From: Daniel Mack <zonque@gmail.com>
To: alsa-devel@alsa-project.org
Cc: broonie@kernel.org, Daniel Mack <zonque@gmail.com>
Subject: [PATCH 1/5] ASoC: codecs: tas5086: fix documentation
Date: Mon, 24 Jun 2013 16:25:28 +0200 [thread overview]
Message-ID: <1372083932-4318-1-git-send-email-zonque@gmail.com> (raw)
The property 'ti,charge-period' must be given in nanoseconds, not
microseconds.
Signed-off-by: Daniel Mack <zonque@gmail.com>
---
Documentation/devicetree/bindings/sound/ti,tas5086.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/ti,tas5086.txt b/Documentation/devicetree/bindings/sound/ti,tas5086.txt
index 8ea4f5b..e8310f1 100644
--- a/Documentation/devicetree/bindings/sound/ti,tas5086.txt
+++ b/Documentation/devicetree/bindings/sound/ti,tas5086.txt
@@ -11,7 +11,7 @@ Optional properties:
chip's !RESET pin. If specified, the driver will
assert a hardware reset at probe time.
- - ti,charge-period: This property should contain the time in microseconds
+ - ti,charge-period: This property should contain the time in nanoseconds
that closely matches the external single-ended
split-capacitor charge period. The hardware chip
waits for this period of time before starting the
--
1.8.1.4
next reply other threads:[~2013-06-24 14:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-24 14:25 Daniel Mack [this message]
2013-06-24 14:25 ` [PATCH 2/5] ASoC: codecs: tas5086: open-code I2C transfer routines Daniel Mack
2013-06-24 14:25 ` [PATCH 3/5] ASoC: codecs: tas5086: add more register defines Daniel Mack
2013-06-24 14:25 ` [PATCH 4/5] ASoC: codecs: tas5086: add DAPM mux controls Daniel Mack
2013-06-24 14:25 ` [PATCH 5/5] ASoC: codecs: tas5086: add support for pwm start mode config Daniel Mack
2013-06-24 16:05 ` [PATCH 1/5] ASoC: codecs: tas5086: fix documentation Mark Brown
2013-06-24 16:46 ` Daniel Mack
2013-06-25 9:26 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372083932-4318-1-git-send-email-zonque@gmail.com \
--to=zonque@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox