From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Liam Girdwood <lrg@ti.com>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2/4] ASoC: wm8523: Move regulator acquisition to I2C probe()
Date: Mon, 10 Sep 2012 17:08:00 +0800 [thread overview]
Message-ID: <1347268082-14993-2-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1347268082-14993-1-git-send-email-broonie@opensource.wolfsonmicro.com>
This is better style since we acquire all needed resources before we try
to do the ASoC card probe.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm8523.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/wm8523.c b/sound/soc/codecs/wm8523.c
index af2289e..c4c64e2 100644
--- a/sound/soc/codecs/wm8523.c
+++ b/sound/soc/codecs/wm8523.c
@@ -402,7 +402,7 @@ static int wm8523_resume(struct snd_soc_codec *codec)
static int wm8523_probe(struct snd_soc_codec *codec)
{
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
- int ret, i;
+ int ret;
wm8523->rate_constraint.list = &wm8523->rate_constraint_list[0];
wm8523->rate_constraint.count =
@@ -414,16 +414,6 @@ static int wm8523_probe(struct snd_soc_codec *codec)
return ret;
}
- for (i = 0; i < ARRAY_SIZE(wm8523->supplies); i++)
- wm8523->supplies[i].supply = wm8523_supply_names[i];
-
- ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8523->supplies),
- wm8523->supplies);
- if (ret != 0) {
- dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
- return ret;
- }
-
ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
wm8523->supplies);
if (ret != 0) {
@@ -471,7 +461,6 @@ static int wm8523_probe(struct snd_soc_codec *codec)
err_enable:
regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
err_get:
- regulator_bulk_free(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
return ret;
}
@@ -481,7 +470,6 @@ static int wm8523_remove(struct snd_soc_codec *codec)
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
wm8523_set_bias_level(codec, SND_SOC_BIAS_OFF);
- regulator_bulk_free(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
return 0;
}
@@ -514,13 +502,23 @@ static __devinit int wm8523_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8523_priv *wm8523;
- int ret;
+ int ret, i;
wm8523 = devm_kzalloc(&i2c->dev, sizeof(struct wm8523_priv),
GFP_KERNEL);
if (wm8523 == NULL)
return -ENOMEM;
+ for (i = 0; i < ARRAY_SIZE(wm8523->supplies); i++)
+ wm8523->supplies[i].supply = wm8523_supply_names[i];
+
+ ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8523->supplies),
+ wm8523->supplies);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
+ return ret;
+ }
+
i2c_set_clientdata(i2c, wm8523);
wm8523->control_type = SND_SOC_I2C;
--
1.7.10.4
next prev parent reply other threads:[~2012-09-10 9:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-10 9:07 [PATCH 1/4] ASoC: wm8523: Convert to devm_kzalloc() Mark Brown
2012-09-10 9:08 ` Mark Brown [this message]
2012-09-10 9:08 ` [PATCH 3/4] ASoC: wm8523: Convert to direct regmap API usage Mark Brown
2012-09-10 9:08 ` [PATCH 4/4] ASoC: wm8523: Move device ID verification and reset to I2C probe Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347268082-14993-2-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=lrg@ti.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).