From: Lu Guanqun <guanqun.lu@intel.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, Lu Guanqun <guanqun.lu@intel.com>,
broonie@opensource.wolfsonmicro.com, lrg@slimlogic.co.uk
Subject: [PATCH 1/2] ASoC: remove dapm_update_bits()
Date: Sat, 2 Apr 2011 15:23:35 +0800 [thread overview]
Message-ID: <1301729016-355-1-git-send-email-guanqun.lu@intel.com> (raw)
dapm_update_bits() is only called in dapm_generic_apply_power(). And in turn,
dapm_generic_apply_power() is only called in dapm_seq_run() when w->id is
snd_soc_dapm_{input|output|hp|line|mic}. Under these cases, dapm_update_bits()
is rather useless, because the below tests are always true:
/* check for valid widgets */
if (widget->reg < 0 || widget->id == snd_soc_dapm_input ||
widget->id == snd_soc_dapm_output ||
widget->id == snd_soc_dapm_hp ||
widget->id == snd_soc_dapm_mic ||
widget->id == snd_soc_dapm_line ||
widget->id == snd_soc_dapm_spk)
return 0;
Therefore, we better omit this function for simplicity.
Signed-off-by: Lu Guanqun <guanqun.lu@intel.com>
---
sound/soc/soc-dapm.c | 41 -----------------------------------------
1 files changed, 0 insertions(+), 41 deletions(-)
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 81c4052..d511bbe 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -322,45 +322,6 @@ static int dapm_connect_mixer(struct snd_soc_dapm_context *dapm,
return -ENODEV;
}
-/* update dapm codec register bits */
-static int dapm_update_bits(struct snd_soc_dapm_widget *widget)
-{
- int change, power;
- unsigned int old, new;
- struct snd_soc_codec *codec = widget->codec;
- struct snd_soc_dapm_context *dapm = widget->dapm;
- struct snd_soc_card *card = dapm->card;
-
- /* check for valid widgets */
- if (widget->reg < 0 || widget->id == snd_soc_dapm_input ||
- widget->id == snd_soc_dapm_output ||
- widget->id == snd_soc_dapm_hp ||
- widget->id == snd_soc_dapm_mic ||
- widget->id == snd_soc_dapm_line ||
- widget->id == snd_soc_dapm_spk)
- return 0;
-
- power = widget->power;
- if (widget->invert)
- power = (power ? 0:1);
-
- old = snd_soc_read(codec, widget->reg);
- new = (old & ~(0x1 << widget->shift)) | (power << widget->shift);
-
- change = old != new;
- if (change) {
- pop_dbg(dapm->dev, card->pop_time,
- "pop test %s : %s in %d ms\n",
- widget->name, widget->power ? "on" : "off",
- card->pop_time);
- pop_wait(card->pop_time);
- snd_soc_write(codec, widget->reg, new);
- }
- dev_dbg(dapm->dev, "reg %x old %x new %x change %d\n", widget->reg,
- old, new, change);
- return change;
-}
-
/* create new dapm mixer control */
static int dapm_new_mixer(struct snd_soc_dapm_context *dapm,
struct snd_soc_dapm_widget *w)
@@ -673,8 +634,6 @@ static int dapm_generic_apply_power(struct snd_soc_dapm_widget *w)
return ret;
}
- dapm_update_bits(w);
-
/* power up post event */
if (w->power && w->event &&
(w->event_flags & SND_SOC_DAPM_POST_PMU)) {
--
1.7.2.3
next reply other threads:[~2011-04-02 7:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-02 7:23 Lu Guanqun [this message]
2011-04-02 7:23 ` [PATCH 2/2] ASoC: rename dapm_generic_apply_power() Lu Guanqun
2011-04-02 7:35 ` Mark Brown
2011-04-02 7:44 ` Lu Guanqun
2011-04-02 7:46 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1301729016-355-1-git-send-email-guanqun.lu@intel.com \
--to=guanqun.lu@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lrg@slimlogic.co.uk \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).