From: Dylan Reid <dgreid@chromium.org>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, Dylan Reid <dgreid@chromium.org>, zonque@gmail.com
Subject: [PATCH 2/3] ALSA: usb-audio: Don't require hw_params in endpoint.
Date: Mon, 17 Sep 2012 13:11:38 -0700 [thread overview]
Message-ID: <1347912699-9969-3-git-send-email-dgreid@chromium.org> (raw)
In-Reply-To: <1347912699-9969-1-git-send-email-dgreid@chromium.org>
Change the interface to configure an endpoint so that it doesn't require
a hw_params struct. This will allow it to be called from prepare
instead of hw_params, configuring it after system resume.
Change-Id: I9cded1644d3f6fee3c5707adffca4ef18c0befd7
Signed-off-by: Dylan Reid <dgreid@chromium.org>
---
sound/usb/endpoint.c | 31 ++++++++++++++++++-------------
sound/usb/endpoint.h | 5 ++++-
sound/usb/pcm.c | 16 +++++++++++++---
3 files changed, 35 insertions(+), 17 deletions(-)
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index a83a18d..152bfd4 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -567,20 +567,19 @@ static void release_urbs(struct snd_usb_endpoint *ep, int force)
* configure a data endpoint
*/
static int data_ep_set_params(struct snd_usb_endpoint *ep,
- struct snd_pcm_hw_params *hw_params,
+ snd_pcm_format_t pcm_format,
+ unsigned int channels,
+ unsigned int period_bytes,
struct audioformat *fmt,
struct snd_usb_endpoint *sync_ep)
{
unsigned int maxsize, i, urb_packs, total_packs, packs_per_ms;
- int period_bytes = params_period_bytes(hw_params);
- int format = params_format(hw_params);
int is_playback = usb_pipeout(ep->pipe);
- int frame_bits = snd_pcm_format_physical_width(params_format(hw_params)) *
- params_channels(hw_params);
+ int frame_bits = snd_pcm_format_physical_width(pcm_format) * channels;
ep->datainterval = fmt->datainterval;
ep->stride = frame_bits >> 3;
- ep->silence_value = format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0;
+ ep->silence_value = pcm_format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0;
/* calculate max. frequency */
if (ep->maxpacksize) {
@@ -693,7 +692,6 @@ out_of_memory:
* configure a sync endpoint
*/
static int sync_ep_set_params(struct snd_usb_endpoint *ep,
- struct snd_pcm_hw_params *hw_params,
struct audioformat *fmt)
{
int i;
@@ -736,7 +734,10 @@ out_of_memory:
* snd_usb_endpoint_set_params: configure an snd_usb_endpoint
*
* @ep: the snd_usb_endpoint to configure
- * @hw_params: the hardware parameters
+ * @pcm_format: the audio fomat.
+ * @channels: the number of audio channels.
+ * @period_bytes: the number of bytes in one alsa period.
+ * @rate: the frame rate.
* @fmt: the USB audio format information
* @sync_ep: the sync endpoint to use, if any
*
@@ -745,7 +746,10 @@ out_of_memory:
* An endpoint that is already running can not be reconfigured.
*/
int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
- struct snd_pcm_hw_params *hw_params,
+ snd_pcm_format_t pcm_format,
+ unsigned int channels,
+ unsigned int period_bytes,
+ unsigned int rate,
struct audioformat *fmt,
struct snd_usb_endpoint *sync_ep)
{
@@ -765,9 +769,9 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX);
if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL)
- ep->freqn = get_usb_full_speed_rate(params_rate(hw_params));
+ ep->freqn = get_usb_full_speed_rate(rate);
else
- ep->freqn = get_usb_high_speed_rate(params_rate(hw_params));
+ ep->freqn = get_usb_high_speed_rate(rate);
/* calculate the frequency in 16.16 format */
ep->freqm = ep->freqn;
@@ -777,10 +781,11 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
switch (ep->type) {
case SND_USB_ENDPOINT_TYPE_DATA:
- err = data_ep_set_params(ep, hw_params, fmt, sync_ep);
+ err = data_ep_set_params(ep, pcm_format, channels,
+ period_bytes, fmt, sync_ep);
break;
case SND_USB_ENDPOINT_TYPE_SYNC:
- err = sync_ep_set_params(ep, hw_params, fmt);
+ err = sync_ep_set_params(ep, fmt);
break;
default:
err = -EINVAL;
diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h
index cbbbdf2..6376ccf 100644
--- a/sound/usb/endpoint.h
+++ b/sound/usb/endpoint.h
@@ -9,7 +9,10 @@ struct snd_usb_endpoint *snd_usb_add_endpoint(struct snd_usb_audio *chip,
int ep_num, int direction, int type);
int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
- struct snd_pcm_hw_params *hw_params,
+ snd_pcm_format_t pcm_format,
+ unsigned int channels,
+ unsigned int period_bytes,
+ unsigned int rate,
struct audioformat *fmt,
struct snd_usb_endpoint *sync_ep);
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 786f7a0..62ab4fd 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -491,14 +491,24 @@ static int snd_usb_hw_params(struct snd_pcm_substream *substream,
mutex_lock(&subs->stream->chip->shutdown_mutex);
/* format changed */
stop_endpoints(subs, 0, 0, 0);
- ret = snd_usb_endpoint_set_params(subs->data_endpoint, hw_params, fmt,
+ ret = snd_usb_endpoint_set_params(subs->data_endpoint,
+ format,
+ channels,
+ subs->period_bytes,
+ rate,
+ fmt,
subs->sync_endpoint);
if (ret < 0)
goto unlock;
if (subs->sync_endpoint)
- ret = snd_usb_endpoint_set_params(subs->sync_endpoint,
- hw_params, fmt, NULL);
+ ret = snd_usb_endpoint_set_params(subs->data_endpoint,
+ format,
+ channels,
+ subs->period_bytes,
+ rate,
+ fmt,
+ NULL);
unlock:
mutex_unlock(&subs->stream->chip->shutdown_mutex);
}
--
1.7.12.146.g16d26b1
next prev parent reply other threads:[~2012-09-17 20:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-17 20:11 [PATCH 0/3] Allow suspend/resume with USB audio Dylan Reid
2012-09-17 20:11 ` [PATCH 1/3] ALSA: usb-audio: set period_bytes in substream Dylan Reid
2012-09-17 20:11 ` Dylan Reid [this message]
2012-09-17 20:11 ` [PATCH 3/3] ALSA: usb-audio: Move configuration to prepare Dylan Reid
2012-09-18 8:20 ` Takashi Iwai
2012-09-18 12:59 ` Takashi Iwai
2012-09-18 16:42 ` Dylan Reid
2012-09-18 12:47 ` Takashi Iwai
2012-09-18 16:41 ` Dylan Reid
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347912699-9969-3-git-send-email-dgreid@chromium.org \
--to=dgreid@chromium.org \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
--cc=zonque@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).