* [RFC PATCH] hda_intel: ratelimit "spurious response" message @ 2013-11-07 19:55 Joe Perches 2013-11-07 20:23 ` Takashi Iwai 0 siblings, 1 reply; 11+ messages in thread From: Joe Perches @ 2013-11-07 19:55 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, LKML dmesg here has a 100+ consecutive lines of: [ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 [ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 [ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 ... Ratelimit the message to reduce the dmesg log noise. Coalesce the format while at it. Signed-off-by: Joe Perches <joe@perches.com> --- sound/pci/hda/hda_intel.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 6e61a01..6e444ca 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -906,12 +906,12 @@ static void azx_update_rirb(struct azx *chip) chip->rirb.res[addr] = res; smp_wmb(); chip->rirb.cmds[addr]--; - } else - snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, " - "last cmd=%#08x\n", + } else if (printk_ratelimit()) { + snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, last cmd=%#08x\n", pci_name(chip->pci), res, res_ex, chip->last_cmd[addr]); + } } } ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message 2013-11-07 19:55 [RFC PATCH] hda_intel: ratelimit "spurious response" message Joe Perches @ 2013-11-07 20:23 ` Takashi Iwai 2013-11-07 20:28 ` Joe Perches 0 siblings, 1 reply; 11+ messages in thread From: Takashi Iwai @ 2013-11-07 20:23 UTC (permalink / raw) To: Joe Perches; +Cc: alsa-devel, LKML At Thu, 07 Nov 2013 11:55:15 -0800, Joe Perches wrote: > > dmesg here has a 100+ consecutive lines of: > > [ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > [ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > [ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > ... > > Ratelimit the message to reduce the dmesg log noise. > > Coalesce the format while at it. > > Signed-off-by: Joe Perches <joe@perches.com> Thanks, applied. BTW, which hardware shows this problem? I'm interested rather in that... Takashi > --- > sound/pci/hda/hda_intel.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c > index 6e61a01..6e444ca 100644 > --- a/sound/pci/hda/hda_intel.c > +++ b/sound/pci/hda/hda_intel.c > @@ -906,12 +906,12 @@ static void azx_update_rirb(struct azx *chip) > chip->rirb.res[addr] = res; > smp_wmb(); > chip->rirb.cmds[addr]--; > - } else > - snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, " > - "last cmd=%#08x\n", > + } else if (printk_ratelimit()) { > + snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, last cmd=%#08x\n", > pci_name(chip->pci), > res, res_ex, > chip->last_cmd[addr]); > + } > } > } > > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message 2013-11-07 20:23 ` Takashi Iwai @ 2013-11-07 20:28 ` Joe Perches 2013-11-08 10:59 ` Takashi Iwai 0 siblings, 1 reply; 11+ messages in thread From: Joe Perches @ 2013-11-07 20:28 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, LKML On Thu, 2013-11-07 at 21:23 +0100, Takashi Iwai wrote: > At Thu, 07 Nov 2013 11:55:15 -0800, > Joe Perches wrote: > > > > dmesg here has a 100+ consecutive lines of: > > > > [ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > > [ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > > [ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > > ... > > > > Ratelimit the message to reduce the dmesg log noise. > > > > Coalesce the format while at it. > > > > Signed-off-by: Joe Perches <joe@perches.com> > > Thanks, applied. > > BTW, which hardware shows this problem? > I'm interested rather in that... It's a little Acer netbook AO725 # lspci -v -v -s0:14.2 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: Acer Incorporated [ALI] Device 0740 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at f0240000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 41b3 Kernel driver in use: snd_hda_intel ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message 2013-11-07 20:28 ` Joe Perches @ 2013-11-08 10:59 ` Takashi Iwai 2013-11-09 4:41 ` Joe Perches 0 siblings, 1 reply; 11+ messages in thread From: Takashi Iwai @ 2013-11-08 10:59 UTC (permalink / raw) To: Joe Perches; +Cc: alsa-devel, LKML At Thu, 07 Nov 2013 12:28:18 -0800, Joe Perches wrote: > > On Thu, 2013-11-07 at 21:23 +0100, Takashi Iwai wrote: > > At Thu, 07 Nov 2013 11:55:15 -0800, > > Joe Perches wrote: > > > > > > dmesg here has a 100+ consecutive lines of: > > > > > > [ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > > > [ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > > > [ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > > > ... > > > > > > Ratelimit the message to reduce the dmesg log noise. > > > > > > Coalesce the format while at it. > > > > > > Signed-off-by: Joe Perches <joe@perches.com> > > > > Thanks, applied. > > > > BTW, which hardware shows this problem? > > I'm interested rather in that... > > It's a little Acer netbook AO725 > > # lspci -v -v -s0:14.2 > 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) > Subsystem: Acer Incorporated [ALI] Device 0740 Could you give alsa-info.sh output (maybe better to get it after applying your patch)? It'll show more comprehensive information. thanks, Takashi ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message 2013-11-08 10:59 ` Takashi Iwai @ 2013-11-09 4:41 ` Joe Perches 2013-11-14 17:28 ` Takashi Iwai 0 siblings, 1 reply; 11+ messages in thread From: Joe Perches @ 2013-11-09 4:41 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel (dropping lkml from cc's) On Fri, 2013-11-08 at 11:59 +0100, Takashi Iwai wrote: > At Thu, 07 Nov 2013 12:28:18 -0800, > Joe Perches wrote: > > On Thu, 2013-11-07 at 21:23 +0100, Takashi Iwai wrote: > > > At Thu, 07 Nov 2013 11:55:15 -0800, > > > Joe Perches wrote: > > > > dmesg here has a 100+ consecutive lines of: > > > > [ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > > > > [ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > > > > [ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > > > > ... > > > > Ratelimit the message to reduce the dmesg log noise. > > > > Coalesce the format while at it. > > > Thanks, applied. > > > BTW, which hardware shows this problem? > > > I'm interested rather in that... > > It's a little Acer netbook AO725 > > # lspci -v -v -s0:14.2 > > 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) > > Subsystem: Acer Incorporated [ALI] Device 0740 > Could you give alsa-info.sh output (maybe better to get it after > applying your patch)? It'll show more comprehensive information. upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.62 !!################################ !!Script ran on: Sat Nov 9 04:36:16 UTC 2013 !!Linux Distribution !!------------------ Ubuntu 13.10 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 13.10" NAME="Ubuntu" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 13.10" HOME_URL="http://www.ubuntu.com/" SUPPORT_URL="http://help.ubuntu.com/" BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/" !!DMI Information !!--------------- Manufacturer: Acer Product Name: AO725 Product Version: V2.12 Firmware Version: V2.12 !!Kernel Information !!------------------ Kernel release: 3.12.0 Operating System: GNU/Linux Architecture: i686 Processor: athlon SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k3.12.0 Library version: 1.0.27.2 Utilities version: 1.0.27.1 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!----------------------------- 0 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xf0244000 irq 45 !!PCI Soundcards installed in the system !!-------------------------------------- 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 00:01.1 0403: 1002:1314 Subsystem: 1025:0740 -- 00:14.2 0403: 1022:780d (rev 01) Subsystem: 1025:0740 !!Modprobe options (Sound related) !!-------------------------------- snd_atiixp_modem: index=-2 snd_intel8x0m: index=-2 snd_via82xx_modem: index=-2 snd_usb_audio: index=-2 snd_usb_caiaq: index=-2 snd_usb_ua101: index=-2 snd_usb_us122l: index=-2 snd_usb_usx2y: index=-2 snd_cmipci: mpu_port=0x330 fm_port=0x388 snd_pcsp: index=-2 snd_usb_audio: index=-2 !!Loaded sound module options !!--------------------------- !!Module: snd_hda_intel align_buffer_size : -1 bdl_pos_adj : 32,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 power_save : 1 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N snoop : Y !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: ATI ID aa01 Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x1002aa01 Subsystem Id: 0x00aa0100 Revision Id: 0x100200 No Modem Function Group found Default PCM: rates [0x70]: 32000 44100 48000 bits [0x2]: 16 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D3 Power: setting=D0, actual=D0 GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Device: name="ID aa01 Digital", type="HDMI", device=3 Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 IEC Coding Type: 0x0 Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital Control: name="HDMI Jack", index=0, device=0 Pincap 0x00000094: OUT Detect HDMI Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=01, enabled=1 Connection: 1 0x02 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw----+ 1 root audio 116, 4 Nov 8 20:34 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 6 Nov 8 20:36 /dev/snd/controlC1 crw-rw----+ 1 root audio 116, 3 Nov 8 20:34 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 5 Nov 8 20:36 /dev/snd/hwC1D0 crw-rw----+ 1 root audio 116, 2 Nov 8 20:35 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 1 Nov 8 20:34 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Nov 8 20:34 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Nov 8 20:36 . drwxr-xr-x 3 root root 200 Nov 8 20:36 .. lrwxrwxrwx 1 root root 12 Nov 8 20:34 pci-0000:00:01.1 -> ../controlC0 lrwxrwxrwx 1 root root 12 Nov 8 20:36 pci-0000:00:14.2 -> ../controlC1 !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) pcm.pulse { type pulse } ctl.pulse { type pulse } pcm.!default { type pulse } ctl.!default { type pulse } !!Aplay/Arecord output !!-------------------- APLAY **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 3: ID aa01 Digital [ID aa01 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** !!Amixer output !!------------- !!-------Mixer controls for card 0 [Generic] Card hw:0 'Generic'/'HD-Audio Generic at 0xf0244000 irq 45' Mixer name : 'ATI ID aa01' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 6 Simple ctrls : 1 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] !!-------Mixer controls for card 1 ] Card hw:1 'Generic_1'/'HD-Audio Generic at 0xf0240000 irq 46' Mixer name : 'Realtek ALC271X' Components : 'HDA:10ec0269,10250740,00100100' Controls : 21 Simple ctrls : 10 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 87 Mono: Playback 0 [0%] [-65.25dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: Front Left: Playback 87 [100%] [0.00dB] [on] Front Right: Playback 87 [100%] [0.00dB] [on] Simple mixer control 'Speaker',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: Front Left: Playback 0 [0%] [-65.25dB] [on] Front Right: Playback 0 [0%] [-65.25dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 0 [0%] [-51.00dB] Front Right: Playback 0 [0%] [-51.00dB] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 127 Front Left: 127 [100%] [0.00dB] Front Right: 127 [100%] [0.00dB] Simple mixer control 'Beep',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 127 Front Left: Capture 127 [100%] [0.00dB] [on] Front Right: Capture 127 [100%] [0.00dB] [on] Simple mixer control 'Auto-Mute Mode',0 Capabilities: enum Items: 'Disabled' 'Enabled' Item0: 'Enabled' Simple mixer control 'Internal Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Internal Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 127 Front Left: 127 [100%] [0.00dB] Front Right: 127 [100%] [0.00dB] !!Alsactl output !!-------------- --startcollapse-- state.Generic { control.1 { iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.2 { iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.3 { iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.4 { iface MIXER name 'IEC958 Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.5 { iface CARD name 'HDMI Jack' value false comment { access read type BOOLEAN count 1 } } control.6 { iface PCM device 3 name 'Playback Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } } state.Generic_1 { control.1 { iface MIXER name 'Headphone Playback Volume' value.0 87 value.1 87 comment { access 'read write' type INTEGER count 2 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.2 { iface MIXER name 'Headphone Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.3 { iface MIXER name 'Speaker Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 -6525 dbvalue.1 -6525 } } control.4 { iface MIXER name 'Speaker Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.5 { iface MIXER name 'Internal Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.6 { iface MIXER name 'Internal Mic Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.7 { iface MIXER name 'Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.8 { iface MIXER name 'Mic Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.9 { iface MIXER name 'Auto-Mute Mode' value Enabled comment { access 'read write' type ENUMERATED count 1 item.0 Disabled item.1 Enabled } } control.10 { iface MIXER name 'Capture Volume' value.0 127 value.1 127 comment { access 'read write' type INTEGER count 2 range '0 - 127' dbmin -9999999 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.11 { iface MIXER name 'Capture Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.12 { iface MIXER name 'Internal Mic Boost Volume' value.0 127 value.1 127 comment { access 'read write' type INTEGER count 2 range '0 - 127' dbmin -9999999 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.13 { iface MIXER name 'Mic Boost Volume' value.0 127 value.1 127 comment { access 'read write' type INTEGER count 2 range '0 - 127' dbmin -9999999 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.14 { iface MIXER name 'Master Playback Volume' value 0 comment { access 'read write' type INTEGER count 1 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 -6525 } } control.15 { iface MIXER name 'Master Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.16 { iface CARD name 'Internal Mic Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.17 { iface CARD name 'Mic Jack' value true comment { access read type BOOLEAN count 1 } } control.18 { iface CARD name 'Headphone Jack' value true comment { access read type BOOLEAN count 1 } } control.19 { iface CARD name 'Speaker Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.20 { iface MIXER name 'Beep Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.21 { iface MIXER name 'Beep Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.22 { iface MIXER name 'PCM Playback Volume' value.0 0 value.1 0 comment { access 'read write user' type INTEGER count 2 range '0 - 255' tlv '0000000100000008ffffec1400000014' dbmin -5100 dbmax 0 dbvalue.0 -5100 dbvalue.1 -5100 } } } --endcollapse-- !!All Loaded Modules !!------------------ Module arc4 brcmsmac cordic brcmutil b43 mac80211 cfg80211 joydev acer_wmi sparse_keymap ssb kvm uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core microcode videodev psmouse serio_raw snd_hda_codec_realtek parport_pc ppdev snd_hda_intel k10temp snd_hda_codec i2c_piix4 snd_hwdep bnep rfcomm bluetooth snd_pcm wmi snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi video snd_seq snd_seq_device snd_timer snd binfmt_misc mac_hid bcma soundcore lp parport ahci libahci ohci_pci r8169 mii !!Sysfs Files !!----------- /sys/class/sound/hwC0D0/init_pin_configs: 0x03 0x18560010 /sys/class/sound/hwC0D0/driver_pin_configs: /sys/class/sound/hwC0D0/user_pin_configs: /sys/class/sound/hwC0D0/init_verbs: /sys/class/sound/hwC0D0/hints: /sys/class/sound/hwC1D0/init_pin_configs: 0x12 0x411111f0 0x14 0x90170110 0x17 0x411111f0 0x18 0x411111f0 0x19 0x411111f0 0x1a 0x411111f0 0x1b 0x90a70920 0x1d 0x4017992d 0x1e 0x411111f0 0x21 0x0321401f /sys/class/sound/hwC1D0/driver_pin_configs: 0x14 0x99130110 0x19 0x01a19c20 0x1b 0x99a7012f 0x21 0x0121401f /sys/class/sound/hwC1D0/user_pin_configs: /sys/class/sound/hwC1D0/init_verbs: /sys/class/sound/hwC1D0/hints: !!ALSA/HDA dmesg !!-------------- [ 12.904619] Request for unknown module key 'Magrathea: Glacier signing key: 67fb854805331643285fac717c3eca13bcd27a11' err -11 [ 12.934419] hda-intel 0000:00:01.1: Using LPIB position fix [ 12.934926] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X [ 12.939349] ppdev: user-space parallel port driver [ 12.953651] Request for unknown module key 'Magrathea: Glacier signing key: 67fb854805331643285fac717c3eca13bcd27a11' err -11 [ 12.980331] hda-intel 0000:00:01.1: Enable sync_write for stable communication [ 13.023285] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line -- [ 13.023319] inputs: [ 13.024262] input: HD-Audio Generic HDMI as /devices/pci0000:00/0000:00:01.1/sound/card0/input10 [ 13.047906] hda-intel 0000:00:14.2: Using LPIB position fix [ 13.113364] snd_hda_intel 0000:00:14.2: irq 46 for MSI/MSI-X [ 13.143431] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 13.161091] init: avahi-cups-reload main process (467) terminated with status 1 -- [ 19.376633] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243 [ 19.920196] hda_codec: rates == 0 (nid=0x2, val=0x0, ovrd=1) [ 19.920212] hda_codec: cannot attach PCM stream 0 for codec #0 [ 21.201741] type=1400 audit(1383971659.219:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1158 comm="apparmor_parser" -- [ 22.841535] type=1400 audit(1383971660.859:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1203 comm="apparmor_parser" [ 22.940626] hda-codec: out of range cmd 0:20:400:ffffffff [ 22.953083] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) -- [ 24.968914] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready [ 25.961020] hda-codec: out of range cmd 0:20:400:ffffffff [ 26.014218] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) -- [ 28.872890] type=1400 audit(1383971666.887:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-ofono" pid=1209 comm="apparmor_parser" [ 28.977442] hda-codec: out of range cmd 0:20:400:ffffffff [ 30.839285] type=1400 audit(1383971668.855:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1355 comm="apparmor_parser" -- [ 31.674152] type=1400 audit(1383971669.691:24): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1361 comm="apparmor_parser" [ 31.997829] hda-codec: out of range cmd 0:20:400:ffffffff [ 32.480075] type=1400 audit(1383971670.495:25): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1363 comm="apparmor_parser" -- [ 57.577932] init: plymouth-stop pre-start process (2080) terminated with status 1 [ 139.549955] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input19 [ 139.550275] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input18 ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message 2013-11-09 4:41 ` Joe Perches @ 2013-11-14 17:28 ` Takashi Iwai 2013-11-14 17:52 ` Joe Perches 0 siblings, 1 reply; 11+ messages in thread From: Takashi Iwai @ 2013-11-14 17:28 UTC (permalink / raw) To: Joe Perches; +Cc: alsa-devel At Fri, 08 Nov 2013 20:41:34 -0800, Joe Perches wrote: > > (dropping lkml from cc's) > > On Fri, 2013-11-08 at 11:59 +0100, Takashi Iwai wrote: > > At Thu, 07 Nov 2013 12:28:18 -0800, > > Joe Perches wrote: > > > On Thu, 2013-11-07 at 21:23 +0100, Takashi Iwai wrote: > > > > At Thu, 07 Nov 2013 11:55:15 -0800, > > > > Joe Perches wrote: > > > > > dmesg here has a 100+ consecutive lines of: > > > > > [ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > > > > > [ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > > > > > [ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500 > > > > > ... > > > > > Ratelimit the message to reduce the dmesg log noise. > > > > > Coalesce the format while at it. > > > > Thanks, applied. > > > > BTW, which hardware shows this problem? > > > > I'm interested rather in that... > > > It's a little Acer netbook AO725 > > > # lspci -v -v -s0:14.2 > > > 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) > > > Subsystem: Acer Incorporated [ALI] Device 0740 > > Could you give alsa-info.sh output (maybe better to get it after > > applying your patch)? It'll show more comprehensive information. > > upload=true&script=true&cardinfo= > !!################################ > !!ALSA Information Script v 0.4.62 > !!################################ > > !!Script ran on: Sat Nov 9 04:36:16 UTC 2013 > > > !!Linux Distribution > !!------------------ > > Ubuntu 13.10 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 13.10" NAME="Ubuntu" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 13.10" HOME_URL="http://www.ubuntu.com/" SUPPORT_URL="http://help.ubuntu.com/" BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/" > > > !!DMI Information > !!--------------- > > Manufacturer: Acer > Product Name: AO725 > Product Version: V2.12 > Firmware Version: V2.12 > > > !!Kernel Information > !!------------------ > > Kernel release: 3.12.0 > Operating System: GNU/Linux > Architecture: i686 > Processor: athlon > SMP Enabled: Yes > > > !!ALSA Version > !!------------ > > Driver version: k3.12.0 > Library version: 1.0.27.2 > Utilities version: 1.0.27.1 > > > !!Loaded ALSA modules > !!------------------- > > snd_hda_intel > > > !!Sound Servers on this system > !!---------------------------- > > Pulseaudio: > Installed - Yes (/usr/bin/pulseaudio) > Running - Yes > > > !!Soundcards recognised by ALSA > !!----------------------------- > > 0 [Generic ]: HDA-Intel - HD-Audio Generic > HD-Audio Generic at 0xf0244000 irq 45 > > > !!PCI Soundcards installed in the system > !!-------------------------------------- > > 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio > 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) > > > !!Advanced information - PCI Vendor/Device/Subsystem ID's > !!------------------------------------------------------- > > 00:01.1 0403: 1002:1314 > Subsystem: 1025:0740 > -- > 00:14.2 0403: 1022:780d (rev 01) > Subsystem: 1025:0740 > > > !!Modprobe options (Sound related) > !!-------------------------------- > > snd_atiixp_modem: index=-2 > snd_intel8x0m: index=-2 > snd_via82xx_modem: index=-2 > snd_usb_audio: index=-2 > snd_usb_caiaq: index=-2 > snd_usb_ua101: index=-2 > snd_usb_us122l: index=-2 > snd_usb_usx2y: index=-2 > snd_cmipci: mpu_port=0x330 fm_port=0x388 > snd_pcsp: index=-2 > snd_usb_audio: index=-2 > > > !!Loaded sound module options > !!--------------------------- > > !!Module: snd_hda_intel > align_buffer_size : -1 > bdl_pos_adj : 32,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 > beep_mode : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N > enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y > enable_msi : -1 > id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) > index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 > jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 > model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) > patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) > position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 > power_save : 1 > power_save_controller : Y > probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 > probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 > single_cmd : N > snoop : Y > > > !!HDA-Intel Codec information > !!--------------------------- > --startcollapse-- > > Codec: ATI ID aa01 You didn't enable CONFIG_SND_HDA_CODEC_HDMI, right? Build with it, at least. > Address: 0 > AFG Function Id: 0x1 (unsol 0) > Vendor Id: 0x1002aa01 > Subsystem Id: 0x00aa0100 > Revision Id: 0x100200 > No Modem Function Group found > Default PCM: > rates [0x70]: 32000 44100 48000 > bits [0x2]: 16 > formats [0x1]: PCM > Default Amp-In caps: N/A > Default Amp-Out caps: N/A > State of AFG node 0x01: > Power states: D0 D3 > Power: setting=D0, actual=D0 > GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 > Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital > Control: name="IEC958 Playback Con Mask", index=0, device=0 > Control: name="IEC958 Playback Pro Mask", index=0, device=0 > Control: name="IEC958 Playback Default", index=0, device=0 > Control: name="IEC958 Playback Switch", index=0, device=0 > Device: name="ID aa01 Digital", type="HDMI", device=3 > Converter: stream=0, channel=0 > Digital: Enabled > Digital category: 0x0 > IEC Coding Type: 0x0 > Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital > Control: name="HDMI Jack", index=0, device=0 > Pincap 0x00000094: OUT Detect HDMI > Pin Default 0x18560010: [Jack] Digital Out at Int HDMI > Conn = Digital, Color = Unknown > DefAssociation = 0x1, Sequence = 0x0 > Pin-ctls: 0x40: OUT > Unsolicited: tag=01, enabled=1 > Connection: 1 > 0x02 > --endcollapse-- Hrm, the codec proc for the analog audio isn't seen here. Maybe the codec communication was already screwed up at this point. Can you have a good output by any chance (showing the right contents of /proc/asound/card1/codec#*)? Takashi ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message 2013-11-14 17:28 ` Takashi Iwai @ 2013-11-14 17:52 ` Joe Perches 2013-11-15 6:34 ` Takashi Iwai 2013-11-15 6:56 ` Takashi Iwai 0 siblings, 2 replies; 11+ messages in thread From: Joe Perches @ 2013-11-14 17:52 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel On Thu, 2013-11-14 at 18:28 +0100, Takashi Iwai wrote: > At Fri, 08 Nov 2013 20:41:34 -0800, > Joe Perches wrote: [] > > !!HDA-Intel Codec information > > !!--------------------------- > > --startcollapse-- > > > > Codec: ATI ID aa01 > > You didn't enable CONFIG_SND_HDA_CODEC_HDMI, right? No, it's enabled. > Build with it, at least. $ grep CONFIG_SND_HDA_CODEC_HDMI /boot/config-3.12.0 CONFIG_SND_HDA_CODEC_HDMI=y > Hrm, the codec proc for the analog audio isn't seen here. > Maybe the codec communication was already screwed up at this point. > > Can you have a good output by any chance (showing the right contents > of /proc/asound/card1/codec#*)? Using the linux version I've normally used: $ cat /proc/version Linux version 3.11.0-031100rc2-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201307211535 SMP Sun Jul 21 19:45:33 UTC 201 $ cat /proc/asound/card1/codec#0 Codec: Realtek ALC271X Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0269 Subsystem Id: 0x10250740 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC271X Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC271X Analog", type="Audio", device=0 Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x13 0x13] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x8b 0x8b] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Internal Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=3, ofs=0 Control: name="Internal Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=3, ofs=0 Control: name="Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00] [0x80] Connection: 2 0x02 0x0b Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40000b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Phantom Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010014: OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 2 0x0c 0x0d* Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x17 [Pin Complex] wcaps 0x40010c: Mono Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Pincap 0x00000010: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Connection: 1 0x0f Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00001734: IN OUT Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x0d Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Mic Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00001724: IN Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000003c: IN OUT HP Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 2 0x0c* 0x0d Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Control: name="Internal Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Internal Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x03 0x03] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00000034: IN OUT Detect Pin Default 0x90a70920: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x2, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 2 0x0c* 0x0d Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x00000020: IN Pin Default 0x4017992d: [N/A] Speaker at Ext N/A Conn = Analog, Color = Pink DefAssociation = 0x2, Sequence = 0xd Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1e [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=25 Node 0x21 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000001c: OUT HP Detect Pin Default 0x0321401f: [Jack] HP Out at Ext Left Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Connection: 2 0x0c* 0x0d Node 0x22 [Audio Selector] wcaps 0x30010b: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Connection: 7 0x18* 0x19 0x1a 0x1b 0x1d 0x0b 0x12 Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80] Connection: 6 0x18 0x19 0x1a 0x1b 0x1d 0x0b ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message 2013-11-14 17:52 ` Joe Perches @ 2013-11-15 6:34 ` Takashi Iwai 2013-11-15 6:56 ` Takashi Iwai 1 sibling, 0 replies; 11+ messages in thread From: Takashi Iwai @ 2013-11-15 6:34 UTC (permalink / raw) To: Joe Perches; +Cc: alsa-devel At Thu, 14 Nov 2013 09:52:34 -0800, Joe Perches wrote: > > On Thu, 2013-11-14 at 18:28 +0100, Takashi Iwai wrote: > > At Fri, 08 Nov 2013 20:41:34 -0800, > > Joe Perches wrote: > [] > > > !!HDA-Intel Codec information > > > !!--------------------------- > > > --startcollapse-- > > > > > > Codec: ATI ID aa01 > > > > You didn't enable CONFIG_SND_HDA_CODEC_HDMI, right? > > No, it's enabled. > > > Build with it, at least. > > $ grep CONFIG_SND_HDA_CODEC_HDMI /boot/config-3.12.0 > CONFIG_SND_HDA_CODEC_HDMI=y Weird. Try to build all sound drivers as modules and see whether the ID string of HDMI codec is still shown like that or a proper name like "ATI R6xx HDMI". If this works, could you try the patch below and see whether it works better now with built-in kernel? Takashi --- diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index afb90f48867f..80736e5af548 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -976,6 +976,7 @@ find_codec_preset(struct hda_codec *codec) mutex_unlock(&preset_mutex); if (mod_requested < HDA_MODREQ_MAX_COUNT) { +#ifdef CONFIG_SND_HDA_INTEL_MODULE char name[32]; if (!mod_requested) snprintf(name, sizeof(name), "snd-hda-codec-id:%08x", @@ -986,6 +987,7 @@ find_codec_preset(struct hda_codec *codec) request_module(name); mod_requested++; goto again; +#endif /* CONFIG_SND_HDA_INTEL_MODULE */ } return NULL; } ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message 2013-11-14 17:52 ` Joe Perches 2013-11-15 6:34 ` Takashi Iwai @ 2013-11-15 6:56 ` Takashi Iwai 2013-11-19 8:40 ` Joe Perches 1 sibling, 1 reply; 11+ messages in thread From: Takashi Iwai @ 2013-11-15 6:56 UTC (permalink / raw) To: Joe Perches; +Cc: alsa-devel [-- Attachment #1: Type: text/plain, Size: 1200 bytes --] At Thu, 14 Nov 2013 09:52:34 -0800, Joe Perches wrote: > > > Hrm, the codec proc for the analog audio isn't seen here. > > Maybe the codec communication was already screwed up at this point. > > > > Can you have a good output by any chance (showing the right contents > > of /proc/asound/card1/codec#*)? > > Using the linux version I've normally used: > > $ cat /proc/version > Linux version 3.11.0-031100rc2-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201307211535 SMP Sun Jul 21 19:45:33 UTC 201 > > $ cat /proc/asound/card1/codec#0 > Codec: Realtek ALC271X So this codec was detected properly. Judging from your patch description, the verb triggering the stall (0x170500) was about the power up to D0 for AFG node. Did the sound work even after the flood of the messages? The problem might be also not a stall but a bogus CORB/RIRB pointer. Try the first patch, and give the first "spurious response" message. Now it shows rp and wp values, and we might see a pattern in them to trigger the spurious message (e.g. wp is always same value). Also, to be sure, try the second patch, too. It disables the access to some vendor-specific verbs. Takashi --- [-- Attachment #2: spurious-rp-wp.diff --] [-- Type: application/octet-stream, Size: 627 bytes --] diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 7a09404579a7..7f39e71cb705 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -915,10 +915,10 @@ static void azx_update_rirb(struct azx *chip) smp_wmb(); chip->rirb.cmds[addr]--; } else if (printk_ratelimit()) { - snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, last cmd=%#08x\n", + snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, last cmd=%#08x, rp=0x%x, wp=0x%x\n", pci_name(chip->pci), res, res_ex, - chip->last_cmd[addr]); + chip->last_cmd[addr], rp, wp); } } } [-- Attachment #3: alc-avoid-coef-access.diff --] [-- Type: application/octet-stream, Size: 1153 bytes --] diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 04d1e6be600e..87e32624522e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4340,8 +4340,10 @@ static int patch_alc269(struct hda_codec *codec) } if (err < 0) goto error; +#if 0 spec->init_hook = alc269_fill_coef; alc269_fill_coef(codec); +#endif break; case 0x10ec0280: @@ -4373,10 +4375,12 @@ static int patch_alc269(struct hda_codec *codec) break; } +#if 0 if (snd_hda_codec_read(codec, 0x51, 0, AC_VERB_PARAMETERS, 0) == 0x10ec5505) { spec->has_alc5505_dsp = true; spec->init_hook = alc5505_dsp_init; } +#endif /* automatic parse from the BIOS config */ err = alc269_parse_auto_config(codec); @@ -4387,12 +4391,14 @@ static int patch_alc269(struct hda_codec *codec) set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT); codec->patch_ops = alc_patch_ops; +#if 0 #ifdef CONFIG_PM codec->patch_ops.suspend = alc269_suspend; codec->patch_ops.resume = alc269_resume; #endif if (!spec->shutup) spec->shutup = alc269_shutup; +#endif snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE); [-- Attachment #4: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message 2013-11-15 6:56 ` Takashi Iwai @ 2013-11-19 8:40 ` Joe Perches 2013-11-19 8:57 ` Takashi Iwai 0 siblings, 1 reply; 11+ messages in thread From: Joe Perches @ 2013-11-19 8:40 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel On Fri, 2013-11-15 at 07:56 +0100, Takashi Iwai wrote: > At Thu, 14 Nov 2013 09:52:34 -0800, > Joe Perches wrote: > > > > > Hrm, the codec proc for the analog audio isn't seen here. > > > Maybe the codec communication was already screwed up at this point. > > > > > > Can you have a good output by any chance (showing the right contents > > > of /proc/asound/card1/codec#*)? > > > > Using the linux version I've normally used: > > > > $ cat /proc/version > > Linux version 3.11.0-031100rc2-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201307211535 SMP Sun Jul 21 19:45:33 UTC 201 > > > > $ cat /proc/asound/card1/codec#0 > > Codec: Realtek ALC271X > > So this codec was detected properly. Judging from your patch > description, the verb triggering the stall (0x170500) was about the > power up to D0 for AFG node. Did the sound work even after the flood > of the messages? > > The problem might be also not a stall but a bogus CORB/RIRB pointer. > Try the first patch, and give the first "spurious response" message. > Now it shows rp and wp values, and we might see a pattern in them to > trigger the spurious message (e.g. wp is always same value). > > Also, to be sure, try the second patch, too. It disables the access > to some vendor-specific verbs. Hi again. I'm not ignoring you. I've rebuilt the kernel with these patches and I'm waiting for the messages to show up again. The only times I've seen them have been after hibernating and resuming. I've done several hibernate/restart cycles but haven't had the messages emitted in the logs yet. cheers, Joe ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message 2013-11-19 8:40 ` Joe Perches @ 2013-11-19 8:57 ` Takashi Iwai 0 siblings, 0 replies; 11+ messages in thread From: Takashi Iwai @ 2013-11-19 8:57 UTC (permalink / raw) To: Joe Perches; +Cc: alsa-devel At Tue, 19 Nov 2013 00:40:07 -0800, Joe Perches wrote: > > On Fri, 2013-11-15 at 07:56 +0100, Takashi Iwai wrote: > > At Thu, 14 Nov 2013 09:52:34 -0800, > > Joe Perches wrote: > > > > > > > Hrm, the codec proc for the analog audio isn't seen here. > > > > Maybe the codec communication was already screwed up at this point. > > > > > > > > Can you have a good output by any chance (showing the right contents > > > > of /proc/asound/card1/codec#*)? > > > > > > Using the linux version I've normally used: > > > > > > $ cat /proc/version > > > Linux version 3.11.0-031100rc2-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201307211535 SMP Sun Jul 21 19:45:33 UTC 201 > > > > > > $ cat /proc/asound/card1/codec#0 > > > Codec: Realtek ALC271X > > > > So this codec was detected properly. Judging from your patch > > description, the verb triggering the stall (0x170500) was about the > > power up to D0 for AFG node. Did the sound work even after the flood > > of the messages? > > > > The problem might be also not a stall but a bogus CORB/RIRB pointer. > > Try the first patch, and give the first "spurious response" message. > > Now it shows rp and wp values, and we might see a pattern in them to > > trigger the spurious message (e.g. wp is always same value). > > > > Also, to be sure, try the second patch, too. It disables the access > > to some vendor-specific verbs. > > Hi again. > > I'm not ignoring you. > I've rebuilt the kernel with these patches and > I'm waiting for the messages to show up again. > > The only times I've seen them have been after > hibernating and resuming. Ah, that's an important piece. > I've done several hibernate/restart cycles but > haven't had the messages emitted in the logs yet. OK, let me know if you still hit the issue. thanks, Takashi ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2013-11-19 8:57 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-11-07 19:55 [RFC PATCH] hda_intel: ratelimit "spurious response" message Joe Perches 2013-11-07 20:23 ` Takashi Iwai 2013-11-07 20:28 ` Joe Perches 2013-11-08 10:59 ` Takashi Iwai 2013-11-09 4:41 ` Joe Perches 2013-11-14 17:28 ` Takashi Iwai 2013-11-14 17:52 ` Joe Perches 2013-11-15 6:34 ` Takashi Iwai 2013-11-15 6:56 ` Takashi Iwai 2013-11-19 8:40 ` Joe Perches 2013-11-19 8:57 ` Takashi Iwai
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).