From: Sangbeom Kim <sbkim73@samsung.com>
To: alsa-devel@alsa-project.org, linux-samsung-soc@vger.kernel.org
Cc: jassisinghbrar@gmail.com, lrg@slimlogic.co.uk,
broonie@opensource.wolfsonmicro.com, kgene.kim@samsung.com,
Sangbeom Kim <sbkim73@samsung.com>
Subject: [PATCH 2/2] ASoC: SAMSUNG: Add WM8994 PCM Machine driver
Date: Mon, 25 Apr 2011 15:54:31 +0900 [thread overview]
Message-ID: <1303714472-2391-2-git-send-email-sbkim73@samsung.com> (raw)
In-Reply-To: <1303714472-2391-1-git-send-email-sbkim73@samsung.com>
This patch add WM8994 PCM machine driver to support PCM audio
on SMDKV310, SMDKC210 boards.
Playback and Capture supports 8kHz sampling rates.
and It is tested on SMDKV310, SMDKC210.
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
---
sound/soc/samsung/Kconfig | 8 ++
sound/soc/samsung/Makefile | 2 +
sound/soc/samsung/smdk_wm8994pcm.c | 175 ++++++++++++++++++++++++++++++++++++
3 files changed, 185 insertions(+), 0 deletions(-)
create mode 100644 sound/soc/samsung/smdk_wm8994pcm.c
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index b8c7a2e..db2bc49 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -170,3 +170,11 @@ config SND_SOC_SMDK_WM8580_PCM
select SND_SAMSUNG_PCM
help
Say Y if you want to add support for SoC audio on the SMDK.
+
+config SND_SOC_SMDK_WM8994_PCM
+ tristate "SoC PCM Audio support for WM8994 on SMDK"
+ depends on SND_SOC_SAMSUNG && (MACH_SMDKC210 || MACH_SMDKV310)
+ select SND_SOC_WM8994
+ select SND_SAMSUNG_PCM
+ help
+ Say Y if you want to add support for SoC audio on the SMDK.
diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile
index 6c598fc..4a3a428 100644
--- a/sound/soc/samsung/Makefile
+++ b/sound/soc/samsung/Makefile
@@ -35,6 +35,7 @@ snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
snd-soc-goni-wm8994-objs := goni_wm8994.o
snd-soc-smdk-spdif-objs := smdk_spdif.o
snd-soc-smdk-wm8580pcm-objs := smdk_wm8580pcm.o
+snd-soc-smdk-wm8994pcm-objs := smdk_wm8994pcm.o
obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
@@ -53,3 +54,4 @@ obj-$(CONFIG_SND_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o
obj-$(CONFIG_SND_SOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o
obj-$(CONFIG_SND_SOC_SMDK_WM8580_PCM) += snd-soc-smdk-wm8580pcm.o
+obj-$(CONFIG_SND_SOC_SMDK_WM8994_PCM) += snd-soc-smdk-wm8994pcm.o
diff --git a/sound/soc/samsung/smdk_wm8994pcm.c b/sound/soc/samsung/smdk_wm8994pcm.c
new file mode 100644
index 0000000..756c228
--- /dev/null
+++ b/sound/soc/samsung/smdk_wm8994pcm.c
@@ -0,0 +1,175 @@
+/*
+ * sound/soc/samsung/smdk_wm8994pcm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co. Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <sound/soc.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "../codecs/wm8994.h"
+#include "dma.h"
+#include "pcm.h"
+
+/*
+ * Board Settings:
+ * o '1' means 'ON'
+ * o '0' means 'OFF'
+ * o 'X' means 'Don't care'
+ *
+ * SMDKC210, SMDKV310: CFG3- 1001, CFG5-1000, CFG7-111111
+ */
+
+/*
+ * Configure audio route as :-
+ * $ amixer sset 'DAC1' on,on
+ * $ amixer sset 'Right Headphone Mux' 'DAC'
+ * $ amixer sset 'Left Headphone Mux' 'DAC'
+ * $ amixer sset 'DAC1R Mixer AIF1.1' on
+ * $ amixer sset 'DAC1L Mixer AIF1.1' on
+ * $ amixer sset 'IN2L' on
+ * $ amixer sset 'IN2L PGA IN2LN' on
+ * $ amixer sset 'MIXINL IN2L' on
+ * $ amixer sset 'AIF1ADC1L Mixer ADC/DMIC' on
+ * $ amixer sset 'IN2R' on
+ * $ amixer sset 'IN2R PGA IN2RN' on
+ * $ amixer sset 'MIXINR IN2R' on
+ * $ amixer sset 'AIF1ADC1R Mixer ADC/DMIC' on
+ */
+
+/* SMDK has a 16.9344MHZ crystal attached to WM8994 */
+#define SMDK_WM8994_FREQ 16934400
+
+static int smdk_wm8994_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ unsigned long mclk_freq;
+ int rfs, ret;
+
+ switch(params_rate(params)) {
+ case 8000:
+ rfs = 512;
+ break;
+ default:
+ printk(KERN_ERR "%s:%d Sampling Rate %u not supported!\n",
+ __func__, __LINE__, params_rate(params));
+ return -EINVAL;
+ }
+
+ mclk_freq = params_rate(params) * rfs;
+
+ /* Set the codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B
+ | SND_SOC_DAIFMT_IB_NF
+ | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /* Set the cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B
+ | SND_SOC_DAIFMT_IB_NF
+ | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,
+ mclk_freq, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, WM8994_FLL_SRC_MCLK1,
+ SMDK_WM8994_FREQ, mclk_freq);
+ if (ret < 0)
+ return ret;
+
+ /* Set PCM source clock on CPU */
+ ret = snd_soc_dai_set_sysclk(cpu_dai, S3C_PCM_CLKSRC_MUX,
+ mclk_freq, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ /* Set SCLK_DIV for making bclk */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_PCM_SCLK_PER_FS, rfs);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops smdk_wm8994_pcm_ops = {
+ .hw_params = smdk_wm8994_pcm_hw_params,
+};
+
+static struct snd_soc_dai_link smdk_dai[] = {
+ {
+ .name = "WM8994 PAIF PCM",
+ .stream_name = "Primary PCM",
+ .cpu_dai_name = "samsung-pcm.0",
+ .codec_dai_name = "wm8994-aif1",
+ .platform_name = "samsung-audio",
+ .codec_name = "wm8994-codec",
+ .ops = &smdk_wm8994_pcm_ops,
+ },
+};
+
+static struct snd_soc_card smdk_pcm = {
+ .name = "SMDK-PCM",
+ .dai_link = smdk_dai,
+ .num_links = 1,
+};
+
+static int __devinit snd_smdk_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ smdk_pcm.dev = &pdev->dev;
+ ret = snd_soc_register_card(&smdk_pcm);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card failed %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devexit snd_smdk_remove(struct platform_device *pdev)
+{
+ snd_soc_unregister_card(&smdk_pcm);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct platform_driver snd_smdk_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "samsung-smdk-pcm",
+ },
+ .probe = snd_smdk_probe,
+ .remove = __devexit_p(snd_smdk_remove),
+};
+
+static int __init smdk_audio_init(void)
+{
+ return platform_driver_register(&snd_smdk_driver);
+}
+
+module_init(smdk_audio_init);
+
+static void __exit smdk_audio_exit(void)
+{
+ platform_driver_unregister(&snd_smdk_driver);
+}
+
+module_exit(smdk_audio_exit);
+
+MODULE_AUTHOR("Sangbeom Kim, <sbkim73@samsung.com>");
+MODULE_DESCRIPTION("ALSA SoC SMDK WM8994 for PCM");
+MODULE_LICENSE("GPL");
--
1.7.1
next prev parent reply other threads:[~2011-04-25 6:54 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-25 6:54 (unknown), Sangbeom Kim
2011-04-25 6:54 ` Sangbeom Kim [this message]
2011-04-25 6:54 ` [PATCH 1/2] ARM: EXYNOS4: Add PCM audio support for WM8994 Sangbeom Kim
2011-04-25 16:10 ` Jassi Brar
2011-04-26 2:06 ` [alsa-devel] " Sangbeom Kim
2011-04-26 5:07 ` Jassi Brar
2011-04-26 8:26 ` [alsa-devel] (no subject) Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1303714472-2391-2-git-send-email-sbkim73@samsung.com \
--to=sbkim73@samsung.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=jassisinghbrar@gmail.com \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox