* [PATCH v2 0/4] ASoC: twl6040: Gain ramp code cleanups
@ 2011-09-28 11:16 Peter Ujfalusi
2011-09-28 11:16 ` [PATCH v2 1/4] ASoC: twl6040: One workqueue should be enough Peter Ujfalusi
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Peter Ujfalusi @ 2011-09-28 11:16 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, Misael Lopez Cruz
Hello,
Changes since v1:
- Loop counters cleaned, commented in patch 2
- Use cancel_delayed_work_sync to make sure that we do not have pending work,
or executing work when modifying the variables used by the ramp code.
- patches already taken left out.
Intro from v1:
the following series cleans up the gain ramp code found in the twl6040 codec
driver.
Main changes:
- use one workqueue for the twl6040 codec driver (instead of the original 3)
- Delays between the steps does not need to be different among the range.
I assume, that the original code contained copy-paste snippets from wm8350
for this part
- Cleanups for the DAPM_OUT_DRV_E event handler code.
- delayed_works moved within their corresponding struct.
The series has been generated on top of:
git://opensource.wolfsonmicro.com/linux-2.6-asoc,
for-3.2 branch + ASoC: omap-mcpdm/twl6040: Offset cancellation series.
Side note: I have done this to better understand (while cleaning up the
twl6040 driver) the requirements for the ramp code, and to study the
possibility of adding support in the core for this (to handle the wm8350, and
twl6040 in a generic way later).
I'm still looking at the optimal implementation without ending up with too
complicated code/structures...
Regards,
Peter
---
Peter Ujfalusi (4):
ASoC: twl6040: One workqueue should be enough
ASoC: twl6040: correct loop counters for HS/HF ramp code
ASoC: twl6040: Shift 2 identifies the HS output in out_drv_event
ASoC: twl6040: Simplify code in out_drv_event for pending work check
sound/soc/codecs/twl6040.c | 68 +++++++++++++------------------------------
1 files changed, 21 insertions(+), 47 deletions(-)
--
1.7.6.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/4] ASoC: twl6040: One workqueue should be enough
2011-09-28 11:16 [PATCH v2 0/4] ASoC: twl6040: Gain ramp code cleanups Peter Ujfalusi
@ 2011-09-28 11:16 ` Peter Ujfalusi
2011-09-28 11:16 ` [PATCH v2 2/4] ASoC: twl6040: correct loop counters for HS/HF ramp code Peter Ujfalusi
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Peter Ujfalusi @ 2011-09-28 11:16 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, Misael Lopez Cruz
It is a bit overkill to have three (3) separate
workqueue for a single driver.
We can manage things with one workqueue nicely.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
sound/soc/codecs/twl6040.c | 33 +++++----------------------------
1 files changed, 5 insertions(+), 28 deletions(-)
diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 5bf305b..91242de 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -103,8 +103,6 @@ struct twl6040_data {
struct mutex mutex;
struct twl6040_output headset;
struct twl6040_output handsfree;
- struct workqueue_struct *hf_workqueue;
- struct workqueue_struct *hs_workqueue;
};
/*
@@ -562,20 +560,17 @@ static int out_drv_event(struct snd_soc_dapm_widget *w,
struct twl6040_data *priv = snd_soc_codec_get_drvdata(codec);
struct twl6040_output *out;
struct delayed_work *work;
- struct workqueue_struct *queue;
switch (w->shift) {
case 2:
case 3:
out = &priv->headset;
- queue = priv->hs_workqueue;
out->left_step = priv->hs_left_step;
out->right_step = priv->hs_right_step;
out->step_delay = 5; /* 5 ms between volume ramp steps */
break;
case 4:
out = &priv->handsfree;
- queue = priv->hf_workqueue;
out->left_step = priv->hf_left_step;
out->right_step = priv->hf_right_step;
out->step_delay = 5; /* 5 ms between volume ramp steps */
@@ -601,7 +596,7 @@ static int out_drv_event(struct snd_soc_dapm_widget *w,
if (!delayed_work_pending(work)) {
out->ramp = TWL6040_RAMP_UP;
- queue_delayed_work(queue, work,
+ queue_delayed_work(priv->workqueue, work,
msecs_to_jiffies(1));
}
break;
@@ -615,7 +610,7 @@ static int out_drv_event(struct snd_soc_dapm_widget *w,
out->ramp = TWL6040_RAMP_DOWN;
INIT_COMPLETION(out->ramp_done);
- queue_delayed_work(queue, work,
+ queue_delayed_work(priv->workqueue, work,
msecs_to_jiffies(1));
wait_for_completion_timeout(&out->ramp_done,
@@ -1584,33 +1579,21 @@ static int twl6040_probe(struct snd_soc_codec *codec)
goto work_err;
}
- priv->workqueue = create_singlethread_workqueue("twl6040-codec");
+ priv->workqueue = alloc_workqueue("twl6040-codec", 0, 0);
if (!priv->workqueue) {
ret = -ENOMEM;
goto work_err;
}
INIT_DELAYED_WORK(&priv->hs_jack.work, twl6040_accessory_work);
+ INIT_DELAYED_WORK(&priv->headset.work, twl6040_pga_hs_work);
+ INIT_DELAYED_WORK(&priv->handsfree.work, twl6040_pga_hf_work);
mutex_init(&priv->mutex);
init_completion(&priv->headset.ramp_done);
init_completion(&priv->handsfree.ramp_done);
- priv->hf_workqueue = create_singlethread_workqueue("twl6040-hf");
- if (priv->hf_workqueue == NULL) {
- ret = -ENOMEM;
- goto hfwq_err;
- }
- priv->hs_workqueue = create_singlethread_workqueue("twl6040-hs");
- if (priv->hs_workqueue == NULL) {
- ret = -ENOMEM;
- goto hswq_err;
- }
-
- INIT_DELAYED_WORK(&priv->headset.work, twl6040_pga_hs_work);
- INIT_DELAYED_WORK(&priv->handsfree.work, twl6040_pga_hf_work);
-
ret = request_threaded_irq(priv->plug_irq, NULL, twl6040_audio_handler,
0, "twl6040_irq_plug", codec);
if (ret) {
@@ -1634,10 +1617,6 @@ static int twl6040_probe(struct snd_soc_codec *codec)
bias_err:
free_irq(priv->plug_irq, codec);
plugirq_err:
- destroy_workqueue(priv->hs_workqueue);
-hswq_err:
- destroy_workqueue(priv->hf_workqueue);
-hfwq_err:
destroy_workqueue(priv->workqueue);
work_err:
kfree(priv);
@@ -1651,8 +1630,6 @@ static int twl6040_remove(struct snd_soc_codec *codec)
twl6040_set_bias_level(codec, SND_SOC_BIAS_OFF);
free_irq(priv->plug_irq, codec);
destroy_workqueue(priv->workqueue);
- destroy_workqueue(priv->hf_workqueue);
- destroy_workqueue(priv->hs_workqueue);
kfree(priv);
return 0;
--
1.7.6.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/4] ASoC: twl6040: correct loop counters for HS/HF ramp code
2011-09-28 11:16 [PATCH v2 0/4] ASoC: twl6040: Gain ramp code cleanups Peter Ujfalusi
2011-09-28 11:16 ` [PATCH v2 1/4] ASoC: twl6040: One workqueue should be enough Peter Ujfalusi
@ 2011-09-28 11:16 ` Peter Ujfalusi
2011-09-28 11:16 ` [PATCH v2 3/4] ASoC: twl6040: Shift 2 identifies the HS output in out_drv_event Peter Ujfalusi
2011-09-28 11:16 ` [PATCH v2 4/4] ASoC: twl6040: Simplify code in out_drv_event for pending work check Peter Ujfalusi
3 siblings, 0 replies; 6+ messages in thread
From: Peter Ujfalusi @ 2011-09-28 11:16 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, Misael Lopez Cruz
The Headset gain range is 0 - 0xf (4 bit resolution)
The Handsfree gain range is 0 - 0x1d (5 bit resolution,
0x1e, and 0x1f values are invalid)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
sound/soc/codecs/twl6040.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 91242de..4aa7d69 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -495,8 +495,8 @@ static void twl6040_pga_hs_work(struct work_struct *work)
if (headset->ramp == TWL6040_RAMP_NONE)
return;
- /* HS PGA volumes have 4 bits of resolution to ramp */
- for (i = 0; i <= 16; i++) {
+ /* HS PGA gain range: 0x0 - 0xf (0 - 15) */
+ for (i = 0; i < 16; i++) {
headset_complete = twl6040_hs_ramp_step(codec,
headset->left_step,
headset->right_step);
@@ -530,8 +530,9 @@ static void twl6040_pga_hf_work(struct work_struct *work)
if (handsfree->ramp == TWL6040_RAMP_NONE)
return;
- /* HF PGA volumes have 5 bits of resolution to ramp */
- for (i = 0; i <= 32; i++) {
+ /*
+ * HF PGA gain range: 0x00 - 0x1d (0 - 29) */
+ for (i = 0; i < 30; i++) {
handsfree_complete = twl6040_hf_ramp_step(codec,
handsfree->left_step,
handsfree->right_step);
--
1.7.6.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 3/4] ASoC: twl6040: Shift 2 identifies the HS output in out_drv_event
2011-09-28 11:16 [PATCH v2 0/4] ASoC: twl6040: Gain ramp code cleanups Peter Ujfalusi
2011-09-28 11:16 ` [PATCH v2 1/4] ASoC: twl6040: One workqueue should be enough Peter Ujfalusi
2011-09-28 11:16 ` [PATCH v2 2/4] ASoC: twl6040: correct loop counters for HS/HF ramp code Peter Ujfalusi
@ 2011-09-28 11:16 ` Peter Ujfalusi
2011-09-28 11:16 ` [PATCH v2 4/4] ASoC: twl6040: Simplify code in out_drv_event for pending work check Peter Ujfalusi
3 siblings, 0 replies; 6+ messages in thread
From: Peter Ujfalusi @ 2011-09-28 11:16 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, Misael Lopez Cruz
None of the driver handled by out_drv_event have it's power
bit shifted by 3.
Remove the case for shift 3, and also add comment for the cases.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
sound/soc/codecs/twl6040.c | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index 4aa7d69..c2b5829 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -563,14 +563,13 @@ static int out_drv_event(struct snd_soc_dapm_widget *w,
struct delayed_work *work;
switch (w->shift) {
- case 2:
- case 3:
+ case 2: /* Headset output driver */
out = &priv->headset;
out->left_step = priv->hs_left_step;
out->right_step = priv->hs_right_step;
out->step_delay = 5; /* 5 ms between volume ramp steps */
break;
- case 4:
+ case 4: /* Handsfree output driver */
out = &priv->handsfree;
out->left_step = priv->hf_left_step;
out->right_step = priv->hf_right_step;
--
1.7.6.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 4/4] ASoC: twl6040: Simplify code in out_drv_event for pending work check
2011-09-28 11:16 [PATCH v2 0/4] ASoC: twl6040: Gain ramp code cleanups Peter Ujfalusi
` (2 preceding siblings ...)
2011-09-28 11:16 ` [PATCH v2 3/4] ASoC: twl6040: Shift 2 identifies the HS output in out_drv_event Peter Ujfalusi
@ 2011-09-28 11:16 ` Peter Ujfalusi
2011-09-29 12:11 ` Péter Ujfalusi
3 siblings, 1 reply; 6+ messages in thread
From: Peter Ujfalusi @ 2011-09-28 11:16 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, Misael Lopez Cruz
Check for pending work before the DAPM event switch case, and return,
if the work is pending.
This way we can remove the two additional checks in POST_PMU, and
PRE_PMD for non pending works.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
sound/soc/codecs/twl6040.c | 25 +++++++++++--------------
1 files changed, 11 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index c2b5829..e2e6c66 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -585,37 +585,34 @@ static int out_drv_event(struct snd_soc_dapm_widget *w,
work = &out->work;
+ if (delayed_work_pending(work))
+ return 0;
+
switch (event) {
case SND_SOC_DAPM_POST_PMU:
if (out->active)
break;
/* don't use volume ramp for power-up */
+ out->ramp = TWL6040_RAMP_UP;
out->left_step = out->left_vol;
out->right_step = out->right_vol;
- if (!delayed_work_pending(work)) {
- out->ramp = TWL6040_RAMP_UP;
- queue_delayed_work(priv->workqueue, work,
- msecs_to_jiffies(1));
- }
+ queue_delayed_work(priv->workqueue, work, msecs_to_jiffies(1));
break;
case SND_SOC_DAPM_PRE_PMD:
if (!out->active)
break;
- if (!delayed_work_pending(work)) {
- /* use volume ramp for power-down */
- out->ramp = TWL6040_RAMP_DOWN;
- INIT_COMPLETION(out->ramp_done);
+ /* use volume ramp for power-down */
+ out->ramp = TWL6040_RAMP_DOWN;
+ INIT_COMPLETION(out->ramp_done);
- queue_delayed_work(priv->workqueue, work,
- msecs_to_jiffies(1));
+ queue_delayed_work(priv->workqueue, work, msecs_to_jiffies(1));
- wait_for_completion_timeout(&out->ramp_done,
- msecs_to_jiffies(2000));
- }
+ wait_for_completion_timeout(&out->ramp_done,
+ msecs_to_jiffies(2000));
break;
}
--
1.7.6.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 4/4] ASoC: twl6040: Simplify code in out_drv_event for pending work check
2011-09-28 11:16 ` [PATCH v2 4/4] ASoC: twl6040: Simplify code in out_drv_event for pending work check Peter Ujfalusi
@ 2011-09-29 12:11 ` Péter Ujfalusi
0 siblings, 0 replies; 6+ messages in thread
From: Péter Ujfalusi @ 2011-09-29 12:11 UTC (permalink / raw)
To: Mark Brown; +Cc: alsa-devel, Liam Girdwood, Misael Lopez Cruz
Hi Mark,
On Wednesday 28 September 2011 14:16:33 Peter Ujfalusi wrote:
> Check for pending work before the DAPM event switch case, and return,
> if the work is pending.
> This way we can remove the two additional checks in POST_PMU, and
> PRE_PMD for non pending works.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Please ignore this patch.
For some reason this is the patch from the v1 series.
Sorry,
Péter
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-09-29 12:11 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-09-28 11:16 [PATCH v2 0/4] ASoC: twl6040: Gain ramp code cleanups Peter Ujfalusi
2011-09-28 11:16 ` [PATCH v2 1/4] ASoC: twl6040: One workqueue should be enough Peter Ujfalusi
2011-09-28 11:16 ` [PATCH v2 2/4] ASoC: twl6040: correct loop counters for HS/HF ramp code Peter Ujfalusi
2011-09-28 11:16 ` [PATCH v2 3/4] ASoC: twl6040: Shift 2 identifies the HS output in out_drv_event Peter Ujfalusi
2011-09-28 11:16 ` [PATCH v2 4/4] ASoC: twl6040: Simplify code in out_drv_event for pending work check Peter Ujfalusi
2011-09-29 12:11 ` Péter Ujfalusi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).