alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Shawn Guo <shawn.guo@linaro.org>
To: alsa-devel@alsa-project.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
	linux-arm-kernel@lists.infradead.org,
	Dong Aisheng <dong.aisheng@linaro.org>,
	Shawn Guo <shawn.guo@linaro.org>
Subject: [PATCH 4/6] ASoC: mxs: add device tree support for mxs-saif
Date: Thu, 10 May 2012 16:42:11 +0800	[thread overview]
Message-ID: <1336639333-11561-5-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1336639333-11561-1-git-send-email-shawn.guo@linaro.org>

Add device tree probe for mxs-saif driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 .../devicetree/bindings/sound/mxs-saif.txt         |   36 ++++++++++
 sound/soc/mxs/mxs-saif.c                           |   74 +++++++++++++++-----
 2 files changed, 93 insertions(+), 17 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/mxs-saif.txt

diff --git a/Documentation/devicetree/bindings/sound/mxs-saif.txt b/Documentation/devicetree/bindings/sound/mxs-saif.txt
new file mode 100644
index 0000000..c37ba61
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mxs-saif.txt
@@ -0,0 +1,36 @@
+* Freescale MXS Serial Audio Interface (SAIF)
+
+Required properties:
+- compatible: Should be "fsl,<chip>-saif"
+- reg: Should contain registers location and length
+- interrupts: Should contain ERROR and DMA interrupts
+- fsl,saif-dma-channel: APBX DMA channel for the SAIF
+
+Optional properties:
+- fsl,saif-master: phandle to the master SAIF.  It's only required for
+  the slave SAIF.
+
+Note: Each SAIF controller should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+
+aliases {
+	saif0 = &saif0;
+	saif1 = &saif1;
+};
+
+saif0: saif@80042000 {
+	compatible = "fsl,imx28-saif";
+	reg = <0x80042000 2000>;
+	interrupts = <59 80>;
+	fsl,saif-dma-channel = <4>;
+};
+
+saif1: saif@80046000 {
+	compatible = "fsl,imx28-saif";
+	reg = <0x80046000 2000>;
+	interrupts = <58 81>;
+	fsl,saif-dma-channel = <5>;
+	fsl,saif-master = <&saif0>;
+};
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index fa80ee6..ca1e77c 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -18,6 +18,8 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/dma-mapping.h>
@@ -623,35 +625,58 @@ static irqreturn_t mxs_saif_irq(int irq, void *dev_id)
 
 static int __devinit mxs_saif_probe(struct platform_device *pdev)
 {
+	struct device_node *np = pdev->dev.of_node;
 	struct resource *iores, *dmares;
 	struct mxs_saif *saif;
 	struct mxs_saif_platform_data *pdata;
 	struct pinctrl *pinctrl;
 	int ret = 0;
 
-	if (pdev->id >= ARRAY_SIZE(mxs_saif))
+
+	if (!np && pdev->id >= ARRAY_SIZE(mxs_saif))
 		return -EINVAL;
 
 	saif = devm_kzalloc(&pdev->dev, sizeof(*saif), GFP_KERNEL);
 	if (!saif)
 		return -ENOMEM;
 
-	mxs_saif[pdev->id] = saif;
-	saif->id = pdev->id;
-
-	pdata = pdev->dev.platform_data;
-	if (pdata && !pdata->master_mode) {
-		saif->master_id = pdata->master_id;
-		if (saif->master_id < 0 ||
-			saif->master_id >= ARRAY_SIZE(mxs_saif) ||
-			saif->master_id == saif->id) {
-			dev_err(&pdev->dev, "get wrong master id\n");
-			return -EINVAL;
+	if (np) {
+		struct device_node *master;
+		saif->id = of_alias_get_id(np, "saif");
+		if (saif->id < 0)
+			return saif->id;
+		/*
+		 * If there is no "fsl,saif-master" phandle, it's a saif
+		 * master.  Otherwise, it's a slave and its phandle points
+		 * to the master.
+		 */
+		master = of_parse_phandle(np, "fsl,saif-master", 0);
+		if (!master) {
+			saif->master_id = saif->id;
+		} else {
+			saif->master_id = of_alias_get_id(master, "saif");
+			if (saif->master_id < 0)
+				return saif->master_id;
 		}
 	} else {
-		saif->master_id = saif->id;
+		saif->id = pdev->id;
+
+		pdata = pdev->dev.platform_data;
+		if (pdata && !pdata->master_mode) {
+			saif->master_id = pdata->master_id;
+			if (saif->master_id < 0 ||
+				saif->master_id >= ARRAY_SIZE(mxs_saif) ||
+				saif->master_id == saif->id) {
+				dev_err(&pdev->dev, "get wrong master id\n");
+				return -EINVAL;
+			}
+		} else {
+			saif->master_id = saif->id;
+		}
 	}
 
+	mxs_saif[saif->id] = saif;
+
 	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	if (IS_ERR(pinctrl)) {
 		ret = PTR_ERR(pinctrl);
@@ -676,11 +701,19 @@ static int __devinit mxs_saif_probe(struct platform_device *pdev)
 
 	dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
 	if (!dmares) {
-		dev_err(&pdev->dev, "failed to get dma resource: %d\n",
-			ret);
-		return -ENODEV;
+		/*
+		 * TODO: This is a temporary solution and should be changed
+		 * to use generic DMA binding later when the helplers get in.
+		 */
+		ret = of_property_read_u32(np, "fsl,saif-dma-channel",
+					   &saif->dma_param.chan_num);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to get dma channel\n");
+			return ret;
+		}
+	} else {
+		saif->dma_param.chan_num = dmares->start;
 	}
-	saif->dma_param.chan_num = dmares->start;
 
 	saif->irq = platform_get_irq(pdev, 0);
 	if (saif->irq < 0) {
@@ -730,6 +763,12 @@ static int __devexit mxs_saif_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id mxs_saif_dt_ids[] = {
+	{ .compatible = "fsl,imx28-saif", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_saif_dt_ids);
+
 static struct platform_driver mxs_saif_driver = {
 	.probe = mxs_saif_probe,
 	.remove = __devexit_p(mxs_saif_remove),
@@ -737,6 +776,7 @@ static struct platform_driver mxs_saif_driver = {
 	.driver = {
 		.name = "mxs-saif",
 		.owner = THIS_MODULE,
+		.of_match_table = mxs_saif_dt_ids,
 	},
 };
 
-- 
1.7.5.4

  parent reply	other threads:[~2012-05-10  8:42 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-10  8:42 [PATCH 0/6] Add device tree support for mxs audio Shawn Guo
2012-05-10  8:42 ` [PATCH 1/6] ASoC: mxs: add __devinit for mxs_saif_probe Shawn Guo
2012-05-10  8:58   ` Dong Aisheng
2012-05-10  9:32   ` Mark Brown
2012-05-10  8:42 ` [PATCH 2/6] ASoC: mxs: use devm_clk_get " Shawn Guo
2012-05-10  9:12   ` Dong Aisheng
2012-05-10  9:11     ` Shawn Guo
2012-05-10  9:13   ` Mark Brown
2012-05-10  9:17     ` Shawn Guo
2012-05-10  9:30       ` Mark Brown
2012-05-10 12:01         ` Shawn Guo
2012-05-10  8:42 ` [PATCH 3/6] ASoC: mxs: mxs-pcm does not need to be a plaform_driver Shawn Guo
2012-05-10  9:25   ` Dong Aisheng
2012-05-10 12:13     ` Shawn Guo
2012-05-10  8:42 ` Shawn Guo [this message]
2012-05-10  9:45   ` [PATCH 4/6] ASoC: mxs: add device tree support for mxs-saif Dong Aisheng
2012-05-10 12:14     ` Shawn Guo
2012-05-10  8:42 ` [PATCH 5/6] ASoC: mxs: add device tree support for mxs-sgtl5000 Shawn Guo
2012-05-10 11:16   ` Dong Aisheng
2012-05-10 12:20     ` Shawn Guo
2012-05-11  2:33       ` Dong Aisheng
2012-05-11  2:49         ` Shawn Guo
2012-05-11 14:14   ` Shawn Guo
2012-05-10  8:42 ` [PATCH 6/6] ARM: dts: enable audio support for imx28-evk Shawn Guo
2012-05-10 11:22   ` Dong Aisheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1336639333-11561-5-git-send-email-shawn.guo@linaro.org \
    --to=shawn.guo@linaro.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=dong.aisheng@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).