From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Liam Girdwood <lrg@ti.com>
Cc: alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH] ASoC: dapm: Move CODEC<->CODEC params off stack
Date: Thu, 26 Apr 2012 21:19:11 +0100 [thread overview]
Message-ID: <1335471551-12100-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
Reduce our stack consumption by moving the params off the stack, they
are reasonably large and might be an issue on platforms with small stacks.
Reported-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/soc/soc-dapm.c | 32 ++++++++++++++++++++------------
1 file changed, 20 insertions(+), 12 deletions(-)
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 75b3ad6..522032e 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -2987,7 +2987,7 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w,
struct snd_soc_dai *source, *sink;
const struct snd_soc_pcm_stream *config = w->params;
struct snd_pcm_substream substream;
- struct snd_pcm_hw_params params;
+ struct snd_pcm_hw_params *params = NULL;
u64 fmt;
int ret;
@@ -3017,17 +3017,21 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w,
}
/* Currently very limited parameter selection */
- memset(¶ms, 0, sizeof(params));
- snd_mask_set(hw_param_mask(¶ms, SNDRV_PCM_HW_PARAM_FORMAT), fmt);
+ params = kzalloc(sizeof(*params), GFP_KERNEL);
+ if (!params) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ snd_mask_set(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT), fmt);
- hw_param_interval(¶ms, SNDRV_PCM_HW_PARAM_RATE)->min =
+ hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE)->min =
config->rate_min;
- hw_param_interval(¶ms, SNDRV_PCM_HW_PARAM_RATE)->max =
+ hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE)->max =
config->rate_max;
- hw_param_interval(¶ms, SNDRV_PCM_HW_PARAM_CHANNELS)->min
+ hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS)->min
= config->channels_min;
- hw_param_interval(¶ms, SNDRV_PCM_HW_PARAM_CHANNELS)->max
+ hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS)->max
= config->channels_max;
memset(&substream, 0, sizeof(substream));
@@ -3037,22 +3041,22 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w,
if (source->driver->ops && source->driver->ops->hw_params) {
substream.stream = SNDRV_PCM_STREAM_CAPTURE;
ret = source->driver->ops->hw_params(&substream,
- ¶ms, source);
+ params, source);
if (ret != 0) {
dev_err(source->dev,
"hw_params() failed: %d\n", ret);
- return ret;
+ goto out;
}
}
if (sink->driver->ops && sink->driver->ops->hw_params) {
substream.stream = SNDRV_PCM_STREAM_PLAYBACK;
- ret = sink->driver->ops->hw_params(&substream, ¶ms,
+ ret = sink->driver->ops->hw_params(&substream, params,
sink);
if (ret != 0) {
dev_err(sink->dev,
"hw_params() failed: %d\n", ret);
- return ret;
+ goto out;
}
}
break;
@@ -3061,12 +3065,14 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w,
ret = snd_soc_dai_digital_mute(sink, 0);
if (ret != 0 && ret != -ENOTSUPP)
dev_warn(sink->dev, "Failed to unmute: %d\n", ret);
+ ret = 0;
break;
case SND_SOC_DAPM_PRE_PMD:
ret = snd_soc_dai_digital_mute(sink, 1);
if (ret != 0 && ret != -ENOTSUPP)
dev_warn(sink->dev, "Failed to mute: %d\n", ret);
+ ret = 0;
break;
default:
@@ -3074,7 +3080,9 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w,
return -EINVAL;
}
- return 0;
+out:
+ kfree(params);
+ return ret;
}
int snd_soc_dapm_new_pcm(struct snd_soc_card *card,
--
1.7.10
next reply other threads:[~2012-04-26 20:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-26 20:19 Mark Brown [this message]
2012-04-27 9:02 ` [PATCH] ASoC: dapm: Move CODEC<->CODEC params off stack Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335471551-12100-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).