alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Andrews <jon@jonshouse.co.uk>
To: alsa-devel@alsa-project.org
Subject: Trying to understand alsa
Date: Thu, 12 Jan 2012 23:36:53 +0000	[thread overview]
Message-ID: <1326411413.23310.46.camel@jonspc> (raw)


> If a packet arrives very late (and one will, eventually), you will
> underrun.  That's unavoidable. You can check for SND_PCM_STATE_XRUN
> from snd_pcm_state().  It's undocumented, but you need to call
> snd_pcm_avail_update() first to get an accurate reading from
> snd_pcm_state(). When an underrun occurs, recover with
> snd_pcm_recover() and then start writing data again.
> 

Ok, this my first attempt at recovery, still haven't solved buffering
problem so it underruns for each and every write.

Does this look roughly correct ?

Thanks,
Jon


#ifdef ALSA
                                // snd_pcm_writen - writes non interleaved (mono) samples
                                // bufs an explicit void* pointer type set to point at real sample buffer "audio"
                                // broken pipe indicates buffer underrun

                                numrecs=sizeof(audio)/2;                // 1k buffer, 512 samples 
                                //printf("%d \n", snd_pcm_wait(playback_handle[activeslot],1));
                                err = snd_pcm_writen (playback_handle[activeslot], &bufs, numrecs);
                                if (err<numrecs)
                                {
                                        fflush(stdout);
                                        if (err>0)
                                        {
                                                fprintf (stderr, "snd_pcm_writen: wrote only %d\n",err);
                                                fflush(stderr);
                                        }
                                        else
                                        {
                                                if (err == EPIPE)      
                                                {
                                                        errb=snd_pcm_recover(playback_handle[activeslot],err,0);                // error passed is resullt of writen
                                                        if (errb<0)
                                                        {
                                                                fprintf(stderr,"Failed to recover from underrun\n");
                                                                fflush(stderr);
                                                                exit(1);
                                                        }
                                                }
                                                else
                                                {
                                                        fprintf (stderr, "snd_pcm_writen:  write to audio interface failed (%s) (%d)\n", snd_strerror (err),err);
                                                        fflush(stdout);
                                                        fflush(stderr);
                                                        exit (1);
                                                }
                                        }
                                }
#endif

             reply	other threads:[~2012-01-12 23:33 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-12 23:36 Jonathan Andrews [this message]
  -- strict thread matches above, loose matches on Subject: below --
2012-01-12 23:45 Trying to understand alsa Jonathan Andrews
2012-01-13  1:25 ` Jonathan Andrews
2012-01-12 23:36 Jonathan Andrews
2012-01-12 21:44 Jonathan Andrews
2012-01-12 21:50 ` Fons Adriaensen
2012-01-12 22:12 ` Andrew Eikum
     [not found]   ` <1326410207.23310.17.camel@jonspc>
2012-01-13 15:10     ` Andrew Eikum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1326411413.23310.46.camel@jonspc \
    --to=jon@jonshouse.co.uk \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).