From: Ashish Chavan <ashish.chavan@kpitcummins.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
lrg <lrg@ti.com>, alsa-devel <alsa-devel@alsa-project.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
"kuninori.morimoto.gx" <kuninori.morimoto.gx@renesas.com>,
David Dajun Chen <david.chen@diasemi.com>
Subject: [PATCH v7 2/3] ASoC: da7210: Add support for line out and DAC
Date: Thu, 20 Oct 2011 20:12:49 +0530 [thread overview]
Message-ID: <1319121769.24621.130.camel@matrix> (raw)
DA7210 has three line outputs. OUT1 Left, OUT1 Right and OUT2 (mono).
This patch adds support for gain controls for these three line outs.
It also adds support for overall DAC gain control.
Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
---
Changes since v1:
- Removed explicit setting of default gains
- Renamed "DAC Playback" to "Digital Playback"
---
sound/soc/codecs/da7210.c | 42 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 42 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
index 2187db9..eaec60a 100644
--- a/sound/soc/codecs/da7210.c
+++ b/sound/soc/codecs/da7210.c
@@ -54,6 +54,8 @@
#define DA7210_DAC_EQ5 0x1B
#define DA7210_OUTMIX_L 0x1C
#define DA7210_OUTMIX_R 0x1D
+#define DA7210_OUT1_L 0x1E
+#define DA7210_OUT1_R 0x1F
#define DA7210_OUT2 0x20
#define DA7210_HP_L_VOL 0x21
#define DA7210_HP_R_VOL 0x22
@@ -187,6 +189,17 @@
#define DA7210_INPGA_MIN_VOL_NS 0x0A /* 10.5dB */
#define DA7210_AUX1_MIN_VOL_NS 0x35 /* 6dB */
+/* OUT1_L bit fields */
+#define DA7210_OUT1_L_EN (1 << 7)
+
+/* OUT1_R bit fields */
+#define DA7210_OUT1_R_EN (1 << 7)
+
+/* OUT2 bit fields */
+#define DA7210_OUT2_OUTMIX_R (1 << 5)
+#define DA7210_OUT2_OUTMIX_L (1 << 6)
+#define DA7210_OUT2_EN (1 << 7)
+
#define DA7210_VERSION "0.0.1"
/*
@@ -207,8 +220,23 @@ static const unsigned int hp_out_tlv[] = {
0x11, 0x3f, TLV_DB_SCALE_ITEM(-5400, 150, 0),
};
+static const unsigned int lineout_vol_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0x0, 0x10, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 1),
+ /* -54dB to 15dB */
+ 0x11, 0x3f, TLV_DB_SCALE_ITEM(-5400, 150, 0)
+};
+
+static const unsigned int mono_vol_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0x0, 0x2, TLV_DB_SCALE_ITEM(-1800, 0, 1),
+ /* -18dB to 6dB */
+ 0x3, 0x7, TLV_DB_SCALE_ITEM(-1800, 600, 0)
+};
+
static const DECLARE_TLV_DB_SCALE(eq_gain_tlv, -1050, 150, 0);
static const DECLARE_TLV_DB_SCALE(adc_eq_master_gain_tlv, -1800, 600, 1);
+static const DECLARE_TLV_DB_SCALE(dac_gain_tlv, -7725, 75, 0);
/* ADC and DAC high pass filter f0 value */
static const char const *da7210_hpf_cutoff_txt[] = {
@@ -307,6 +335,14 @@ static const struct snd_kcontrol_new da7210_snd_controls[] = {
SOC_DOUBLE_R_TLV("HeadPhone Playback Volume",
DA7210_HP_L_VOL, DA7210_HP_R_VOL,
0, 0x3F, 0, hp_out_tlv),
+ SOC_DOUBLE_R_TLV("Digital Playback Volume",
+ DA7210_DAC_L, DA7210_DAC_R,
+ 0, 0x77, 1, dac_gain_tlv),
+ SOC_DOUBLE_R_TLV("Lineout Playback Volume",
+ DA7210_OUT1_L, DA7210_OUT1_R,
+ 0, 0x3f, 0, lineout_vol_tlv),
+ SOC_SINGLE_TLV("Mono Playback Volume", DA7210_OUT2, 0, 0x7, 0,
+ mono_vol_tlv),
/* DAC Equalizer controls */
SOC_SINGLE("DAC EQ Switch", DA7210_DAC_EQ5, 7, 1, 0),
@@ -886,6 +922,12 @@ static int da7210_probe(struct snd_soc_codec *codec)
/* Enable ramp mode for DAC gain update */
snd_soc_write(codec, DA7210_SOFTMUTE, DA7210_RAMP_EN);
+ /* Enable Line out amplifiers */
+ snd_soc_write(codec, DA7210_OUT1_L, DA7210_OUT1_L_EN);
+ snd_soc_write(codec, DA7210_OUT1_R, DA7210_OUT1_R_EN);
+ snd_soc_write(codec, DA7210_OUT2, DA7210_OUT2_EN |
+ DA7210_OUT2_OUTMIX_L | DA7210_OUT2_OUTMIX_R);
+
/* Diable PLL and bypass it */
snd_soc_write(codec, DA7210_PLL, DA7210_PLL_FS_48000);
--
1.7.1
next reply other threads:[~2011-10-20 14:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-20 14:42 Ashish Chavan [this message]
2011-10-20 17:10 ` [alsa-devel] [PATCH v7 2/3] ASoC: da7210: Add support for line out and DAC Girdwood, Liam
2011-10-21 8:37 ` Ashish Chavan
2011-10-21 9:00 ` [alsa-devel] " Mark Brown
2011-10-21 9:49 ` Ashish Chavan
2011-10-21 10:24 ` Mark Brown
2011-10-21 11:05 ` Ashish Chavan
2011-10-21 11:12 ` Mark Brown
2011-10-21 11:32 ` Ashish Chavan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1319121769.24621.130.camel@matrix \
--to=ashish.chavan@kpitcummins.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=david.chen@diasemi.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).