From: Anssi Hannula <anssi.hannula@iki.fi>
To: Takashi Iwai <tiwai@suse.de>
Cc: "Olivier Langlois" <olivier@trillion01.com>,
alsa-devel@alsa-project.org,
"Peter Frühberger" <fritsch@xbmc.org>
Subject: [PATCH 5/5] ALSA: hda - hdmi: Disable ramp-up/down for non-PCM on AMD codecs
Date: Thu, 24 Oct 2013 21:10:38 +0300 [thread overview]
Message-ID: <1382638238-25055-6-git-send-email-anssi.hannula@iki.fi> (raw)
In-Reply-To: <1382638238-25055-1-git-send-email-anssi.hannula@iki.fi>
Recent AMD HDMI codecs (revision ID 3 and later, 0x100300 as reported by
procfs codec#0) have a configurable ramp-up/down functionality.
The documentation ( http://www.x.org/docs/AMD/AMD_HDA_verbs_v2.pdf )
specifies that 180 ("180/256 =~ 0.7") is recommended for PCM and 0 for
non-PCM.
Apply the recommended values according to provided S/PDIF AES0 settings
since ramp-up/down does not make sense for non-PCM.
v2: adapted to hdmi_ops infrastructure
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Tested-by: Olivier Langlois <olivier@trillion01.com> # v1
---
sound/pci/hda/patch_hdmi.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 2c45591..74bd2e63ce 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2819,6 +2819,10 @@ static int patch_nvhdmi_8ch_7x(struct hda_codec *codec)
#define ATI_VERB_GET_MULTICHANNEL_7 0xf88
#define ATI_VERB_GET_MULTICHANNEL_MODE 0xf89
+/* AMD specific HDA cvt verbs */
+#define ATI_VERB_SET_RAMP_RATE 0x770
+#define ATI_VERB_GET_RAMP_RATE 0xf70
+
#define ATI_OUT_ENABLE 0x1
#define ATI_MULTICHANNEL_MODE_PAIRED 0
@@ -3050,6 +3054,23 @@ static int atihdmi_pin_hbr_setup(struct hda_codec *codec, hda_nid_t pin_nid,
return 0;
}
+static int atihdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,
+ hda_nid_t pin_nid, u32 stream_tag, int format)
+{
+
+ if (is_amdhdmi_rev3_or_later(codec)) {
+ int ramp_rate = 180; /* default as per AMD spec */
+ /* disable ramp-up/down for non-pcm as per AMD spec */
+ if (format & AC_FMT_TYPE_NON_PCM)
+ ramp_rate = 0;
+
+ snd_hda_codec_write(codec, cvt_nid, 0, ATI_VERB_SET_RAMP_RATE, ramp_rate);
+ }
+
+ return hdmi_setup_stream(codec, cvt_nid, pin_nid, stream_tag, format);
+}
+
+
static int atihdmi_init(struct hda_codec *codec)
{
struct hdmi_spec *spec = codec->spec;
@@ -3096,6 +3117,7 @@ static int patch_atihdmi(struct hda_codec *codec)
spec->ops.pin_set_slot_channel = atihdmi_pin_set_slot_channel;
spec->ops.pin_setup_infoframe = atihdmi_pin_setup_infoframe;
spec->ops.pin_hbr_setup = atihdmi_pin_hbr_setup;
+ spec->ops.setup_stream = atihdmi_setup_stream;
if (!has_amd_full_remap_support(codec)) {
/* override to ATI/AMD-specific versions with pairwise mapping */
--
1.8.1.5
next prev parent reply other threads:[~2013-10-24 18:10 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-24 18:10 [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Anssi Hannula
2013-10-24 18:10 ` [PATCH 1/5] ALSA: hda - hdmi: Allow HDA patches to customize more operations Anssi Hannula
2013-10-24 18:10 ` [PATCH 2/5] ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support Anssi Hannula
2013-10-24 18:10 ` [PATCH 3/5] ALSA: hda - hdmi: Add ELD emulation for ATI/AMD codecs Anssi Hannula
2013-10-24 18:10 ` [PATCH 4/5] ALSA: hda - hdmi: Add HBR bitstreaming support for ATI/AMD HDMI codecs Anssi Hannula
2013-10-24 18:10 ` Anssi Hannula [this message]
2013-10-24 19:00 ` [PATCH 5/5] ALSA: hda - hdmi: Disable ramp-up/down for non-PCM on AMD codecs Anssi Hannula
2013-10-24 18:26 ` [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Anssi Hannula
2013-11-08 5:08 ` Olivier Langlois
2013-11-08 10:27 ` Anssi Hannula
2013-11-08 18:17 ` Olivier Langlois
2013-11-08 21:28 ` Olivier Langlois
2013-11-08 22:03 ` Anssi Hannula
2013-11-10 5:42 ` Olivier Langlois
2013-11-10 6:01 ` Anssi Hannula
2013-11-10 7:25 ` speaker-test chmap bugs (was: [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support) Anssi Hannula
2013-11-10 18:29 ` [PATCH 1/3] speaker-test: Fix chmapped channel selection without specified chmap Anssi Hannula
2013-11-10 18:29 ` [PATCH 2/3] speaker-test: Always show chmap channel names if available Anssi Hannula
2013-11-10 18:29 ` [PATCH 3/3] speaker-test: Show out-of-chmap channels as Unknown Anssi Hannula
2013-11-11 15:56 ` [PATCH 1/3] speaker-test: Fix chmapped channel selection without specified chmap Takashi Iwai
2013-11-11 20:23 ` Anssi Hannula
2013-11-11 22:04 ` [PATCH 1/3 v2] " Anssi Hannula
2013-11-12 8:11 ` Takashi Iwai
2013-11-12 12:34 ` Anssi Hannula
2013-11-12 13:08 ` Takashi Iwai
2013-11-12 6:35 ` [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Olivier Langlois
2013-11-14 0:04 ` Anssi Hannula
2013-11-09 8:35 ` Takashi Iwai
2013-10-24 23:04 ` Takashi Iwai
2013-10-25 16:54 ` Andre Heider
2013-10-25 17:13 ` Takashi Iwai
2013-10-25 17:23 ` Anssi Hannula
2013-10-25 18:25 ` Andre Heider
2013-10-28 17:52 ` Andre Heider
2013-10-28 18:12 ` Anssi Hannula
2013-10-28 18:17 ` Andre Heider
2013-10-28 18:25 ` Anssi Hannula
2013-10-28 18:35 ` Andre Heider
2013-10-28 20:35 ` Anssi Hannula
2013-10-28 22:00 ` Andre Heider
2013-10-28 22:42 ` Anssi Hannula
2013-10-28 23:15 ` Andre Heider
2013-10-29 19:52 ` LANGLOIS Olivier PIS -EXT
2013-10-29 20:30 ` Anssi Hannula
2013-10-28 23:19 ` [PATCH] drm/radeon/audio: fix missing multichannel PCM SAD in some cases Anssi Hannula
2013-10-31 23:38 ` Rafał Miłecki
2013-10-31 23:46 ` Rafał Miłecki
2013-10-31 23:52 ` Anssi Hannula
2013-11-02 1:01 ` Rafał Miłecki
2013-11-02 1:08 ` Anssi Hannula
2013-11-02 1:15 ` Rafał Miłecki
2013-11-02 1:03 ` Rafał Miłecki
2013-11-02 15:32 ` [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Anssi Hannula
2013-11-23 1:05 ` James Le Cuirot
2013-11-23 1:29 ` Anssi Hannula
2013-11-23 15:40 ` James Le Cuirot
2013-11-23 15:45 ` Anssi Hannula
2013-11-24 14:57 ` James Le Cuirot
2013-11-25 13:20 ` Anssi Hannula
2013-11-25 14:32 ` James Le Cuirot
2013-11-25 14:56 ` Anssi Hannula
2014-05-13 12:01 ` James Le Cuirot
2014-05-13 12:27 ` Anssi Hannula
2014-05-13 16:16 ` James Le Cuirot
2014-05-13 21:10 ` James Le Cuirot
2014-05-13 21:50 ` Anssi Hannula
2014-05-14 13:04 ` Deucher, Alexander
2014-05-14 13:19 ` James Le Cuirot
2013-11-25 15:07 ` Raymond Yau
2013-11-25 15:32 ` James Le Cuirot
2013-11-25 19:35 ` Anssi Hannula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382638238-25055-6-git-send-email-anssi.hannula@iki.fi \
--to=anssi.hannula@iki.fi \
--cc=alsa-devel@alsa-project.org \
--cc=fritsch@xbmc.org \
--cc=olivier@trillion01.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).