From: Daniel Mack <zonque@gmail.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, clemens@ladisch.de, Daniel Mack <zonque@gmail.com>,
demian@auraliti.com, ray@auraliti.com, andreas@akdesigninc.com
Subject: [PATCH v3 2/5] ALSA: snd-usb: use ep->stride from urb callbacks
Date: Wed, 17 Apr 2013 00:01:37 +0800 [thread overview]
Message-ID: <1366128100-9778-3-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1366128100-9778-1-git-send-email-zonque@gmail.com>
For normal PCM transfer, this change has no effect, as the endpoint's
stride is always frame_bits/8. For DSD DOP streams, however, which is
added later, the hardware stride differs from the software stride, and
the endpoint has the correct information in these cases.
Signed-off-by: Daniel Mack <zonque@gmail.com>
---
sound/usb/pcm.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 815a37d..6f85202 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -1236,8 +1236,8 @@ static void prepare_playback_urb(struct snd_usb_substream *subs,
counts = snd_usb_endpoint_next_packet_size(ep);
/* set up descriptor */
- urb->iso_frame_desc[i].offset = frames * stride;
- urb->iso_frame_desc[i].length = counts * stride;
+ urb->iso_frame_desc[i].offset = frames * ep->stride;
+ urb->iso_frame_desc[i].length = counts * ep->stride;
frames += counts;
urb->number_of_packets++;
subs->transfer_done += counts;
@@ -1251,14 +1251,14 @@ static void prepare_playback_urb(struct snd_usb_substream *subs,
frames -= subs->transfer_done;
counts -= subs->transfer_done;
urb->iso_frame_desc[i].length =
- counts * stride;
+ counts * ep->stride;
subs->transfer_done = 0;
}
i++;
if (i < ctx->packets) {
/* add a transfer delimiter */
urb->iso_frame_desc[i].offset =
- frames * stride;
+ frames * ep->stride;
urb->iso_frame_desc[i].length = 0;
urb->number_of_packets++;
}
@@ -1269,7 +1269,7 @@ static void prepare_playback_urb(struct snd_usb_substream *subs,
!snd_usb_endpoint_implicit_feedback_sink(subs->data_endpoint)) /* finish at the period boundary */
break;
}
- bytes = frames * stride;
+ bytes = frames * ep->stride;
if (subs->hwptr_done + bytes > runtime->buffer_size * stride) {
/* err, the transferred area goes over buffer boundary. */
unsigned int bytes1 =
@@ -1310,8 +1310,8 @@ static void retire_playback_urb(struct snd_usb_substream *subs,
{
unsigned long flags;
struct snd_pcm_runtime *runtime = subs->pcm_substream->runtime;
- int stride = runtime->frame_bits >> 3;
- int processed = urb->transfer_buffer_length / stride;
+ struct snd_usb_endpoint *ep = subs->data_endpoint;
+ int processed = urb->transfer_buffer_length / ep->stride;
int est_delay;
/* ignore the delay accounting when procssed=0 is given, i.e.
--
1.7.10.4
next prev parent reply other threads:[~2013-04-16 16:01 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-16 16:01 [PATCH v3 0/5] ALSA: snd-usb: add support for DSD Daniel Mack
2013-04-16 16:01 ` [PATCH v3 1/5] ALSA: add DSD formats Daniel Mack
2013-04-16 16:01 ` Daniel Mack [this message]
2013-04-16 16:01 ` [PATCH v3 3/5] ALSA: snd-usb: add support for DSD DOP stream transport Daniel Mack
2013-04-16 16:01 ` [PATCH v3 4/5] ALSA: snd-usb: add support for bit-reversed byte formats Daniel Mack
2013-04-16 16:01 ` [PATCH v3 5/5] ALSA: snd-usb: add quirks handler for DSD streams Daniel Mack
2013-04-16 16:13 ` [PATCH v3 0/5] ALSA: snd-usb: add support for DSD Takashi Iwai
2013-04-17 10:59 ` Takashi Iwai
2013-04-17 11:03 ` Daniel Mack
2013-04-17 17:01 ` Jussi Laako
2013-04-17 17:04 ` Daniel Mack
2013-04-17 17:13 ` Jussi Laako
2013-04-18 8:05 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366128100-9778-3-git-send-email-zonque@gmail.com \
--to=zonque@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=andreas@akdesigninc.com \
--cc=clemens@ladisch.de \
--cc=demian@auraliti.com \
--cc=ray@auraliti.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox