", NULL, WM8994_POWER_MANAGEMENT_5, 1, 0),
-SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0),
-
SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
@@ -2627,6 +2651,23 @@ static int wm8994_resume(struct snd_soc_codec *codec)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
int i, ret;
+ unsigned int val, mask;
+
+ if (wm8994->revision < 4) {
+ /* force a HW read */
+ codec->cache_bypass = 1;
+ val = snd_soc_read(codec, WM8994_POWER_MANAGEMENT_5);
+ codec->cache_bypass = 0;
+
+ /* modify the cache only */
+ codec->cache_only = 1;
+ mask = WM8994_DAC1R_ENA | WM8994_DAC1L_ENA |
+ WM8994_DAC2R_ENA | WM8994_DAC2L_ENA;
+ val &= mask;
+ snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
+ mask, val);
+ codec->cache_only = 0;
+ }
/* Restore the registers */
ret = snd_soc_cache_sync(codec);
@@ -3238,12 +3279,17 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
case WM8994:
snd_soc_dapm_new_controls(dapm, wm8994_specific_dapm_widgets,
ARRAY_SIZE(wm8994_specific_dapm_widgets));
- if (wm8994->revision < 4)
+ if (wm8994->revision < 4) {
snd_soc_dapm_new_controls(dapm, wm8994_lateclk_revd_widgets,
ARRAY_SIZE(wm8994_lateclk_revd_widgets));
- else
+ snd_soc_dapm_new_controls(dapm, wm8994_dac_revd_widgets,
+ ARRAY_SIZE(wm8994_dac_revd_widgets));
+ } else {
snd_soc_dapm_new_controls(dapm, wm8994_lateclk_widgets,
ARRAY_SIZE(wm8994_lateclk_widgets));
+ snd_soc_dapm_new_controls(dapm, wm8994_dac_widgets,
+ ARRAY_SIZE(wm8994_dac_widgets));
+ }
break;
case WM8958:
snd_soc_add_controls(codec, wm8958_snd_controls,
--
1.7.3.5
next prev parent reply other threads:[~2011-02-10 13:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-10 13:27 [PATCH 1/2] ASoC: WM8994: Improve robustness in some use cases Dimitris Papastamos
2011-02-10 13:27 ` Dimitris Papastamos [this message]
2011-02-10 23:59 ` Liam Girdwood
2011-02-11 11:15 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297344478-30490-2-git-send-email-dp@opensource.wolfsonmicro.com \
--to=dp@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@slimlogic.co.uk \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox