From: Lars-Peter Clausen <lars@metafoo.de>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: Vinod Koul <vinod.koul@intel.com>,
alsa-devel@alsa-project.org, Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH v2 1/2] ASoC: dmaengine-pcm: Add support for querying DMA capabilities
Date: Tue, 8 Oct 2013 15:07:59 +0200 [thread overview]
Message-ID: <1381237680-32654-1-git-send-email-lars@metafoo.de> (raw)
Currently each platform making use the the generic dmaengine PCM driver still
needs to provide a custom snd_pcm_hardware struct which specifies the
capabilities of the DMA controller, e.g. the maximum period size that can be
supported. This patch adds code which uses the newly introduced
dma_get_slave_caps() API to query this information from the dmaengine driver.
The new code path will only be taken if the 'pcm_hardware' field of the
snd_dmaengine_pcm_config struct is NULL.
The patch also introduces a new 'fifo_size' field to the
snd_dmaengine_dai_dma_data struct which is used to initialize the
snd_pcm_hardware 'fifo_size' field and needs to be set by the DAI driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
Changes since v1:
* Use dma_get_max_seg_size() to get the maximum size of one period
* Assume that a DMA engine driver is able to support an infinite number of
periods
* Increase min_period_bytes from 16 to 256.
---
include/sound/dmaengine_pcm.h | 2 ++
sound/soc/soc-generic-dmaengine-pcm.c | 55 ++++++++++++++++++++++++++++-------
2 files changed, 47 insertions(+), 10 deletions(-)
diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h
index f11c35c..83b2c3e 100644
--- a/include/sound/dmaengine_pcm.h
+++ b/include/sound/dmaengine_pcm.h
@@ -61,6 +61,7 @@ struct dma_chan *snd_dmaengine_pcm_get_chan(struct snd_pcm_substream *substream)
* @slave_id: Slave requester id for the DMA channel.
* @filter_data: Custom DMA channel filter data, this will usually be used when
* requesting the DMA channel.
+ * @fifo_size: FIFO size of the DAI controller in bytes
*/
struct snd_dmaengine_dai_dma_data {
dma_addr_t addr;
@@ -68,6 +69,7 @@ struct snd_dmaengine_dai_dma_data {
u32 maxburst;
unsigned int slave_id;
void *filter_data;
+ unsigned int fifo_size;
};
void snd_dmaengine_pcm_set_config_from_dai_data(
diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
index e29ec3c..c39e19e 100644
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -36,6 +36,15 @@ static struct dmaengine_pcm *soc_platform_to_pcm(struct snd_soc_platform *p)
return container_of(p, struct dmaengine_pcm, platform);
}
+static struct device *dmaengine_dma_dev(struct dmaengine_pcm *pcm,
+ struct snd_pcm_substream *substream)
+{
+ if (!pcm->chan[substream->stream])
+ return NULL;
+
+ return pcm->chan[substream->stream]->device->dev;
+}
+
/**
* snd_dmaengine_pcm_prepare_slave_config() - Generic prepare_slave_config callback
* @substream: PCM substream
@@ -92,28 +101,54 @@ static int dmaengine_pcm_hw_params(struct snd_pcm_substream *substream,
return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
}
-static int dmaengine_pcm_open(struct snd_pcm_substream *substream)
+static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct dmaengine_pcm *pcm = soc_platform_to_pcm(rtd->platform);
+ struct device *dma_dev = dmaengine_dma_dev(pcm, substream);
struct dma_chan *chan = pcm->chan[substream->stream];
+ struct snd_dmaengine_dai_dma_data *dma_data;
+ struct dma_slave_caps dma_caps;
+ struct snd_pcm_hardware hw;
int ret;
- ret = snd_soc_set_runtime_hwparams(substream,
+ if (pcm->config->pcm_hardware)
+ return snd_soc_set_runtime_hwparams(substream,
pcm->config->pcm_hardware);
- if (ret)
- return ret;
- return snd_dmaengine_pcm_open(substream, chan);
+ dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+ memset(&hw, 0, sizeof(hw));
+ hw.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED;
+ hw.periods_min = 2;
+ hw.periods_max = UINT_MAX;
+ hw.period_bytes_min = 256;
+ hw.period_bytes_max = dma_get_max_seg_size(dma_dev);
+ hw.buffer_bytes_max = SIZE_MAX;
+ hw.fifo_size = dma_data->fifo_size;
+
+ ret = dma_get_slave_caps(chan, &dma_caps);
+ if (ret == 0) {
+ if (dma_caps.cmd_pause)
+ hw.info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
+ }
+
+ return snd_soc_set_runtime_hwparams(substream, &hw);
}
-static struct device *dmaengine_dma_dev(struct dmaengine_pcm *pcm,
- struct snd_pcm_substream *substream)
+static int dmaengine_pcm_open(struct snd_pcm_substream *substream)
{
- if (!pcm->chan[substream->stream])
- return NULL;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct dmaengine_pcm *pcm = soc_platform_to_pcm(rtd->platform);
+ struct dma_chan *chan = pcm->chan[substream->stream];
+ int ret;
- return pcm->chan[substream->stream]->device->dev;
+ ret = dmaengine_pcm_set_runtime_hwparams(substream);
+ if (ret)
+ return ret;
+
+ return snd_dmaengine_pcm_open(substream, chan);
}
static void dmaengine_pcm_free(struct snd_pcm *pcm)
--
1.8.0
next reply other threads:[~2013-10-08 13:06 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-08 13:07 Lars-Peter Clausen [this message]
2013-10-08 13:08 ` [PATCH v2 2/2] ASoC: dmaengine-pcm: Provide default config Lars-Peter Clausen
2013-10-08 15:06 ` [PATCH v2 1/2] ASoC: dmaengine-pcm: Add support for querying DMA capabilities Vinod Koul
2013-10-08 16:13 ` Lars-Peter Clausen
2013-10-08 15:30 ` Vinod Koul
2013-10-08 16:40 ` Lars-Peter Clausen
2013-10-08 16:46 ` Mark Brown
2013-10-08 15:49 ` Mark Brown
2013-10-08 14:59 ` Vinod Koul
2013-10-16 18:10 ` Mark Brown
2013-10-16 18:28 ` Lars-Peter Clausen
2013-11-13 9:09 ` Vinod Koul
2013-10-19 20:27 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381237680-32654-1-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).