From: Olivier Langlois <olivier@trillion01.com>
To: Anssi Hannula <anssi.hannula@iki.fi>
Cc: "Takashi Iwai" <tiwai@suse.de>,
alsa-devel@alsa-project.org,
"Peter Frühberger" <fritsch@xbmc.org>
Subject: Re: [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support
Date: Fri, 08 Nov 2013 16:28:39 -0500 [thread overview]
Message-ID: <1383946119.1089.4.camel@Wailaba2> (raw)
In-Reply-To: <1383934622.22680.2.camel@Wailaba2>
On Fri, 2013-11-08 at 13:17 -0500, Olivier Langlois wrote:
> > >
> > > What is sound-next? A git branch? Where can I get it?
> >
> > The sound tree is at:
> > https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/
> >
> > You can use the master branch now, it has been merged there.
> >
> I'm no git expert but I had problem cloning the repository:
>
> lano1106@whippet2 ~/dev $ git clone
> https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/
> Cloning into 'sound'...
> error: Unable to find 97c4de8fc0a47b99220b1209c7457c7dde05637a under
> https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git
> Cannot obtain needed object 97c4de8fc0a47b99220b1209c7457c7dde05637a
> while processing commit ff8c5075a3b474cd9e422eb7e5a97e48f38a9b08.
>
>
> but I did cherrypicked successfully hda_codec,hda_jack,hda_eld and
> patch_hdmi modules from the browser interface of the repo and 3.11.7 did
> compile fine.
>
> I'll probably be able to report the testing of your patch sometime later
> this afternoon.
>
Hi Anssi,
here is initial result of my testing of v3 of your patch.
Either my backporting missed something or a regression has slipped into
the newest version but speaker mapping looks slightly broken. I have
this:
lano1106@whippet2 ~ $ speaker-test -D hdmi:CARD=HDMI,DEV=0 -c8 -r192000
-F S32_LE
speaker-test 1.0.27.2
Playback device is hdmi:CARD=HDMI,DEV=0
Stream parameters are 192000Hz, S32_LE, 8 channels
Using 16 octaves of pink noise
Rate set to 192000Hz (requested 192000Hz)
Buffer size range from 8 to 131072
Period size range from 4 to 65536
Using max buffer size 131072
Periods = 4
was set period_size = 32768
was set buffer_size = 131072
0 - Front Left
4 - Center
1 - Front Right
7 - Side Right
7 - Side Right
6 - Side Left
6 - Side Left
5 - LFE
With v2, rear channels were there.
Codec: ATI R6xx HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x1002aa01
Subsystem Id: 0x00aa0100
Revision Id: 0x100300
next prev parent reply other threads:[~2013-11-08 21:28 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-24 18:10 [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Anssi Hannula
2013-10-24 18:10 ` [PATCH 1/5] ALSA: hda - hdmi: Allow HDA patches to customize more operations Anssi Hannula
2013-10-24 18:10 ` [PATCH 2/5] ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support Anssi Hannula
2013-10-24 18:10 ` [PATCH 3/5] ALSA: hda - hdmi: Add ELD emulation for ATI/AMD codecs Anssi Hannula
2013-10-24 18:10 ` [PATCH 4/5] ALSA: hda - hdmi: Add HBR bitstreaming support for ATI/AMD HDMI codecs Anssi Hannula
2013-10-24 18:10 ` [PATCH 5/5] ALSA: hda - hdmi: Disable ramp-up/down for non-PCM on AMD codecs Anssi Hannula
2013-10-24 19:00 ` Anssi Hannula
2013-10-24 18:26 ` [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Anssi Hannula
2013-11-08 5:08 ` Olivier Langlois
2013-11-08 10:27 ` Anssi Hannula
2013-11-08 18:17 ` Olivier Langlois
2013-11-08 21:28 ` Olivier Langlois [this message]
2013-11-08 22:03 ` Anssi Hannula
2013-11-10 5:42 ` Olivier Langlois
2013-11-10 6:01 ` Anssi Hannula
2013-11-10 7:25 ` speaker-test chmap bugs (was: [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support) Anssi Hannula
2013-11-10 18:29 ` [PATCH 1/3] speaker-test: Fix chmapped channel selection without specified chmap Anssi Hannula
2013-11-10 18:29 ` [PATCH 2/3] speaker-test: Always show chmap channel names if available Anssi Hannula
2013-11-10 18:29 ` [PATCH 3/3] speaker-test: Show out-of-chmap channels as Unknown Anssi Hannula
2013-11-11 15:56 ` [PATCH 1/3] speaker-test: Fix chmapped channel selection without specified chmap Takashi Iwai
2013-11-11 20:23 ` Anssi Hannula
2013-11-11 22:04 ` [PATCH 1/3 v2] " Anssi Hannula
2013-11-12 8:11 ` Takashi Iwai
2013-11-12 12:34 ` Anssi Hannula
2013-11-12 13:08 ` Takashi Iwai
2013-11-12 6:35 ` [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Olivier Langlois
2013-11-14 0:04 ` Anssi Hannula
2013-11-09 8:35 ` Takashi Iwai
2013-10-24 23:04 ` Takashi Iwai
2013-10-25 16:54 ` Andre Heider
2013-10-25 17:13 ` Takashi Iwai
2013-10-25 17:23 ` Anssi Hannula
2013-10-25 18:25 ` Andre Heider
2013-10-28 17:52 ` Andre Heider
2013-10-28 18:12 ` Anssi Hannula
2013-10-28 18:17 ` Andre Heider
2013-10-28 18:25 ` Anssi Hannula
2013-10-28 18:35 ` Andre Heider
2013-10-28 20:35 ` Anssi Hannula
2013-10-28 22:00 ` Andre Heider
2013-10-28 22:42 ` Anssi Hannula
2013-10-28 23:15 ` Andre Heider
2013-10-29 19:52 ` LANGLOIS Olivier PIS -EXT
2013-10-29 20:30 ` Anssi Hannula
2013-10-28 23:19 ` [PATCH] drm/radeon/audio: fix missing multichannel PCM SAD in some cases Anssi Hannula
2013-10-31 23:38 ` Rafał Miłecki
2013-10-31 23:46 ` Rafał Miłecki
2013-10-31 23:52 ` Anssi Hannula
2013-11-02 1:01 ` Rafał Miłecki
2013-11-02 1:08 ` Anssi Hannula
2013-11-02 1:15 ` Rafał Miłecki
2013-11-02 1:03 ` Rafał Miłecki
2013-11-02 15:32 ` [PATCH v3 0/5] ALSA: hda - hdmi: ATI/AMD multi-channel and HBR support Anssi Hannula
2013-11-23 1:05 ` James Le Cuirot
2013-11-23 1:29 ` Anssi Hannula
2013-11-23 15:40 ` James Le Cuirot
2013-11-23 15:45 ` Anssi Hannula
2013-11-24 14:57 ` James Le Cuirot
2013-11-25 13:20 ` Anssi Hannula
2013-11-25 14:32 ` James Le Cuirot
2013-11-25 14:56 ` Anssi Hannula
2014-05-13 12:01 ` James Le Cuirot
2014-05-13 12:27 ` Anssi Hannula
2014-05-13 16:16 ` James Le Cuirot
2014-05-13 21:10 ` James Le Cuirot
2014-05-13 21:50 ` Anssi Hannula
2014-05-14 13:04 ` Deucher, Alexander
2014-05-14 13:19 ` James Le Cuirot
2013-11-25 15:07 ` Raymond Yau
2013-11-25 15:32 ` James Le Cuirot
2013-11-25 19:35 ` Anssi Hannula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383946119.1089.4.camel@Wailaba2 \
--to=olivier@trillion01.com \
--cc=alsa-devel@alsa-project.org \
--cc=anssi.hannula@iki.fi \
--cc=fritsch@xbmc.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).