[PATCH 2/2] ARM: S3C64XX: Hook up supply for WM8994 LDOs on Littlemill

[Mark Brown <broonie@opensource.wolfsonmicro.com>]

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---

Kukjin, are you OK with this going via the MFD tree?  It depends on the
previous change.

 arch/arm/mach-s3c64xx/mach-crag6410-module.c |   12 ++++++++++--
 1 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 77c8342..6eb4b55 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -163,6 +163,14 @@ static const struct i2c_board_info wm1259_devs[] = {
 	},
 };
 
+static struct regulator_init_data wm8994_ldo1 = {
+	.supply_regulator = "WALLVDD",
+};
+
+static struct regulator_init_data wm8994_ldo2 = {
+	.supply_regulator = "WALLVDD",
+};
+
 static struct wm8994_pdata wm8994_pdata = {
 	.gpio_base = CODEC_GPIO_BASE,
 	.gpio_defaults = {
@@ -170,8 +178,8 @@ static struct wm8994_pdata wm8994_pdata = {
 	},
 	.irq_base = CODEC_IRQ_BASE,
 	.ldo = {
-		 { },
-		 { },
+		 { .init_data = &wm8994_ldo1, },
+		 { .init_data = &wm8994_ldo2, },
 	},
 };
 
-- 
1.7.9.1