From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>, Tony Lindgren <tony@atomide.com>,
Russell King <rmk+kernel@arm.linux.org.uk>,
Vinod Koul <vinod.koul@intel.com>, Dan Williams <djbw@fb.com>,
Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: alsa-devel@alsa-project.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>,
Ricardo Neri <ricardo.neri@ti.com>,
Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH v2 12/15] ASoC: OMAP: mcbsp, mcpdm, dmic: Let omap-pcm to pick the dma_type
Date: Thu, 13 Sep 2012 16:38:02 +0300 [thread overview]
Message-ID: <1347543485-339-13-git-send-email-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <1347543485-339-1-git-send-email-peter.ujfalusi@ti.com>
omap-pcm can figure out the correct dma_type based on the stream's format.
In this way we can get rid of the plat/dma.h include from these drivers.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
sound/soc/omap/omap-dmic.c | 2 --
sound/soc/omap/omap-mcbsp.c | 3 ---
sound/soc/omap/omap-mcpdm.c | 3 ---
3 files changed, 8 deletions(-)
diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c
index 60b7b8c..df0ff24 100644
--- a/sound/soc/omap/omap-dmic.c
+++ b/sound/soc/omap/omap-dmic.c
@@ -33,7 +33,6 @@
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/of_device.h>
-#include <plat/dma.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -63,7 +62,6 @@ struct omap_dmic {
*/
static struct omap_pcm_dma_data omap_dmic_dai_dma_params = {
.name = "DMIC capture",
- .data_type = OMAP_DMA_DATA_TYPE_S32,
};
static inline void omap_dmic_write(struct omap_dmic *dmic, u16 reg, u32 val)
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 5b3bacc..a230646 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -34,7 +34,6 @@
#include <sound/initval.h>
#include <sound/soc.h>
-#include <plat/dma.h>
#include <plat/mcbsp.h>
#include "mcbsp.h"
#include "omap-mcbsp.h"
@@ -234,11 +233,9 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
- dma_data->data_type = OMAP_DMA_DATA_TYPE_S16;
wlen = 16;
break;
case SNDRV_PCM_FORMAT_S32_LE:
- dma_data->data_type = OMAP_DMA_DATA_TYPE_S32;
wlen = 32;
break;
default:
diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c
index f90d5de..84743d4 100644
--- a/sound/soc/omap/omap-mcpdm.c
+++ b/sound/soc/omap/omap-mcpdm.c
@@ -40,7 +40,6 @@
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include "omap-mcpdm.h"
#include "omap-pcm.h"
@@ -71,11 +70,9 @@ struct omap_mcpdm {
static struct omap_pcm_dma_data omap_mcpdm_dai_dma_params[] = {
{
.name = "Audio playback",
- .data_type = OMAP_DMA_DATA_TYPE_S32,
},
{
.name = "Audio capture",
- .data_type = OMAP_DMA_DATA_TYPE_S32,
},
};
--
1.7.12
next prev parent reply other threads:[~2012-09-13 13:38 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-13 13:37 [PATCH v2 00/15] ASoC: OMAP: Convert to use dmaengine Peter Ujfalusi
2012-09-13 13:37 ` [PATCH v2 01/15] dmaengine: omap: Support for element mode in cyclic DMA Peter Ujfalusi
2012-09-13 13:37 ` [PATCH v2 02/15] dmaengine: omap: Add support for pause/resume in cyclic dma mode Peter Ujfalusi
2012-09-13 13:37 ` [PATCH v2 03/15] dmaengine: Add no_wakeup parameter to dmaengine_prep_dma_cyclic() Peter Ujfalusi
2012-09-13 15:27 ` Lars-Peter Clausen
2012-09-13 15:38 ` Russell King - ARM Linux
2012-09-14 3:27 ` Vinod Koul
2012-09-14 7:15 ` Peter Ujfalusi
2012-09-14 3:26 ` Vinod Koul
2012-09-14 7:18 ` Peter Ujfalusi
2012-09-14 8:13 ` Lars-Peter Clausen
2012-09-14 8:50 ` Vinod Koul
2012-09-14 9:28 ` Peter Ujfalusi
2012-09-14 9:38 ` Vinod Koul
2012-09-14 10:01 ` Russell King - ARM Linux
2012-09-14 7:12 ` Peter Ujfalusi
2012-09-13 13:37 ` [PATCH v2 04/15] dmaengine: Pass no_wakeup parameter via device_prep_dma_cyclic() callback Peter Ujfalusi
2012-09-14 3:24 ` Vinod Koul
2012-09-14 7:07 ` Peter Ujfalusi
2012-09-17 6:34 ` Shawn Guo
2012-09-17 7:16 ` Peter Ujfalusi
2012-09-17 7:23 ` Shawn Guo
2012-09-17 9:01 ` Linus Walleij
2012-09-18 8:31 ` Russell King - ARM Linux
2012-09-18 9:00 ` Vinod Koul
2012-09-18 12:22 ` Linus Walleij
2012-09-13 13:37 ` [PATCH v2 05/15] dmaengine: omap-dma: Add support for no_wakeup in cyclic mode Peter Ujfalusi
2012-09-13 13:37 ` [PATCH v2 06/15] ASoC: omap-mcbsp: Use sDMA packet mode instead of frame mode Peter Ujfalusi
2012-09-13 13:37 ` [PATCH v2 07/15] ASoC: omap-pcm: Select sDMA synchronization based on packet_size Peter Ujfalusi
2012-09-13 13:37 ` [PATCH v2 08/15] ASoC: OMAP: Remove sync_mode from omap_pcm_dma_data struct Peter Ujfalusi
2012-09-13 13:37 ` [PATCH v2 09/15] ASoC: omap-pcm: Prepare to configure the DMA data_type based on stream properties Peter Ujfalusi
2012-09-13 13:38 ` [PATCH v2 10/15] ARM: OMAP4: hwmod_data: Add resource names to McPDM memory ranges Peter Ujfalusi
2012-09-13 13:38 ` [PATCH v2 11/15] ASoC: omap-mcpdm: Use platform_get_resource_* to get resources Peter Ujfalusi
2012-09-13 13:38 ` Peter Ujfalusi [this message]
2012-09-13 13:38 ` [PATCH v2 13/15] ASoC: omap-pcm, omap-dmic: Change the use of omap_pcm_dma_data->data_type Peter Ujfalusi
2012-09-13 13:38 ` [PATCH v2 14/15] ASoC: OMAP: mcbsp, mcpdm, dmic, hdmi: Set dma_data at startup time Peter Ujfalusi
2012-09-13 13:38 ` [PATCH v2 15/15] ASoC: omap-pcm: Convert to use dmaengine Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347543485-339-13-git-send-email-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=djbw@fb.com \
--cc=jarkko.nikula@bitmer.com \
--cc=jkrzyszt@tis.icnet.pl \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@ti.com \
--cc=ricardo.neri@ti.com \
--cc=rmk+kernel@arm.linux.org.uk \
--cc=tony@atomide.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).