From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001838]: Unknown model for ALC880 again, First International Computer p4m-915gd1 no sound
Date: Thu, 16 Feb 2006 23:06:23 +0100 [thread overview]
Message-ID: <1378e6540dc4936670a20e8e28e5691c@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1838>
======================================================================
Reported By: graabein
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 1838
Category: PCI - hda-intel
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution: Fedora Core 4
Kernel Version: 2.6.15-1.1831_FC4smp
======================================================================
Date Submitted: 02-10-2006 23:27 CET
Last Modified: 02-16-2006 23:06 CET
======================================================================
Summary: Unknown model for ALC880 again, First International
Computer p4m-915gd1 no sound
Description:
I'm unable to get any sound on my FIC p4m-915gd1 motherboard's built-in
sound. There are no error messages and I can play content all I want, I
just don't get any sound.
The manufacturer's page lists the hardware as "Intel HDA, Azalia 8
Channel, Realtek ALC880":
http://www.fic.com.tw/product/motherboard/intel/p4m-915gd1.aspx
I've found other, similar reports here in the bug tracker (#1460, #1563,
#1589), including reports that this problem was resolved as of 1.0.11rc1.
Accordingly, I tried compiling alsa from cvs sources as of today, but this
made no difference. I still have no sound.
======================================================================
----------------------------------------------------------------------
er-ku - 02-16-06 18:36
----------------------------------------------------------------------
you may also try a "model=test" argument if position_fix fails. With this
argument, you get all the possible controls in the mixer. After finding
out, which control is actually influencing which I/O jack, you could
provide that info to alsa developers for inclusion into the driver.
----------------------------------------------------------------------
graabein - 02-16-06 23:06
----------------------------------------------------------------------
Marijn Schouten wrote:
> check out bug 1563 and apply the patch for 1.0.10-rc3
As the note in bug 1563 says, the patch is already in CVS. I checked my
copy and it is indeed in there. So that doesn't help.
> check out bug 1807 for 1.0.11-rc3 "Yes, position_fix=1 (or 3) fixes the
problem."
Neither position_fix=1 nor 3 made any difference on my system.
er-ku wrote:
> you may also try a "model=test" argument if position_fix fails
I must already have had all possible controls in the mixer, because this
parameter made no difference to the number controls I already had. All
controls are turned up to 75-90% and mute is of course turned off, but I
still have no sound.
In alsamixer, from left to right:
Headphone, PCM, Front, Front Mic, Surround, Center, LFE, Line, CD, Mic, PC
Speaker, Capture, Capture 1, Capture 2, Channel Mode, Input Source, Input
Source 1, Input Source 2
Issue History
Date Modified Username Field Change
======================================================================
02-10-06 23:27 graabein New Issue
02-10-06 23:27 graabein Distribution => Fedora Core 4
02-10-06 23:27 graabein Kernel Version => 2.6.15-1.1831_FC4smp
02-10-06 23:38 graabein Note Added: 0008010
02-15-06 23:46 Eugene Seppel Issue Monitored: Eugene Seppel
02-15-06 23:46 Eugene Seppel Note Added: 0008081
02-16-06 17:08 Marijn SchoutenNote Added: 0008098
02-16-06 17:10 Marijn SchoutenNote Edited: 0008098
02-16-06 18:36 er-ku Note Added: 0008101
02-16-06 23:06 graabein Note Added: 0008103
======================================================================
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
next reply other threads:[~2006-02-16 22:06 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-16 22:06 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-03-15 18:31 [ALSA - driver 0001838]: Unknown model for ALC880 again, First International Computer p4m-915gd1 no sound bugtrack
2006-03-15 17:53 bugtrack
2006-03-15 14:31 bugtrack
2006-03-05 23:03 bugtrack
2006-02-19 4:55 bugtrack
2006-02-19 4:47 bugtrack
2006-02-19 1:03 bugtrack
2006-02-17 15:31 bugtrack
2006-02-17 9:47 bugtrack
2006-02-16 17:36 bugtrack
2006-02-16 16:08 bugtrack
2006-02-15 22:46 bugtrack
2006-02-10 22:38 bugtrack
2006-02-10 22:27 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378e6540dc4936670a20e8e28e5691c@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox