From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>,
Liam Girdwood <liam.r.girdwood@intel.com>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2/4] mfd: wm5102: Map in additional FLL control registers
Date: Wed, 6 Mar 2013 14:28:14 +0800 [thread overview]
Message-ID: <1362551296-14920-2-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1362551296-14920-1-git-send-email-broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm5102-tables.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index f3c2e9a..768fd42 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -291,12 +291,14 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */
{ 0x00000177, 0x0181 }, /* R375 - FLL1 Loop Filter Test 1 */
{ 0x00000178, 0x0000 }, /* R376 - FLL1 NCO Test 0 */
+ { 0x00000179, 0x0000 }, /* R377 - FLL1 Control 7 */
{ 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */
{ 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */
{ 0x00000183, 0x0000 }, /* R387 - FLL1 Synchroniser 3 */
{ 0x00000184, 0x0000 }, /* R388 - FLL1 Synchroniser 4 */
{ 0x00000185, 0x0000 }, /* R389 - FLL1 Synchroniser 5 */
{ 0x00000186, 0x0000 }, /* R390 - FLL1 Synchroniser 6 */
+ { 0x00000187, 0x0001 }, /* R391 - FLL1 Synchroniser 7 */
{ 0x00000189, 0x0000 }, /* R393 - FLL1 Spread Spectrum */
{ 0x0000018A, 0x0004 }, /* R394 - FLL1 GPIO Clock */
{ 0x00000191, 0x0000 }, /* R401 - FLL2 Control 1 */
@@ -307,12 +309,14 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */
{ 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */
{ 0x00000198, 0x0000 }, /* R408 - FLL2 NCO Test 0 */
+ { 0x00000199, 0x0000 }, /* R409 - FLL2 Control 7 */
{ 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */
{ 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */
{ 0x000001A3, 0x0000 }, /* R419 - FLL2 Synchroniser 3 */
{ 0x000001A4, 0x0000 }, /* R420 - FLL2 Synchroniser 4 */
{ 0x000001A5, 0x0000 }, /* R421 - FLL2 Synchroniser 5 */
{ 0x000001A6, 0x0000 }, /* R422 - FLL2 Synchroniser 6 */
+ { 0x000001A7, 0x0001 }, /* R423 - FLL2 Synchroniser 7 */
{ 0x000001A9, 0x0000 }, /* R425 - FLL2 Spread Spectrum */
{ 0x000001AA, 0x0004 }, /* R426 - FLL2 GPIO Clock */
{ 0x00000200, 0x0006 }, /* R512 - Mic Charge Pump 1 */
@@ -1056,12 +1060,14 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_FLL1_CONTROL_6:
case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
case ARIZONA_FLL1_NCO_TEST_0:
+ case ARIZONA_FLL1_CONTROL_7:
case ARIZONA_FLL1_SYNCHRONISER_1:
case ARIZONA_FLL1_SYNCHRONISER_2:
case ARIZONA_FLL1_SYNCHRONISER_3:
case ARIZONA_FLL1_SYNCHRONISER_4:
case ARIZONA_FLL1_SYNCHRONISER_5:
case ARIZONA_FLL1_SYNCHRONISER_6:
+ case ARIZONA_FLL1_SYNCHRONISER_7:
case ARIZONA_FLL1_SPREAD_SPECTRUM:
case ARIZONA_FLL1_GPIO_CLOCK:
case ARIZONA_FLL2_CONTROL_1:
@@ -1072,12 +1078,14 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_FLL2_CONTROL_6:
case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
case ARIZONA_FLL2_NCO_TEST_0:
+ case ARIZONA_FLL2_CONTROL_7:
case ARIZONA_FLL2_SYNCHRONISER_1:
case ARIZONA_FLL2_SYNCHRONISER_2:
case ARIZONA_FLL2_SYNCHRONISER_3:
case ARIZONA_FLL2_SYNCHRONISER_4:
case ARIZONA_FLL2_SYNCHRONISER_5:
case ARIZONA_FLL2_SYNCHRONISER_6:
+ case ARIZONA_FLL2_SYNCHRONISER_7:
case ARIZONA_FLL2_SPREAD_SPECTRUM:
case ARIZONA_FLL2_GPIO_CLOCK:
case ARIZONA_MIC_CHARGE_PUMP_1:
--
1.7.10.4
next parent reply other threads:[~2013-03-06 6:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1362551296-14920-1-git-send-email-broonie@opensource.wolfsonmicro.com>
2013-03-06 6:28 ` Mark Brown [this message]
[not found] ` <20130408162223.GC24058@zurbaran>
2013-04-11 17:22 ` [PATCH 2/4] mfd: wm5102: Map in additional FLL control registers Mark Brown
2013-03-06 6:28 ` [PATCH 3/4] ASoC: arizona: Increase FLL synchroniser bandwidth for high frequencies Mark Brown
2013-03-06 6:28 ` [PATCH 4/4] ASoC: arizona: Optimise FLL loop gains Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362551296-14920-2-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=liam.r.girdwood@intel.com \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox