Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Lars-Peter Clausen <lars@metafoo.de>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: Ola Lilja <ola.o.lilja@stericsson.com>,
	alsa-devel@alsa-project.org,
	Rajeev Kumar <rajeev-dlh.kumar@st.com>,
	Russell King <linux@arm.linux.org.uk>,
	Ryan Mallon <rmallon@gmail.com>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Vinod Koul <vinod.koul@intel.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Hartley Sweeten <hsweeten@visionengravers.com>,
	Laxman Dewangan <ldewangan@nvidia.com>,
	Sebastien Guiriec <s-guiriec@ti.com>,
	Markus Pargmann <mpa@pengutronix.de>,
	Shawn Guo <shawn.guo@linaro.org>,
	Lee Jones <lee.jones@linaro.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Jarkko Nikula <jarkko.nikula@bitmer.com>
Subject: [PATCH 07/17] ASoC: spear: Use generic dmaengine PCM
Date: Mon, 15 Apr 2013 19:19:54 +0200	[thread overview]
Message-ID: <1366046404-8759-8-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1366046404-8759-1-git-send-email-lars@metafoo.de>

Use the generic dmaengine PCM driver instead of a custom implementation.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
 sound/soc/spear/spear_pcm.c | 152 +++++---------------------------------------
 1 file changed, 15 insertions(+), 137 deletions(-)

diff --git a/sound/soc/spear/spear_pcm.c b/sound/soc/spear/spear_pcm.c
index 2fbd489..4707f2b 100644
--- a/sound/soc/spear/spear_pcm.c
+++ b/sound/soc/spear/spear_pcm.c
@@ -13,19 +13,13 @@
 
 #include <linux/module.h>
 #include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/scatterlist.h>
-#include <linux/slab.h>
-#include <sound/core.h>
 #include <sound/dmaengine_pcm.h>
 #include <sound/pcm.h>
-#include <sound/pcm_params.h>
 #include <sound/soc.h>
 #include <sound/spear_dma.h>
 
-static struct snd_pcm_hardware spear_pcm_hardware = {
+static const struct snd_pcm_hardware spear_pcm_hardware = {
 	.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
 		 SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
 		 SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
@@ -37,149 +31,33 @@ static struct snd_pcm_hardware spear_pcm_hardware = {
 	.fifo_size = 0, /* fifo size in bytes */
 };
 
-static int spear_pcm_hw_params(struct snd_pcm_substream *substream,
-		struct snd_pcm_hw_params *params)
+static struct dma_chan *spear_pcm_request_chan(struct snd_soc_pcm_runtime *rtd,
+	struct snd_pcm_substream *substream)
 {
-	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+	struct spear_dma_data *dma_data;
 
-	return 0;
-}
-
-static int spear_pcm_hw_free(struct snd_pcm_substream *substream)
-{
-	snd_pcm_set_runtime_buffer(substream, NULL);
-
-	return 0;
-}
-
-static int spear_pcm_open(struct snd_pcm_substream *substream)
-{
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-
-	struct spear_dma_data *dma_data = (struct spear_dma_data *)
-		snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
-	int ret;
-
-	ret = snd_soc_set_runtime_hwparams(substream, &spear_pcm_hardware);
-	if (ret)
-		return ret;
+	dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
 
-	return snd_dmaengine_pcm_open_request_chan(substream, dma_data->filter,
-				dma_data);
+	return snd_dmaengine_pcm_request_channel(dma_data->filter, dma_data);
 }
 
-static int spear_pcm_mmap(struct snd_pcm_substream *substream,
-		struct vm_area_struct *vma)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-
-	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
-			runtime->dma_area, runtime->dma_addr,
-			runtime->dma_bytes);
-}
-
-static struct snd_pcm_ops spear_pcm_ops = {
-	.open		= spear_pcm_open,
-	.close		= snd_dmaengine_pcm_close_release_chan,
-	.ioctl		= snd_pcm_lib_ioctl,
-	.hw_params	= spear_pcm_hw_params,
-	.hw_free	= spear_pcm_hw_free,
-	.trigger	= snd_dmaengine_pcm_trigger,
-	.pointer	= snd_dmaengine_pcm_pointer,
-	.mmap		= spear_pcm_mmap,
-};
-
-static int
-spear_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream,
-		size_t size)
-{
-	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
-	struct snd_dma_buffer *buf = &substream->dma_buffer;
-
-	buf->dev.type = SNDRV_DMA_TYPE_DEV;
-	buf->dev.dev = pcm->card->dev;
-	buf->private_data = NULL;
-
-	buf->area = dma_alloc_writecombine(pcm->card->dev, size,
-			&buf->addr, GFP_KERNEL);
-	if (!buf->area)
-		return -ENOMEM;
-
-	dev_info(buf->dev.dev,
-			" preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
-			(void *)buf->area, (void *)buf->addr, size);
-
-	buf->bytes = size;
-	return 0;
-}
-
-static void spear_pcm_free(struct snd_pcm *pcm)
-{
-	struct snd_pcm_substream *substream;
-	struct snd_dma_buffer *buf;
-	int stream;
-
-	for (stream = 0; stream < 2; stream++) {
-		substream = pcm->streams[stream].substream;
-		if (!substream)
-			continue;
-
-		buf = &substream->dma_buffer;
-		if (!buf || !buf->area)
-			continue;
-
-		dma_free_writecombine(pcm->card->dev, buf->bytes,
-				buf->area, buf->addr);
-		buf->area = NULL;
-	}
-}
-
-static u64 spear_pcm_dmamask = DMA_BIT_MASK(32);
-
-static int spear_pcm_new(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_card *card = rtd->card->snd_card;
-	int ret;
-
-	if (!card->dev->dma_mask)
-		card->dev->dma_mask = &spear_pcm_dmamask;
-	if (!card->dev->coherent_dma_mask)
-		card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
-
-	if (rtd->cpu_dai->driver->playback.channels_min) {
-		ret = spear_pcm_preallocate_dma_buffer(rtd->pcm,
-				SNDRV_PCM_STREAM_PLAYBACK,
-				spear_pcm_hardware.buffer_bytes_max);
-		if (ret)
-			return ret;
-	}
-
-	if (rtd->cpu_dai->driver->capture.channels_min) {
-		ret = spear_pcm_preallocate_dma_buffer(rtd->pcm,
-				SNDRV_PCM_STREAM_CAPTURE,
-				spear_pcm_hardware.buffer_bytes_max);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
-static struct snd_soc_platform_driver spear_soc_platform = {
-	.ops		=	&spear_pcm_ops,
-	.pcm_new	=	spear_pcm_new,
-	.pcm_free	=	spear_pcm_free,
+static const struct snd_dmaengine_pcm_config spear_dmaengine_pcm_config = {
+	.pcm_hardware = &spear_pcm_hardware,
+	.compat_request_channel = spear_pcm_request_chan,
+	.prealloc_buffer_size = 16 * 1024,
 };
 
 static int spear_soc_platform_probe(struct platform_device *pdev)
 {
-	return snd_soc_register_platform(&pdev->dev, &spear_soc_platform);
+	return snd_dmaengine_pcm_register(&pdev->dev,
+		&spear_dmaengine_pcm_config,
+		SND_DMAENGINE_PCM_FLAG_NO_DT |
+		SND_DMAENGINE_PCM_FLAG_COMPAT);
 }
 
 static int spear_soc_platform_remove(struct platform_device *pdev)
 {
-	snd_soc_unregister_platform(&pdev->dev);
-
+	snd_dmaengine_pcm_unregister(&pdev->dev);
 	return 0;
 }
 
-- 
1.8.0

  parent reply	other threads:[~2013-04-15 17:21 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-15 17:19 [PATCH 00/17] ASoC: Towards a generic dmaengine PCM driver Lars-Peter Clausen
2013-04-15 17:19 ` [PATCH 01/17] ASoC: dmaengine-pcm: Make requesting the DMA channel at PCM open optional Lars-Peter Clausen
     [not found]   ` <516C8D1B.3070901@gmail.com>
2013-04-16  5:33     ` Lars-Peter Clausen
2013-04-17 13:19   ` Mark Brown
2013-04-15 17:19 ` [PATCH 02/17] ASoC: Add snd_soc_{add, remove}_platform Lars-Peter Clausen
2013-04-17 13:18   ` Mark Brown
2013-04-17 13:20   ` Mark Brown
2013-04-15 17:19 ` [PATCH 03/17] ASoC: Add a generic dmaengine_pcm driver Lars-Peter Clausen
2013-04-15 23:15   ` Stephen Warren
2013-04-16  5:31     ` Lars-Peter Clausen
2013-04-16 20:02       ` Stephen Warren
2013-04-16 14:11   ` Markus Pargmann
2013-04-16 14:35     ` Lee Jones
2013-04-16 14:42       ` Markus Pargmann
2013-04-16 14:55         ` Lee Jones
2013-04-16 15:46       ` Lars-Peter Clausen
2013-04-17  9:48   ` Peter Ujfalusi
2013-04-17 10:48     ` Lars-Peter Clausen
2013-04-17 13:06       ` Peter Ujfalusi
2013-04-17 18:45         ` Lars-Peter Clausen
2013-04-18  7:30           ` Peter Ujfalusi
2013-04-17 13:21   ` Mark Brown
2013-04-15 17:19 ` [PATCH 04/17] ASoC: dmaengine_pcm: Add support for compat platforms Lars-Peter Clausen
2013-04-17 13:21   ` Mark Brown
2013-04-15 17:19 ` [PATCH 05/17] ASoC: tegra: Use generic dmaengine PCM Lars-Peter Clausen
2013-04-17 13:25   ` Mark Brown
2013-04-15 17:19 ` [PATCH 06/17] ASoC: spear: Setup dma data in DAI probe Lars-Peter Clausen
2013-04-15 17:19 ` Lars-Peter Clausen [this message]
2013-04-15 17:19 ` [PATCH 08/17] ASoC: dmaengine-pcm: Add support for platforms which can't report residue Lars-Peter Clausen
2013-04-15 17:19 ` [PATCH 09/17] ASoC: mxs: Setup dma data in DAI probe Lars-Peter Clausen
2013-04-15 17:19 ` [PATCH 10/17] ASoC: mxs: Use generic dmaengine PCM Lars-Peter Clausen
2013-04-17  8:43   ` Shawn Guo
2013-04-17  9:28     ` Lars-Peter Clausen
2013-04-17 13:50       ` Shawn Guo
2013-04-18  9:04         ` Lars-Peter Clausen
2013-04-18 15:00           ` Shawn Guo
2013-04-18 15:04             ` Lars-Peter Clausen
2013-04-18 17:46               ` Lars-Peter Clausen
2013-04-18  2:44     ` Shawn Guo
2013-04-15 17:19 ` [PATCH 11/17] ASoC: imx: Setup dma data in DAI probe Lars-Peter Clausen
2013-04-15 17:19 ` [PATCH 12/17] ASoC: imx: Use generic dmaengine PCM Lars-Peter Clausen
2013-04-15 17:20 ` [PATCH 13/17] ASoC: omap: Setup dma data in DAI probe Lars-Peter Clausen
2013-04-15 17:20 ` [PATCH 14/17] ASoC: omap: Use generic dmaengine PCM Lars-Peter Clausen
2013-04-15 17:20 ` [PATCH 15/17] ASoC: ep93xx: Setup dma data in DAI probe Lars-Peter Clausen
2013-04-15 17:20 ` [PATCH 16/17] ASoC: ep93xx: Use generic dmaengine PCM Lars-Peter Clausen
     [not found]   ` <516C91E5.9080309@gmail.com>
2013-04-16  5:32     ` Lars-Peter Clausen
2013-04-15 17:20 ` [PATCH 17/17] ASoC: ux500: " Lars-Peter Clausen
2013-04-18 13:50   ` Lee Jones
2013-04-18 14:05   ` Mark Brown
2013-04-16 15:33 ` [PATCH 00/17] ASoC: Towards a generic dmaengine PCM driver Mark Brown
2013-04-17  8:14 ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1366046404-8759-8-git-send-email-lars@metafoo.de \
    --to=lars@metafoo.de \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=hsweeten@visionengravers.com \
    --cc=jarkko.nikula@bitmer.com \
    --cc=ldewangan@nvidia.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux@arm.linux.org.uk \
    --cc=mpa@pengutronix.de \
    --cc=ola.o.lilja@stericsson.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=rajeev-dlh.kumar@st.com \
    --cc=rmallon@gmail.com \
    --cc=s-guiriec@ti.com \
    --cc=shawn.guo@linaro.org \
    --cc=swarren@wwwdotorg.org \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox