From: Eldad Zack <eldad@fogrefinery.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.de>,
Clemens Ladisch <clemens@ladisch.de>,
Daniel Mack <zonque@gmail.com>
Cc: alsa-devel@alsa-project.org, Eldad Zack <eldad@fogrefinery.com>
Subject: [PATCH 00/10] UAC2: Automatic clock switching
Date: Sun, 31 Mar 2013 17:52:22 +0200 [thread overview]
Message-ID: <1364745152-1762-1-git-send-email-eldad@fogrefinery.com> (raw)
Hi,
This patch series is intended for-next.
It provides automatic clock switching for UAC2 devices (patches #6-#8).
If the current selected clock is not valid, other clocks will be checked
and the first (indexwise) valid clock will be used.
Patch #8 provides a module flag to turn this logic off, since
in some use cases (e.g., studio work) it might not be desired.
But I think most users want their audio devices to "just work",
so the default is on.
To make the change more obvious, I first moved the validity check
around without changing any logic (#6).
Patch #10 adds support for clocks with read-only sample frequency
control.
All other patches included are trivial clean up patches.
I'd appreciate a review and/or testing this patch series.
This applies to all UAC2 devices, so please let me know if anyone
sees any issue.
Tested with mainline.
Applies against mainline (3.9-rc4), HEAD at 46a1f21a679abaaeae6db9969963dc998c9f1c1c
Applies against Takashi's for-next, HEAD at 4abdbd1c2c1832e7270e546307ffb3e56b286db2
Cheers,
Eldad Zack (10):
ALSA: usb-audio: convert list_for_each to entry variant
ALSA: usb-audio: neaten MODULE_DEVICE_TABLE placement
ALSA: usb-audio: neaten EXPORT_SYMBOLS placement
ALSA: usb-audio: spelling correction
ALSA: usb-audio: use endianness macros
ALSA: usb-audio: UAC2: do clock validity check earlier
ALSA: usb-audio: UAC2: try to find and switch to valid clock
ALSA: usb-audio: UAC2: auto clock selection module param
ALSA: usb-audio: show err in set_sample_rate_v2 debug
ALSA: usb-audio: UAC2: support read-only freq control
sound/usb/card.c | 11 ++--
sound/usb/clock.c | 150 ++++++++++++++++++++++++++++++++++++++-------------
sound/usb/clock.h | 3 +-
sound/usb/endpoint.c | 18 +++----
sound/usb/endpoint.h | 2 +-
sound/usb/format.c | 2 +-
sound/usb/midi.c | 12 ++---
sound/usb/pcm.c | 32 ++++-------
sound/usb/proc.c | 7 ++-
sound/usb/stream.c | 12 ++---
sound/usb/usbaudio.h | 1 +
11 files changed, 155 insertions(+), 95 deletions(-)
--
1.8.1.5
next reply other threads:[~2013-03-31 15:52 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-31 15:52 Eldad Zack [this message]
2013-03-31 15:52 ` [PATCH 01/10] ALSA: usb-audio: convert list_for_each to entry variant Eldad Zack
2013-03-31 15:52 ` [PATCH 02/10] ALSA: usb-audio: neaten MODULE_DEVICE_TABLE placement Eldad Zack
2013-03-31 15:52 ` [PATCH 03/10] ALSA: usb-audio: neaten EXPORT_SYMBOLS placement Eldad Zack
2013-03-31 15:52 ` [PATCH 04/10] ALSA: usb-audio: spelling correction Eldad Zack
2013-03-31 15:52 ` [PATCH 05/10] ALSA: usb-audio: use endianness macros Eldad Zack
2013-03-31 16:06 ` Clemens Ladisch
2013-03-31 17:15 ` Eldad Zack
2013-03-31 17:30 ` Clemens Ladisch
2013-04-05 18:36 ` Eldad Zack
2013-03-31 15:52 ` [PATCH 06/10] ALSA: usb-audio: UAC2: do clock validity check earlier Eldad Zack
2013-04-01 8:16 ` Torstein Hegge
2013-04-01 22:36 ` Eldad Zack
2013-04-02 8:38 ` Takashi Iwai
2013-03-31 15:52 ` [PATCH 07/10] ALSA: usb-audio: UAC2: try to find and switch to valid clock Eldad Zack
2013-04-02 8:46 ` Takashi Iwai
2013-04-02 20:20 ` Eldad Zack
2013-03-31 15:52 ` [PATCH 08/10] ALSA: usb-audio: UAC2: auto clock selection module param Eldad Zack
2013-04-02 8:51 ` Takashi Iwai
2013-04-02 20:27 ` Eldad Zack
2013-03-31 15:52 ` [PATCH 09/10] ALSA: usb-audio: show err in set_sample_rate_v2 debug Eldad Zack
2013-03-31 15:52 ` [PATCH 10/10] ALSA: usb-audio: UAC2: support read-only freq control Eldad Zack
2013-04-01 8:17 ` Torstein Hegge
2013-04-01 22:45 ` Eldad Zack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364745152-1762-1-git-send-email-eldad@fogrefinery.com \
--to=eldad@fogrefinery.com \
--cc=alsa-devel@alsa-project.org \
--cc=clemens@ladisch.de \
--cc=perex@perex.cz \
--cc=tiwai@suse.de \
--cc=zonque@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox