alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Wang Xingchao <xingchao.wang@intel.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, anssi.hannula@iki.fi, alanwww1@xbmc.org,
	fengguang.wu@intel.com, Wang Xingchao <xingchao.wang@intel.com>
Subject: [PATCH RFC 2/3] ALSA: HDMI - Enable HBR feature on Intel chips
Date: Wed,  5 Sep 2012 13:58:37 +0800	[thread overview]
Message-ID: <1346824718-18448-3-git-send-email-xingchao.wang@intel.com> (raw)
In-Reply-To: <1346824718-18448-1-git-send-email-xingchao.wang@intel.com>

HDMI channel remapping apparently effects HBR packets on Intel's chips.
For compressed non-PCM audio, use "straight-through" channel mapping.
For uncompressed multi-channel pcm audio, use normal channel mapping.

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
---
 sound/pci/hda/patch_hdmi.c |   36 ++++++++++++++++++++++++++++++++----
 1 file changed, 32 insertions(+), 4 deletions(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 6ac21d4..a87f8b2 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -34,6 +34,7 @@
 #include <linux/module.h>
 #include <sound/core.h>
 #include <sound/jack.h>
+#include <sound/asoundef.h>
 #include "hda_codec.h"
 #include "hda_local.h"
 #include "hda_jack.h"
@@ -60,6 +61,7 @@ struct hdmi_spec_per_cvt {
 	u32 rates;
 	u64 formats;
 	unsigned int maxbps;
+	bool non_pcm;
 };
 
 struct hdmi_spec_per_pin {
@@ -548,13 +550,17 @@ static void hdmi_debug_channel_mapping(struct hda_codec *codec,
 
 static void hdmi_setup_channel_mapping(struct hda_codec *codec,
 				       hda_nid_t pin_nid,
+				       hda_nid_t cvt_nid,
+				       bool non_pcm,
 				       int ca)
 {
 	int i;
 	int err;
 	int order;
+	int non_pcm_mapping[8];
 
 	order = get_channel_allocation_order(ca);
+
 	if (hdmi_channel_mapping[ca][1] == 0) {
 		for (i = 0; i < channel_allocations[order].channels; i++)
 			hdmi_channel_mapping[ca][i] = i | (i << 4);
@@ -562,10 +568,17 @@ static void hdmi_setup_channel_mapping(struct hda_codec *codec,
 			hdmi_channel_mapping[ca][i] = 0xf | (i << 4);
 	}
 
+	if (non_pcm) {
+		for (i = 0; i < channel_allocations[order].channels; i++)
+			non_pcm_mapping[i] = i | (i << 4);
+		for (; i < 8; i++)
+			non_pcm_mapping[i] = 0xf | (i << 4);
+	}
+
 	for (i = 0; i < 8; i++) {
 		err = snd_hda_codec_write(codec, pin_nid, 0,
 					  AC_VERB_SET_HDMI_CHAN_SLOT,
-					  hdmi_channel_mapping[ca][i]);
+					  non_pcm ? non_pcm_mapping[i] : hdmi_channel_mapping[ca][i]);
 		if (err) {
 			snd_printdd(KERN_NOTICE
 				    "HDMI: channel mapping failed\n");
@@ -699,15 +712,27 @@ static bool hdmi_infoframe_uptodate(struct hda_codec *codec, hda_nid_t pin_nid,
 }
 
 static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx,
-					struct snd_pcm_substream *substream)
+					hda_nid_t cvt_nid, struct snd_pcm_substream *substream)
 {
 	struct hdmi_spec *spec = codec->spec;
 	struct hdmi_spec_per_pin *per_pin = &spec->pins[pin_idx];
+	struct hdmi_spec_per_cvt *per_cvt;
+	struct hda_spdif_out *spdif;
 	hda_nid_t pin_nid = per_pin->pin_nid;
 	int channels = substream->runtime->channels;
 	struct hdmi_eld *eld;
 	int ca;
+	int cvt_idx;
 	union audio_infoframe ai;
+	bool non_pcm = false;
+
+	cvt_idx = cvt_nid_to_cvt_index(spec, cvt_nid);
+	per_cvt = &spec->cvts[cvt_idx];
+
+	mutex_lock(&codec->spdif_mutex);
+	spdif = snd_hda_spdif_out_of_nid(codec, cvt_nid);
+	non_pcm = !!(spdif->status & IEC958_AES0_NONAUDIO);
+	mutex_unlock(&codec->spdif_mutex);
 
 	eld = &spec->pins[pin_idx].sink_eld;
 	if (!eld->monitor_present)
@@ -750,12 +775,14 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, int pin_idx,
 			    "pin=%d channels=%d\n",
 			    pin_nid,
 			    channels);
-		hdmi_setup_channel_mapping(codec, pin_nid, ca);
+		hdmi_setup_channel_mapping(codec, pin_nid, cvt_nid, non_pcm, ca);
 		hdmi_stop_infoframe_trans(codec, pin_nid);
 		hdmi_fill_audio_infoframe(codec, pin_nid,
 					    ai.bytes, sizeof(ai));
 		hdmi_start_infoframe_trans(codec, pin_nid);
 	}
+
+	per_cvt->non_pcm = non_pcm;
 }
 
 
@@ -1077,6 +1104,7 @@ static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
 
 	per_cvt->cvt_nid = cvt_nid;
 	per_cvt->channels_min = 2;
+	per_cvt->non_pcm = false;
 	if (chans <= 16)
 		per_cvt->channels_max = chans;
 
@@ -1164,7 +1192,7 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 
 	hdmi_set_channel_count(codec, cvt_nid, substream->runtime->channels);
 
-	hdmi_setup_audio_infoframe(codec, pin_idx, substream);
+	hdmi_setup_audio_infoframe(codec, pin_idx, cvt_nid, substream);
 
 	pinctl = snd_hda_codec_read(codec, pin_nid, 0,
 				    AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
-- 
1.7.9.5

  parent reply	other threads:[~2012-09-05  6:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-05  5:58 [PATCH 0/3] HDMI HBR(High Bit Rate) Feature bug fix for Intel's Chips Wang Xingchao
2012-09-05  5:58 ` [PATCH RFC 1/3] ALSA: hdmi - fix channel_allocation array wrong order Wang Xingchao
2012-09-05  5:58 ` Wang Xingchao [this message]
2012-09-05  5:58 ` [PATCH RFC 3/3] ALSA: HDMI - Setup channel mapping for non_pcm audio Wang Xingchao
2012-09-05  6:30 ` [PATCH 0/3] HDMI HBR(High Bit Rate) Feature bug fix for Intel's Chips Takashi Iwai
2012-09-05  6:34   ` Wang Xingchao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346824718-18448-3-git-send-email-xingchao.wang@intel.com \
    --to=xingchao.wang@intel.com \
    --cc=alanwww1@xbmc.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=anssi.hannula@iki.fi \
    --cc=fengguang.wu@intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).