From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH] ALSA: hda: Make core jack usage unconditional
Date: Mon, 27 Aug 2012 11:53:23 -0700 [thread overview]
Message-ID: <1346093603-27675-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
Currently the HDA drivers have a Kconfig variable SND_HDA_INPUT_JACK
which disables jack reporting via the ALSA core jack API. This is bad
since (modulo the current problems with the HDA-specific reporting
API) it means that all reporting mechanisms will get disabled, not just
input. It's also not good that this is open coded in an individual
driver - if it's useful to have this control it's going to be equally
useful for any driver with jack detection support so should be handled
in the core.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/pci/hda/Kconfig | 9 +--------
sound/pci/hda/hda_jack.c | 8 --------
2 files changed, 1 insertion(+), 16 deletions(-)
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index 194d625..2c7f626 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -2,6 +2,7 @@ menuconfig SND_HDA_INTEL
tristate "Intel HD Audio"
select SND_PCM
select SND_VMASTER
+ select SND_JACK if INPUT=y || INPUT=SND
select SND_KCTL_JACK
help
Say Y here to include support for Intel "High Definition
@@ -62,14 +63,6 @@ config SND_HDA_INPUT_BEEP_MODE
Set 1 to always enable the digital beep interface for HD-audio by
default.
-config SND_HDA_INPUT_JACK
- bool "Support jack plugging notification via input layer"
- depends on INPUT=y || INPUT=SND
- select SND_JACK
- help
- Say Y here to enable the jack plugging notification via
- input layer.
-
config SND_HDA_PATCH_LOADER
bool "Support initialization patch loading for HD-audio"
depends on EXPERIMENTAL
diff --git a/sound/pci/hda/hda_jack.c b/sound/pci/hda/hda_jack.c
index aaccc02..0760d75 100644
--- a/sound/pci/hda/hda_jack.c
+++ b/sound/pci/hda/hda_jack.c
@@ -109,7 +109,6 @@ EXPORT_SYMBOL_HDA(snd_hda_jack_tbl_new);
void snd_hda_jack_tbl_clear(struct hda_codec *codec)
{
-#ifdef CONFIG_SND_HDA_INPUT_JACK
/* free jack instances manually when clearing/reconfiguring */
if (!codec->bus->shutdown && codec->jacktbl.list) {
struct hda_jack_tbl *jack = codec->jacktbl.list;
@@ -119,7 +118,6 @@ void snd_hda_jack_tbl_clear(struct hda_codec *codec)
snd_device_free(codec->bus->card, jack->jack);
}
}
-#endif
snd_array_free(&codec->jacktbl);
}
@@ -225,16 +223,13 @@ void snd_hda_jack_report_sync(struct hda_codec *codec)
continue;
state = get_jack_plug_state(jack->pin_sense);
snd_kctl_jack_report(codec->bus->card, jack->kctl, state);
-#ifdef CONFIG_SND_HDA_INPUT_JACK
if (jack->jack)
snd_jack_report(jack->jack,
state ? jack->type : 0);
-#endif
}
}
EXPORT_SYMBOL_HDA(snd_hda_jack_report_sync);
-#ifdef CONFIG_SND_HDA_INPUT_JACK
/* guess the jack type from the pin-config */
static int get_input_jack_type(struct hda_codec *codec, hda_nid_t nid)
{
@@ -261,7 +256,6 @@ static void hda_free_jack_priv(struct snd_jack *jack)
jacks->nid = 0;
jacks->jack = NULL;
}
-#endif
/**
* snd_hda_jack_add_kctl - Add a kctl for the given pin
@@ -292,7 +286,6 @@ static int __snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid,
state = snd_hda_jack_detect(codec, nid);
snd_kctl_jack_report(codec->bus->card, kctl, state);
-#ifdef CONFIG_SND_HDA_INPUT_JACK
if (!phantom_jack) {
jack->type = get_input_jack_type(codec, nid);
err = snd_jack_new(codec->bus->card, name, jack->type,
@@ -303,7 +296,6 @@ static int __snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid,
jack->jack->private_free = hda_free_jack_priv;
snd_jack_report(jack->jack, state ? jack->type : 0);
}
-#endif
return 0;
}
--
1.7.10.4
next reply other threads:[~2012-08-27 18:53 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-27 18:53 Mark Brown [this message]
2012-08-27 23:27 ` [PATCH] ALSA: hda: Make core jack usage unconditional David Henningsson
2012-08-28 3:23 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346093603-27675-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).