From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Liam Girdwood <lrg@ti.com>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 4/7] ASoC: wm2200: Fully plumb the DSPs into the routing map
Date: Fri, 5 Oct 2012 19:55:33 +0100 [thread overview]
Message-ID: <1349463336-10871-4-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1349463336-10871-1-git-send-email-broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm2200.c | 55 ++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 49 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c
index 1eafaae..f24ef0a 100644
--- a/sound/soc/codecs/wm2200.c
+++ b/sound/soc/codecs/wm2200.c
@@ -1056,6 +1056,20 @@ static int wm2200_mixer_values[] = {
static WM2200_MUX_CTL_DECL(name##_in3); \
static WM2200_MUX_CTL_DECL(name##_in4)
+#define WM2200_DSP_ENUMS(name, base_reg) \
+ static WM2200_MUX_ENUM_DECL(name##_aux1_enum, base_reg); \
+ static WM2200_MUX_ENUM_DECL(name##_aux2_enum, base_reg + 1); \
+ static WM2200_MUX_ENUM_DECL(name##_aux3_enum, base_reg + 2); \
+ static WM2200_MUX_ENUM_DECL(name##_aux4_enum, base_reg + 3); \
+ static WM2200_MUX_ENUM_DECL(name##_aux5_enum, base_reg + 4); \
+ static WM2200_MUX_ENUM_DECL(name##_aux6_enum, base_reg + 5); \
+ static WM2200_MUX_CTL_DECL(name##_aux1); \
+ static WM2200_MUX_CTL_DECL(name##_aux2); \
+ static WM2200_MUX_CTL_DECL(name##_aux3); \
+ static WM2200_MUX_CTL_DECL(name##_aux4); \
+ static WM2200_MUX_CTL_DECL(name##_aux5); \
+ static WM2200_MUX_CTL_DECL(name##_aux6);
+
static const struct snd_kcontrol_new wm2200_snd_controls[] = {
SOC_SINGLE("IN1 High Performance Switch", WM2200_IN1L_CONTROL,
WM2200_IN1_OSR_SHIFT, 1, 0),
@@ -1131,6 +1145,9 @@ WM2200_MIXER_ENUMS(DSP1R, WM2200_DSP1RMIX_INPUT_1_SOURCE);
WM2200_MIXER_ENUMS(DSP2L, WM2200_DSP2LMIX_INPUT_1_SOURCE);
WM2200_MIXER_ENUMS(DSP2R, WM2200_DSP2RMIX_INPUT_1_SOURCE);
+WM2200_DSP_ENUMS(DSP1, WM2200_DSP1AUX1MIX_INPUT_1_SOURCE);
+WM2200_DSP_ENUMS(DSP2, WM2200_DSP2AUX1MIX_INPUT_1_SOURCE);
+
WM2200_MIXER_ENUMS(LHPF1, WM2200_LHPF1MIX_INPUT_1_SOURCE);
WM2200_MIXER_ENUMS(LHPF2, WM2200_LHPF2MIX_INPUT_1_SOURCE);
@@ -1144,6 +1161,16 @@ WM2200_MIXER_ENUMS(LHPF2, WM2200_LHPF2MIX_INPUT_1_SOURCE);
WM2200_MUX(name_str " Input 4", &name##_in4_mux), \
SND_SOC_DAPM_MIXER(name_str " Mixer", SND_SOC_NOPM, 0, 0, NULL, 0)
+#define WM2200_DSP_WIDGETS(name, name_str) \
+ WM2200_MIXER_WIDGETS(name##L, name_str "L"), \
+ WM2200_MIXER_WIDGETS(name##R, name_str "R"), \
+ WM2200_MUX(name_str " Aux 1", &name##_aux1_mux), \
+ WM2200_MUX(name_str " Aux 2", &name##_aux2_mux), \
+ WM2200_MUX(name_str " Aux 3", &name##_aux3_mux), \
+ WM2200_MUX(name_str " Aux 4", &name##_aux4_mux), \
+ WM2200_MUX(name_str " Aux 5", &name##_aux5_mux), \
+ WM2200_MUX(name_str " Aux 6", &name##_aux6_mux)
+
#define WM2200_MIXER_INPUT_ROUTES(name) \
{ name, "Tone Generator", "Tone Generator" }, \
{ name, "AEC Loopback", "AEC Loopback" }, \
@@ -1187,6 +1214,19 @@ WM2200_MIXER_ENUMS(LHPF2, WM2200_LHPF2MIX_INPUT_1_SOURCE);
WM2200_MIXER_INPUT_ROUTES(name " Input 3"), \
WM2200_MIXER_INPUT_ROUTES(name " Input 4")
+#define WM2200_DSP_AUX_ROUTES(name) \
+ { name, NULL, name " Aux 1" }, \
+ { name, NULL, name " Aux 2" }, \
+ { name, NULL, name " Aux 3" }, \
+ { name, NULL, name " Aux 4" }, \
+ { name, NULL, name " Aux 5" }, \
+ { name, NULL, name " Aux 6" }, \
+ WM2200_MIXER_INPUT_ROUTES(name " Aux 1"), \
+ WM2200_MIXER_INPUT_ROUTES(name " Aux 2"), \
+ WM2200_MIXER_INPUT_ROUTES(name " Aux 3"), \
+ WM2200_MIXER_INPUT_ROUTES(name " Aux 4"), \
+ WM2200_MIXER_INPUT_ROUTES(name " Aux 5"), \
+ WM2200_MIXER_INPUT_ROUTES(name " Aux 6")
static const char *wm2200_aec_loopback_texts[] = {
"OUT1L", "OUT1R", "OUT2L", "OUT2R",
@@ -1260,8 +1300,10 @@ SND_SOC_DAPM_PGA("LHPF1", WM2200_HPLPF1_1, WM2200_LHPF1_ENA_SHIFT, 0,
SND_SOC_DAPM_PGA("LHPF2", WM2200_HPLPF2_1, WM2200_LHPF2_ENA_SHIFT, 0,
NULL, 0),
-SND_SOC_DAPM_PGA_E("DSP1", SND_SOC_NOPM, 0, 0, NULL, 0, NULL, 0),
-SND_SOC_DAPM_PGA_E("DSP2", SND_SOC_NOPM, 1, 0, NULL, 0, NULL, 0),
+SND_SOC_DAPM_PGA_E("DSP1", WM2200_DSP1_CONTROL_30, WM2200_DSP1_SYS_ENA_SHIFT,
+ 0, NULL, 0, NULL, 0),
+SND_SOC_DAPM_PGA_E("DSP2", WM2200_DSP2_CONTROL_30, WM2200_DSP2_SYS_ENA_SHIFT,
+ 0, NULL, 0, NULL, 0),
SND_SOC_DAPM_AIF_OUT("AIF1TX1", "Capture", 0,
WM2200_AUDIO_IF_1_22, WM2200_AIF1TX1_ENA_SHIFT, 0),
@@ -1329,10 +1371,8 @@ WM2200_MIXER_WIDGETS(EQR, "EQR"),
WM2200_MIXER_WIDGETS(LHPF1, "LHPF1"),
WM2200_MIXER_WIDGETS(LHPF2, "LHPF2"),
-WM2200_MIXER_WIDGETS(DSP1L, "DSP1L"),
-WM2200_MIXER_WIDGETS(DSP1R, "DSP1R"),
-WM2200_MIXER_WIDGETS(DSP2L, "DSP2L"),
-WM2200_MIXER_WIDGETS(DSP2R, "DSP2R"),
+WM2200_DSP_WIDGETS(DSP1, "DSP1"),
+WM2200_DSP_WIDGETS(DSP2, "DSP2"),
WM2200_MIXER_WIDGETS(AIF1TX1, "AIF1TX1"),
WM2200_MIXER_WIDGETS(AIF1TX2, "AIF1TX2"),
@@ -1434,6 +1474,9 @@ static const struct snd_soc_dapm_route wm2200_dapm_routes[] = {
WM2200_MIXER_ROUTES("DSP2", "DSP2L"),
WM2200_MIXER_ROUTES("DSP2", "DSP2R"),
+ WM2200_DSP_AUX_ROUTES("DSP1"),
+ WM2200_DSP_AUX_ROUTES("DSP2"),
+
WM2200_MIXER_ROUTES("OUT1L", "OUT1L"),
WM2200_MIXER_ROUTES("OUT1R", "OUT1R"),
WM2200_MIXER_ROUTES("OUT2L", "OUT2L"),
--
1.7.10.4
next prev parent reply other threads:[~2012-10-05 18:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-05 18:55 [PATCH 1/7] ASoC: wm2200: Convert to devm APIs Mark Brown
2012-10-05 18:55 ` [PATCH 2/7] ASoC: wm2200: Implement AEC loopback support Mark Brown
2012-10-05 18:55 ` [PATCH 3/7] ASoC: wm2200: Map DSPs into regmap Mark Brown
2012-10-05 18:55 ` Mark Brown [this message]
2012-10-05 18:55 ` [PATCH 5/7] ASoC: wm2200: Initial DSP support Mark Brown
2012-10-05 18:55 ` [PATCH 6/7] ASoC: wm2200: Provide initial coefficient loading Mark Brown
2012-10-05 18:55 ` [PATCH 7/7] ASoC: wm2200: Add names for ranges Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349463336-10871-4-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=lrg@ti.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).