alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Liam Girdwood <lrg@ti.com>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
	Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH] ASoC: wm8994: Lower AIFnCLK divisor when dropping to 32kHz
Date: Wed, 24 Oct 2012 10:57:06 +0100	[thread overview]
Message-ID: <1351072626-29087-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)

When lowering SYSCLK to 50kHz for accessory detection also lower the
AIFnCLK divisor to normalise the clocking configuration within the
device. This will not disrupt audio as we cannot support active audio
with such a low SYSCLK.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/wm8994.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 0932d7a..c16a9a3 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -2443,6 +2443,18 @@ static int wm8994_set_dai_sysclk(struct snd_soc_dai *dai,
 
 	configure_clock(codec);
 
+	/*
+	 * If SYSCLK will be less than 50kHz adjust AIFnCLK dividers
+	 * for detection.
+	 */
+	if (max(wm8994->aifclk[0], wm8994->aifclk[1]) < 50000) {
+		dev_dbg(codec->dev, "Configuring AIFs for 128fs\n");
+		snd_soc_update_bits(codec, WM8994_AIF1_RATE,
+				    WM8994_AIF1CLK_RATE_MASK, 0x1);
+		snd_soc_update_bits(codec, WM8994_AIF2_RATE,
+				    WM8994_AIF2CLK_RATE_MASK, 0x1);
+	}
+
 	return 0;
 }
 
-- 
1.7.10.4

                 reply	other threads:[~2012-10-24 10:07 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351072626-29087-1-git-send-email-broonie@opensource.wolfsonmicro.com \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=lrg@ti.com \
    --cc=patches@opensource.wolfsonmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).