From mboxrd@z Thu Jan 1 00:00:00 1970 From: Axel Lin Subject: [PATCH 2/2] ASoC: sgtl5000: Fix setting mic bias resistor Date: Wed, 19 Oct 2011 11:00:42 +0800 Message-ID: <1318993242.7128.5.camel@phoenix> References: <1318992896.7128.1.camel@phoenix> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1318992896.7128.1.camel@phoenix> Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: Wolfram Sang , Liam Girdwood , Mark Brown , alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org According to the datasheet: CHIP_MIC_CTRL 0x002A BITS[9:8] BIAS_RESISTOR 0x0 = Powerd off 0x1 = 2.0 kohm 0x2 = 4.0 kohm 0x3 = 8.0 kohm To set mic bias resistor, we need to update bits[9:8] of SGTL5000_CHIP_MIC_CTRL register. Signed-off-by: Axel Lin --- sound/soc/codecs/sgtl5000.c | 9 +++------ 1 files changed, 3 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 91130fb..3637a62 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -131,16 +131,13 @@ static int mic_bias_event(struct snd_soc_dapm_widget *w, case SND_SOC_DAPM_POST_PMU: /* change mic bias resistor to 4Kohm */ snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL, - SGTL5000_BIAS_R_4k, SGTL5000_BIAS_R_4k); + SGTL5000_BIAS_R_MASK, + SGTL5000_BIAS_R_4k << SGTL5000_BIAS_R_SHIFT); break; case SND_SOC_DAPM_PRE_PMD: - /* - * SGTL5000_BIAS_R_8k as mask to clean the two bits - * of mic bias and output impedance - */ snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL, - SGTL5000_BIAS_R_8k, 0); + SGTL5000_BIAS_R_MASK, 0); break; } return 0; -- 1.7.5.4