From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Guennadi Liakhovetski <g.liakhovetski@gmx.de>,
Liam Girdwood <lrg@ti.com>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 3/7] ASoC: Convert wm8978 to table based DAPM and control init
Date: Thu, 29 Dec 2011 11:49:11 +0000 [thread overview]
Message-ID: <1325159355-31686-3-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1325159355-31686-1-git-send-email-broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm8978.c | 25 ++++++++-----------------
1 files changed, 8 insertions(+), 17 deletions(-)
diff --git a/sound/soc/codecs/wm8978.c b/sound/soc/codecs/wm8978.c
index 2ba8f8c..36468f8 100644
--- a/sound/soc/codecs/wm8978.c
+++ b/sound/soc/codecs/wm8978.c
@@ -302,7 +302,7 @@ static const struct snd_soc_dapm_widget wm8978_dapm_widgets[] = {
SND_SOC_DAPM_OUTPUT("RSPK"),
};
-static const struct snd_soc_dapm_route audio_map[] = {
+static const struct snd_soc_dapm_route wm8978_dapm_routes[] = {
/* Output mixer */
{"Right Output Mixer", "PCM Playback Switch", "Right DAC"},
{"Right Output Mixer", "Aux Playback Switch", "RAUX"},
@@ -351,18 +351,6 @@ static const struct snd_soc_dapm_route audio_map[] = {
{"Left Input Mixer", "MicP Switch", "LMICP"},
};
-static int wm8978_add_widgets(struct snd_soc_codec *codec)
-{
- struct snd_soc_dapm_context *dapm = &codec->dapm;
-
- snd_soc_dapm_new_controls(dapm, wm8978_dapm_widgets,
- ARRAY_SIZE(wm8978_dapm_widgets));
- /* set up the WM8978 audio map */
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
- return 0;
-}
-
/* PLL divisors */
struct wm8978_pll_div {
u32 k;
@@ -975,10 +963,6 @@ static int wm8978_probe(struct snd_soc_codec *codec)
wm8978_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- snd_soc_add_controls(codec, wm8978_snd_controls,
- ARRAY_SIZE(wm8978_snd_controls));
- wm8978_add_widgets(codec);
-
return 0;
}
@@ -998,6 +982,13 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8978 = {
.reg_cache_size = ARRAY_SIZE(wm8978_reg),
.reg_word_size = sizeof(u16),
.reg_cache_default = wm8978_reg,
+
+ .controls = wm8978_snd_controls,
+ .num_controls = ARRAY_SIZE(wm8978_snd_controls),
+ .dapm_widgets = wm8978_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(wm8978_dapm_widgets),
+ .dapm_routes = wm8978_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(wm8978_dapm_routes),
};
static __devinit int wm8978_i2c_probe(struct i2c_client *i2c,
--
1.7.7.3
next prev parent reply other threads:[~2011-12-29 11:49 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-29 11:49 [PATCH 1/7] ASoC: Make WM8978 I2C usage unconditional Mark Brown
2011-12-29 11:49 ` [PATCH 2/7] ASoC: Remove unused control type from wm8978 driver Mark Brown
2011-12-29 11:49 ` Mark Brown [this message]
2011-12-29 11:49 ` [PATCH 4/7] ASoC: Convert wm8978 to devm_kzalloc() Mark Brown
2011-12-29 11:49 ` [PATCH 5/7] ASoC: Use standard cache sync for WM8978 Mark Brown
2011-12-29 11:49 ` [PATCH 6/7] ASoC: Convert wm8978 to direct regmap API usage Mark Brown
2011-12-29 11:49 ` [PATCH 7/7] ASoC: Push wm8978 reset down into the I2C probe Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1325159355-31686-3-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=g.liakhovetski@gmx.de \
--cc=lrg@ti.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).