alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v5 2/2] ASoC: da7210: Add support for ALC and Noise suppression
@ 2011-10-18 13:43 Ashish Chavan
  2011-10-19  7:57 ` [alsa-devel] " Girdwood, Liam
  0 siblings, 1 reply; 3+ messages in thread
From: Ashish Chavan @ 2011-10-18 13:43 UTC (permalink / raw)
  To: Mark Brown, lrg, alsa-devel
  Cc: linux-kernel, kuninori.morimoto.gx, David Dajun Chen

This patch adds controls to set following ALC parameters,
 - Max gain, Min gain, Noise gain, Attack rate, Release rate and delay

It also adds a switch to enable/disable noise suppression.

As per DA7210 data sheet, ALC and noise suppression can be enabled
only if certain conditions are met. This condition checks are handled
by simply using "_EXT" version of controls to capture change events.

Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
---
Changes since v1:
- Reading from register instead of cache
- Made debug message more specific about error
- Changed "Gain" to "Volume" in names of ALC controls
---
 sound/soc/codecs/da7210.c |  109 +++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 109 insertions(+), 0 deletions(-)

diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
index a31be70..edcfc36 100644
--- a/sound/soc/codecs/da7210.c
+++ b/sound/soc/codecs/da7210.c
@@ -26,11 +26,15 @@
 #include <sound/tlv.h>
 
 /* DA7210 register space */
+#define DA7210_CONTROL			0x01
 #define DA7210_STATUS			0x02
 #define DA7210_STARTUP1			0x03
 #define DA7210_MIC_L			0x07
 #define DA7210_MIC_R			0x08
+#define DA7210_AUX1_L			0x09
+#define DA7210_AUX1_R			0x0A
 #define DA7210_AUX2			0x0B
+#define DA7210_IN_GAIN			0x0C
 #define DA7210_INMIX_L			0x0D
 #define DA7210_INMIX_R			0x0E
 #define DA7210_ADC_HPF			0x0F
@@ -59,6 +63,12 @@
 #define DA7210_PLL_DIV2			0x2A
 #define DA7210_PLL_DIV3			0x2B
 #define DA7210_PLL			0x2C
+#define DA7210_ALC_MAX			0x83
+#define DA7210_ALC_MIN			0x84
+#define DA7210_ALC_NOIS			0x85
+#define DA7210_ALC_ATT			0x86
+#define DA7210_ALC_REL			0x87
+#define DA7210_ALC_DEL			0x88
 #define DA7210_A_HID_UNLOCK		0x8A
 #define DA7210_A_TEST_UNLOCK		0x8B
 #define DA7210_A_PLL1			0x90
@@ -81,6 +91,7 @@
 #define DA7210_IN_R_EN			(1 << 7)
 
 /* ADC bit fields */
+#define DA7210_ADC_ALC_EN		(1 << 0)
 #define DA7210_ADC_L_EN			(1 << 3)
 #define DA7210_ADC_R_EN			(1 << 7)
 
@@ -150,6 +161,29 @@
 /* SOFTMUTE bit fields */
 #define DA7210_RAMP_EN			(1 << 6)
 
+/* CONTROL bit fields */
+#define DA7210_NOISE_SUP_EN		(1 << 3)
+
+/* IN_GAIN bit fields */
+#define DA7210_INPGA_L_VOL		(0x0F << 0)
+#define DA7210_INPGA_R_VOL		(0xF0 << 0)
+
+/* ZERO_CROSS bit fields */
+#define DA7210_AUX1_L_ZC		(1 << 0)
+#define DA7210_AUX1_R_ZC		(1 << 1)
+#define DA7210_HP_L_ZC			(1 << 6)
+#define DA7210_HP_R_ZC			(1 << 7)
+
+/* AUX1_L bit fields */
+#define DA7210_AUX1_L_VOL		(0x3F << 0)
+
+/* AUX1_R bit fields */
+#define DA7210_AUX1_R_VOL		(0x3F << 0)
+
+/* Minimum INPGA and AUX1 volume to enable noise suppression */
+#define DA7210_INPGA_MIN_VOL_NS		0x0A  /* 10.5dB */
+#define DA7210_AUX1_MIN_VOL_NS		0x35  /* 6dB */
+
 #define DA7210_VERSION "0.0.1"
 
 /*
@@ -202,6 +236,68 @@ static const char *da7210_hp_mode_txt[] = {
 static const struct soc_enum da7210_hp_mode_sel =
 	SOC_ENUM_SINGLE(DA7210_HP_CFG, 0, 2, da7210_hp_mode_txt);
 
+/* ALC can be enabled only if noise suppression is disabled */
+static int da7210_put_alc_sw(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+
+	if (ucontrol->value.integer.value[0]) {
+		/* Check if noise suppression is enabled */
+		if (snd_soc_read(codec, DA7210_CONTROL) & DA7210_NOISE_SUP_EN) {
+			dev_dbg(codec->dev,
+				"Disable noise suppression to enable ALC\n");
+			return -EPERM;
+		}
+	}
+	/* If all conditions are met or we are actually disabling ALC */
+	return snd_soc_put_volsw(kcontrol, ucontrol);
+}
+
+/* Noise suppression can be enabled only if following conditions are met
+ *  ALC disabled
+ *  ZC enabled for HP and AUX1 PGA
+ *  INPGA_L_VOL and INPGA_R_VOL >= 10.5 dB
+ *  AUX1_L_VOL and AUX1_R_VOL >= 6 dB
+ */
+static int da7210_put_noise_sup_sw(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	u8 val;
+
+	if (ucontrol->value.integer.value[0]) {
+		/* Check if ALC is enabled */
+		if (snd_soc_read(codec, DA7210_ADC) & DA7210_ADC_ALC_EN)
+			goto err;
+
+		/* Check ZC for HP and AUX1 PGA */
+		if ((snd_soc_read(codec, DA7210_ZERO_CROSS) &
+			(DA7210_AUX1_L_ZC | DA7210_AUX1_R_ZC | DA7210_HP_L_ZC |
+			DA7210_HP_R_ZC)) != 0xc3)
+			goto err;
+
+		/* Check INPGA_L_VOL and INPGA_R_VOL */
+		val = snd_soc_read(codec, DA7210_IN_GAIN);
+		if (((val & DA7210_INPGA_L_VOL) < DA7210_INPGA_MIN_VOL_NS) ||
+			(((val & DA7210_INPGA_R_VOL) >> 4) <
+			DA7210_INPGA_MIN_VOL_NS))
+			goto err;
+
+		/* Check AUX1_L_VOL and AUX1_R_VOL */
+		if (((snd_soc_read(codec, DA7210_AUX1_L) & DA7210_AUX1_L_VOL) <
+		    DA7210_AUX1_MIN_VOL_NS) ||
+		    ((snd_soc_read(codec, DA7210_AUX1_R) & DA7210_AUX1_R_VOL) <
+		    DA7210_AUX1_MIN_VOL_NS))
+			goto err;
+	}
+	/* If all conditions are met or we are actually disabling Noise sup */
+	return snd_soc_put_volsw(kcontrol, ucontrol);
+
+err:
+	return -EPERM;
+}
+
 static const struct snd_kcontrol_new da7210_snd_controls[] = {
 
 	SOC_DOUBLE_R_TLV("HeadPhone Playback Volume",
@@ -260,6 +356,19 @@ static const struct snd_kcontrol_new da7210_snd_controls[] = {
 	SOC_DOUBLE("Headphone ZC Switch", DA7210_ZERO_CROSS, 6, 7, 1, 0),
 
 	SOC_ENUM("Headphone Class", da7210_hp_mode_sel),
+
+	/* ALC controls */
+	SOC_SINGLE_EXT("ALC Enable Switch", DA7210_ADC, 0, 1, 0,
+		       snd_soc_get_volsw, da7210_put_alc_sw),
+	SOC_SINGLE("ALC Capture Max Volume", DA7210_ALC_MAX, 0, 0x3F, 0),
+	SOC_SINGLE("ALC Capture Min Volume", DA7210_ALC_MIN, 0, 0x3F, 0),
+	SOC_SINGLE("ALC Capture Noise Volume", DA7210_ALC_NOIS, 0, 0x3F, 0),
+	SOC_SINGLE("ALC Capture Attack Rate", DA7210_ALC_ATT, 0, 0xFF, 0),
+	SOC_SINGLE("ALC Capture Release Rate", DA7210_ALC_REL, 0, 0xFF, 0),
+	SOC_SINGLE("ALC Capture Release Delay", DA7210_ALC_DEL, 0, 0xFF, 0),
+
+	SOC_SINGLE_EXT("Noise Suppression Enable Switch", DA7210_CONTROL, 3, 1,
+		       0, snd_soc_get_volsw, da7210_put_noise_sup_sw),
 };
 
 /* Codec private data */
-- 
1.7.1

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [alsa-devel] [PATCH v5 2/2] ASoC: da7210: Add support for ALC and Noise suppression
  2011-10-18 13:43 [PATCH v5 2/2] ASoC: da7210: Add support for ALC and Noise suppression Ashish Chavan
@ 2011-10-19  7:57 ` Girdwood, Liam
  2011-10-19  8:43   ` Ashish Chavan
  0 siblings, 1 reply; 3+ messages in thread
From: Girdwood, Liam @ 2011-10-19  7:57 UTC (permalink / raw)
  To: Ashish Chavan
  Cc: Mark Brown, alsa-devel, David Dajun Chen, kuninori.morimoto.gx,
	linux-kernel

On 18 October 2011 14:43, Ashish Chavan <ashish.chavan@kpitcummins.com> wrote:
> This patch adds controls to set following ALC parameters,
>  - Max gain, Min gain, Noise gain, Attack rate, Release rate and delay
>
> It also adds a switch to enable/disable noise suppression.
>
> As per DA7210 data sheet, ALC and noise suppression can be enabled
> only if certain conditions are met. This condition checks are handled
> by simply using "_EXT" version of controls to capture change events.
>
> Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com>
> Signed-off-by: David Dajun Chen <dchen@diasemi.com>
> ---
> Changes since v1:
> - Reading from register instead of cache
> - Made debug message more specific about error
> - Changed "Gain" to "Volume" in names of ALC controls
> ---
>  sound/soc/codecs/da7210.c |  109 +++++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 109 insertions(+), 0 deletions(-)
>
> diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
> index a31be70..edcfc36 100644
> --- a/sound/soc/codecs/da7210.c
> +++ b/sound/soc/codecs/da7210.c
> @@ -26,11 +26,15 @@
>  #include <sound/tlv.h>
>
>  /* DA7210 register space */
> +#define DA7210_CONTROL                 0x01
>  #define DA7210_STATUS                  0x02
>  #define DA7210_STARTUP1                        0x03
>  #define DA7210_MIC_L                   0x07
>  #define DA7210_MIC_R                   0x08
> +#define DA7210_AUX1_L                  0x09
> +#define DA7210_AUX1_R                  0x0A
>  #define DA7210_AUX2                    0x0B
> +#define DA7210_IN_GAIN                 0x0C
>  #define DA7210_INMIX_L                 0x0D
>  #define DA7210_INMIX_R                 0x0E
>  #define DA7210_ADC_HPF                 0x0F
> @@ -59,6 +63,12 @@
>  #define DA7210_PLL_DIV2                        0x2A
>  #define DA7210_PLL_DIV3                        0x2B
>  #define DA7210_PLL                     0x2C
> +#define DA7210_ALC_MAX                 0x83
> +#define DA7210_ALC_MIN                 0x84
> +#define DA7210_ALC_NOIS                        0x85
> +#define DA7210_ALC_ATT                 0x86
> +#define DA7210_ALC_REL                 0x87
> +#define DA7210_ALC_DEL                 0x88
>  #define DA7210_A_HID_UNLOCK            0x8A
>  #define DA7210_A_TEST_UNLOCK           0x8B
>  #define DA7210_A_PLL1                  0x90
> @@ -81,6 +91,7 @@
>  #define DA7210_IN_R_EN                 (1 << 7)
>
>  /* ADC bit fields */
> +#define DA7210_ADC_ALC_EN              (1 << 0)
>  #define DA7210_ADC_L_EN                        (1 << 3)
>  #define DA7210_ADC_R_EN                        (1 << 7)
>
> @@ -150,6 +161,29 @@
>  /* SOFTMUTE bit fields */
>  #define DA7210_RAMP_EN                 (1 << 6)
>
> +/* CONTROL bit fields */
> +#define DA7210_NOISE_SUP_EN            (1 << 3)
> +
> +/* IN_GAIN bit fields */
> +#define DA7210_INPGA_L_VOL             (0x0F << 0)
> +#define DA7210_INPGA_R_VOL             (0xF0 << 0)
> +
> +/* ZERO_CROSS bit fields */
> +#define DA7210_AUX1_L_ZC               (1 << 0)
> +#define DA7210_AUX1_R_ZC               (1 << 1)
> +#define DA7210_HP_L_ZC                 (1 << 6)
> +#define DA7210_HP_R_ZC                 (1 << 7)
> +
> +/* AUX1_L bit fields */
> +#define DA7210_AUX1_L_VOL              (0x3F << 0)
> +
> +/* AUX1_R bit fields */
> +#define DA7210_AUX1_R_VOL              (0x3F << 0)
> +
> +/* Minimum INPGA and AUX1 volume to enable noise suppression */
> +#define DA7210_INPGA_MIN_VOL_NS                0x0A  /* 10.5dB */
> +#define DA7210_AUX1_MIN_VOL_NS         0x35  /* 6dB */
> +
>  #define DA7210_VERSION "0.0.1"
>
>  /*
> @@ -202,6 +236,68 @@ static const char *da7210_hp_mode_txt[] = {
>  static const struct soc_enum da7210_hp_mode_sel =
>        SOC_ENUM_SINGLE(DA7210_HP_CFG, 0, 2, da7210_hp_mode_txt);
>
> +/* ALC can be enabled only if noise suppression is disabled */
> +static int da7210_put_alc_sw(struct snd_kcontrol *kcontrol,
> +                            struct snd_ctl_elem_value *ucontrol)
> +{
> +       struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
> +
> +       if (ucontrol->value.integer.value[0]) {
> +               /* Check if noise suppression is enabled */
> +               if (snd_soc_read(codec, DA7210_CONTROL) & DA7210_NOISE_SUP_EN) {
> +                       dev_dbg(codec->dev,
> +                               "Disable noise suppression to enable ALC\n");
> +                       return -EPERM;

-EINVAL


> +               }
> +       }
> +       /* If all conditions are met or we are actually disabling ALC */
> +       return snd_soc_put_volsw(kcontrol, ucontrol);
> +}
> +
> +/* Noise suppression can be enabled only if following conditions are met
> + *  ALC disabled
> + *  ZC enabled for HP and AUX1 PGA
> + *  INPGA_L_VOL and INPGA_R_VOL >= 10.5 dB
> + *  AUX1_L_VOL and AUX1_R_VOL >= 6 dB
> + */
> +static int da7210_put_noise_sup_sw(struct snd_kcontrol *kcontrol,
> +                                  struct snd_ctl_elem_value *ucontrol)
> +{
> +       struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
> +       u8 val;
> +
> +       if (ucontrol->value.integer.value[0]) {
> +               /* Check if ALC is enabled */
> +               if (snd_soc_read(codec, DA7210_ADC) & DA7210_ADC_ALC_EN)
> +                       goto err;
> +
> +               /* Check ZC for HP and AUX1 PGA */
> +               if ((snd_soc_read(codec, DA7210_ZERO_CROSS) &
> +                       (DA7210_AUX1_L_ZC | DA7210_AUX1_R_ZC | DA7210_HP_L_ZC |
> +                       DA7210_HP_R_ZC)) != 0xc3)

It may be clearer if you don't use the magic number here and specify
the bits you are checking.

> +                       goto err;
> +
> +               /* Check INPGA_L_VOL and INPGA_R_VOL */
> +               val = snd_soc_read(codec, DA7210_IN_GAIN);
> +               if (((val & DA7210_INPGA_L_VOL) < DA7210_INPGA_MIN_VOL_NS) ||
> +                       (((val & DA7210_INPGA_R_VOL) >> 4) <
> +                       DA7210_INPGA_MIN_VOL_NS))
> +                       goto err;
> +
> +               /* Check AUX1_L_VOL and AUX1_R_VOL */
> +               if (((snd_soc_read(codec, DA7210_AUX1_L) & DA7210_AUX1_L_VOL) <
> +                   DA7210_AUX1_MIN_VOL_NS) ||
> +                   ((snd_soc_read(codec, DA7210_AUX1_R) & DA7210_AUX1_R_VOL) <
> +                   DA7210_AUX1_MIN_VOL_NS))
> +                       goto err;
> +       }
> +       /* If all conditions are met or we are actually disabling Noise sup */
> +       return snd_soc_put_volsw(kcontrol, ucontrol);
> +
> +err:
> +       return -EPERM;

-EINVAL

> +}
> +
>  static const struct snd_kcontrol_new da7210_snd_controls[] = {
>
>        SOC_DOUBLE_R_TLV("HeadPhone Playback Volume",
> @@ -260,6 +356,19 @@ static const struct snd_kcontrol_new da7210_snd_controls[] = {
>        SOC_DOUBLE("Headphone ZC Switch", DA7210_ZERO_CROSS, 6, 7, 1, 0),
>
>        SOC_ENUM("Headphone Class", da7210_hp_mode_sel),
> +
> +       /* ALC controls */
> +       SOC_SINGLE_EXT("ALC Enable Switch", DA7210_ADC, 0, 1, 0,
> +                      snd_soc_get_volsw, da7210_put_alc_sw),
> +       SOC_SINGLE("ALC Capture Max Volume", DA7210_ALC_MAX, 0, 0x3F, 0),
> +       SOC_SINGLE("ALC Capture Min Volume", DA7210_ALC_MIN, 0, 0x3F, 0),
> +       SOC_SINGLE("ALC Capture Noise Volume", DA7210_ALC_NOIS, 0, 0x3F, 0),
> +       SOC_SINGLE("ALC Capture Attack Rate", DA7210_ALC_ATT, 0, 0xFF, 0),
> +       SOC_SINGLE("ALC Capture Release Rate", DA7210_ALC_REL, 0, 0xFF, 0),
> +       SOC_SINGLE("ALC Capture Release Delay", DA7210_ALC_DEL, 0, 0xFF, 0),
> +
> +       SOC_SINGLE_EXT("Noise Suppression Enable Switch", DA7210_CONTROL, 3, 1,
> +                      0, snd_soc_get_volsw, da7210_put_noise_sup_sw),
>  };
>
>  /* Codec private data */
> --
> 1.7.1
>
>
>

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v5 2/2] ASoC: da7210: Add support for ALC and Noise suppression
  2011-10-19  7:57 ` [alsa-devel] " Girdwood, Liam
@ 2011-10-19  8:43   ` Ashish Chavan
  0 siblings, 0 replies; 3+ messages in thread
From: Ashish Chavan @ 2011-10-19  8:43 UTC (permalink / raw)
  To: Girdwood, Liam
  Cc: alsa-devel, Mark Brown, linux-kernel, kuninori.morimoto.gx,
	David Dajun Chen

> > +       if (ucontrol->value.integer.value[0]) {
> > +               /* Check if noise suppression is enabled */
> > +               if (snd_soc_read(codec, DA7210_CONTROL) & DA7210_NOISE_SUP_EN) {
> > +                       dev_dbg(codec->dev,
> > +                               "Disable noise suppression to enable ALC\n");
> > +                       return -EPERM;
> 
> -EINVAL
> 
> 
> > +               /* Check ZC for HP and AUX1 PGA */
> > +               if ((snd_soc_read(codec, DA7210_ZERO_CROSS) &
> > +                       (DA7210_AUX1_L_ZC | DA7210_AUX1_R_ZC | DA7210_HP_L_ZC |
> > +                       DA7210_HP_R_ZC)) != 0xc3)
> 
> It may be clearer if you don't use the magic number here and specify
> the bits you are checking.
> 
> > +       /* If all conditions are met or we are actually disabling Noise sup */
> > +       return snd_soc_put_volsw(kcontrol, ucontrol);
> > +
> > +err:
> > +       return -EPERM;
> 
> -EINVAL
> 

Thanks. Updating and reposting the patch set.

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2011-10-19  8:33 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-18 13:43 [PATCH v5 2/2] ASoC: da7210: Add support for ALC and Noise suppression Ashish Chavan
2011-10-19  7:57 ` [alsa-devel] " Girdwood, Liam
2011-10-19  8:43   ` Ashish Chavan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).