From: Mark Brown <broonie@kernel.org>
To: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org, linaro-kernel@lists.linaro.org,
Mark Brown <broonie@linaro.org>
Subject: [PATCH 2/2] ASoC: pcm3008: Manage DAC and ADC power with DAPM
Date: Thu, 15 Aug 2013 12:04:56 +0100 [thread overview]
Message-ID: <1376564696-5614-2-git-send-email-broonie@kernel.org> (raw)
In-Reply-To: <1376564696-5614-1-git-send-email-broonie@kernel.org>
From: Mark Brown <broonie@linaro.org>
Rather than leaving the DAC and ADC active whenever the system is running
manage their power with DAPM.
Signed-off-by: Mark Brown <broonie@linaro.org>
---
sound/soc/codecs/pcm3008.c | 72 +++++++++++++++++++++++++---------------------
1 file changed, 39 insertions(+), 33 deletions(-)
diff --git a/sound/soc/codecs/pcm3008.c b/sound/soc/codecs/pcm3008.c
index 19f5028..b6618c4 100644
--- a/sound/soc/codecs/pcm3008.c
+++ b/sound/soc/codecs/pcm3008.c
@@ -28,20 +28,53 @@
#include "pcm3008.h"
+static int pcm3008_dac_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol,
+ int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct pcm3008_setup_data *setup = codec->dev->platform_data;
+
+ gpio_set_value_cansleep(setup->pdda_pin,
+ SND_SOC_DAPM_EVENT_ON(event));
+
+ return 0;
+}
+
+static int pcm3008_adc_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol,
+ int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct pcm3008_setup_data *setup = codec->dev->platform_data;
+
+ gpio_set_value_cansleep(setup->pdad_pin,
+ SND_SOC_DAPM_EVENT_ON(event));
+
+ return 0;
+}
+
static const struct snd_soc_dapm_widget pcm3008_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("VINL"),
SND_SOC_DAPM_INPUT("VINR"),
+SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, pcm3008_dac_ev,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_ADC_E("ADC", NULL, SND_SOC_NOPM, 0, 0, pcm3008_adc_ev,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+
SND_SOC_DAPM_OUTPUT("VOUTL"),
SND_SOC_DAPM_OUTPUT("VOUTR"),
};
static const struct snd_soc_dapm_route pcm3008_dapm_routes[] = {
- { "PCM3008 Capture", NULL, "VINL" },
- { "PCM3008 Capture", NULL, "VINR" },
+ { "PCM3008 Capture", NULL, "ADC" },
+ { "ADC", NULL, "VINL" },
+ { "ADC", NULL, "VINR" },
- { "VOUTL", NULL, "PCM3008 Playback" },
- { "VOUTR", NULL, "PCM3008 Playback" },
+ { "DAC", NULL, "PCM3008 Playback" },
+ { "VOUTL", NULL, "DAC" },
+ { "VOUTR", NULL, "DAC" },
};
#define PCM3008_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
@@ -65,34 +98,7 @@ static struct snd_soc_dai_driver pcm3008_dai = {
},
};
-#ifdef CONFIG_PM
-static int pcm3008_soc_suspend(struct snd_soc_codec *codec)
-{
- struct pcm3008_setup_data *setup = codec->dev->platform_data;
-
- gpio_set_value_cansleep(setup->pdad_pin, 0);
- gpio_set_value_cansleep(setup->pdda_pin, 0);
-
- return 0;
-}
-
-static int pcm3008_soc_resume(struct snd_soc_codec *codec)
-{
- struct pcm3008_setup_data *setup = codec->dev->platform_data;
-
- gpio_set_value_cansleep(setup->pdad_pin, 1);
- gpio_set_value_cansleep(setup->pdda_pin, 1);
-
- return 0;
-}
-#else
-#define pcm3008_soc_suspend NULL
-#define pcm3008_soc_resume NULL
-#endif
-
static struct snd_soc_codec_driver soc_codec_dev_pcm3008 = {
- .suspend = pcm3008_soc_suspend,
- .resume = pcm3008_soc_resume,
.dapm_widgets = pcm3008_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(pcm3008_dapm_widgets),
.dapm_routes = pcm3008_dapm_routes,
@@ -128,13 +134,13 @@ static int pcm3008_codec_probe(struct platform_device *pdev)
/* Configure PDAD GPIO. */
ret = devm_gpio_request_one(&pdev->dev, setup->pdad_pin,
- GPIOF_OUT_INIT_HIGH, "codec_pdad");
+ GPIOF_OUT_INIT_LOW, "codec_pdad");
if (ret != 0)
return ret;
/* Configure PDDA GPIO. */
ret = devm_gpio_request_one(&pdev->dev, setup->pdda_pin,
- GPIOF_OUT_INIT_HIGH, "codec_pdda");
+ GPIOF_OUT_INIT_LOW, "codec_pdda");
if (ret != 0)
return ret;
--
1.8.4.rc2
prev parent reply other threads:[~2013-08-15 11:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-15 11:04 [PATCH 1/2] ASoC: pcm3008: Add DAPM support Mark Brown
2013-08-15 11:04 ` Mark Brown [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1376564696-5614-2-git-send-email-broonie@kernel.org \
--to=broonie@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linaro-kernel@lists.linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).