From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Brown Subject: [PATCH 02/21] ASoC: Remove I2C ifdefs from WM8960 Date: Sat, 3 Dec 2011 21:33:10 +0000 Message-ID: <1322948009-27658-2-git-send-email-broonie@opensource.wolfsonmicro.com> References: <1322948009-27658-1-git-send-email-broonie@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from opensource.wolfsonmicro.com (opensource.wolfsonmicro.com [80.75.67.52]) by alsa0.perex.cz (Postfix) with ESMTP id 606C9243CC for ; Sat, 3 Dec 2011 22:33:38 +0100 (CET) In-Reply-To: <1322948009-27658-1-git-send-email-broonie@opensource.wolfsonmicro.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com, Mark Brown List-Id: alsa-devel@alsa-project.org The driver only supports I2C as the control interface. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8960.c | 6 ------ 1 files changed, 0 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index b04f808..1d057b6 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -994,7 +994,6 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8960 = { .reg_cache_default = wm8960_reg, }; -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) static __devinit int wm8960_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -1037,27 +1036,22 @@ static struct i2c_driver wm8960_i2c_driver = { .remove = __devexit_p(wm8960_i2c_remove), .id_table = wm8960_i2c_id, }; -#endif static int __init wm8960_modinit(void) { int ret = 0; -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) ret = i2c_add_driver(&wm8960_i2c_driver); if (ret != 0) { printk(KERN_ERR "Failed to register WM8960 I2C driver: %d\n", ret); } -#endif return ret; } module_init(wm8960_modinit); static void __exit wm8960_exit(void) { -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) i2c_del_driver(&wm8960_i2c_driver); -#endif } module_exit(wm8960_exit); -- 1.7.7.3