From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Liam Girdwood <lrg@ti.com>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH] ASoC: samsung: Hook up AIF2 to the CODEC on Littlemill
Date: Wed, 18 Apr 2012 18:17:37 +0100 [thread overview]
Message-ID: <1334769457-20256-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
Connect the WM1250-EV1 baseband simulator on Littlemill systems up to
the CODEC AIF2 using the new CODEC<->CODEC link support, allowing a wider
range of use cases to be represented.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/soc/samsung/littlemill.c | 82 ++++++++++++++++++++++++++++++++++------
1 file changed, 70 insertions(+), 12 deletions(-)
diff --git a/sound/soc/samsung/littlemill.c b/sound/soc/samsung/littlemill.c
index e741685..71bff63 100644
--- a/sound/soc/samsung/littlemill.c
+++ b/sound/soc/samsung/littlemill.c
@@ -23,10 +23,10 @@ static int littlemill_set_bias_level(struct snd_soc_card *card,
struct snd_soc_dapm_context *dapm,
enum snd_soc_bias_level level)
{
- struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
+ struct snd_soc_dai *aif1_dai = card->rtd[0].codec_dai;
int ret;
- if (dapm->dev != codec_dai->dev)
+ if (dapm->dev != aif1_dai->dev)
return 0;
switch (level) {
@@ -36,7 +36,7 @@ static int littlemill_set_bias_level(struct snd_soc_card *card,
* then do so now, otherwise these are noops.
*/
if (dapm->bias_level == SND_SOC_BIAS_STANDBY) {
- ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1,
+ ret = snd_soc_dai_set_pll(aif1_dai, WM8994_FLL1,
WM8994_FLL_SRC_MCLK2, 32768,
sample_rate * 512);
if (ret < 0) {
@@ -44,7 +44,7 @@ static int littlemill_set_bias_level(struct snd_soc_card *card,
return ret;
}
- ret = snd_soc_dai_set_sysclk(codec_dai,
+ ret = snd_soc_dai_set_sysclk(aif1_dai,
WM8994_SYSCLK_FLL1,
sample_rate * 512,
SND_SOC_CLOCK_IN);
@@ -66,25 +66,58 @@ static int littlemill_set_bias_level_post(struct snd_soc_card *card,
struct snd_soc_dapm_context *dapm,
enum snd_soc_bias_level level)
{
- struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
+ struct snd_soc_dai *aif1_dai = card->rtd[0].codec_dai;
+ struct snd_soc_dai *aif2_dai = card->rtd[1].cpu_dai;
int ret;
- if (dapm->dev != codec_dai->dev)
+ if (dapm->dev != aif1_dai->dev)
return 0;
switch (level) {
case SND_SOC_BIAS_STANDBY:
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_MCLK2,
+ ret = snd_soc_dai_set_sysclk(aif2_dai, WM8994_SYSCLK_MCLK2,
32768, SND_SOC_CLOCK_IN);
if (ret < 0) {
- pr_err("Failed to switch away from FLL: %d\n", ret);
+ pr_err("Failed to switch away from FLL2: %d\n", ret);
return ret;
}
- ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1,
+ ret = snd_soc_dai_set_pll(aif2_dai, WM8994_FLL2,
0, 0, 0);
if (ret < 0) {
- pr_err("Failed to stop FLL: %d\n", ret);
+ pr_err("Failed to stop FLL2: %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_sysclk(aif1_dai, WM8994_SYSCLK_MCLK2,
+ 32768, SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ pr_err("Failed to switch away from FLL1: %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_pll(aif1_dai, WM8994_FLL1,
+ 0, 0, 0);
+ if (ret < 0) {
+ pr_err("Failed to stop FLL1: %d\n", ret);
+ return ret;
+ }
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ ret = snd_soc_dai_set_pll(aif2_dai, WM8994_FLL2,
+ WM8994_FLL_SRC_BCLK, 64 * 8000,
+ 8000 * 256);
+ if (ret < 0) {
+ pr_err("Failed to start FLL: %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_sysclk(aif2_dai, WM8994_SYSCLK_FLL2,
+ 8000 * 256,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ pr_err("Failed to set SYSCLK: %d\n", ret);
return ret;
}
break;
@@ -131,6 +164,14 @@ static struct snd_soc_ops littlemill_ops = {
.hw_params = littlemill_hw_params,
};
+static const struct snd_soc_pcm_stream baseband_params = {
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rate_min = 8000,
+ .rate_max = 8000,
+ .channels_min = 2,
+ .channels_max = 2,
+};
+
static struct snd_soc_dai_link littlemill_dai[] = {
{
.name = "CPU",
@@ -143,6 +184,17 @@ static struct snd_soc_dai_link littlemill_dai[] = {
| SND_SOC_DAIFMT_CBM_CFM,
.ops = &littlemill_ops,
},
+ {
+ .name = "Baseband",
+ .stream_name = "Baseband",
+ .cpu_dai_name = "wm8994-aif2",
+ .codec_dai_name = "wm1250-ev1",
+ .codec_name = "wm1250-ev1.1-0027",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+ | SND_SOC_DAIFMT_CBM_CFM,
+ .ignore_suspend = 1,
+ .params = &baseband_params,
+ },
};
static struct snd_soc_dapm_widget widgets[] = {
@@ -169,10 +221,16 @@ static struct snd_soc_jack littlemill_headset;
static int littlemill_late_probe(struct snd_soc_card *card)
{
struct snd_soc_codec *codec = card->rtd[0].codec;
- struct snd_soc_dai *codec_dai = card->rtd[0].codec_dai;
+ struct snd_soc_dai *aif1_dai = card->rtd[0].codec_dai;
+ struct snd_soc_dai *aif2_dai = card->rtd[1].cpu_dai;
int ret;
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_MCLK2,
+ ret = snd_soc_dai_set_sysclk(aif1_dai, WM8994_SYSCLK_MCLK2,
+ 32768, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_sysclk(aif2_dai, WM8994_SYSCLK_MCLK2,
32768, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
--
1.7.10
reply other threads:[~2012-04-18 17:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1334769457-20256-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=lrg@ti.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).