* [RFC PATCH] hda_intel: ratelimit "spurious response" message
@ 2013-11-07 19:55 Joe Perches
2013-11-07 20:23 ` Takashi Iwai
0 siblings, 1 reply; 11+ messages in thread
From: Joe Perches @ 2013-11-07 19:55 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel, LKML
dmesg here has a 100+ consecutive lines of:
[ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
[ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
[ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
...
Ratelimit the message to reduce the dmesg log noise.
Coalesce the format while at it.
Signed-off-by: Joe Perches <joe@perches.com>
---
sound/pci/hda/hda_intel.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 6e61a01..6e444ca 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -906,12 +906,12 @@ static void azx_update_rirb(struct azx *chip)
chip->rirb.res[addr] = res;
smp_wmb();
chip->rirb.cmds[addr]--;
- } else
- snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, "
- "last cmd=%#08x\n",
+ } else if (printk_ratelimit()) {
+ snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, last cmd=%#08x\n",
pci_name(chip->pci),
res, res_ex,
chip->last_cmd[addr]);
+ }
}
}
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message
2013-11-07 19:55 [RFC PATCH] hda_intel: ratelimit "spurious response" message Joe Perches
@ 2013-11-07 20:23 ` Takashi Iwai
2013-11-07 20:28 ` Joe Perches
0 siblings, 1 reply; 11+ messages in thread
From: Takashi Iwai @ 2013-11-07 20:23 UTC (permalink / raw)
To: Joe Perches; +Cc: alsa-devel, LKML
At Thu, 07 Nov 2013 11:55:15 -0800,
Joe Perches wrote:
>
> dmesg here has a 100+ consecutive lines of:
>
> [ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> [ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> [ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> ...
>
> Ratelimit the message to reduce the dmesg log noise.
>
> Coalesce the format while at it.
>
> Signed-off-by: Joe Perches <joe@perches.com>
Thanks, applied.
BTW, which hardware shows this problem?
I'm interested rather in that...
Takashi
> ---
> sound/pci/hda/hda_intel.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
> index 6e61a01..6e444ca 100644
> --- a/sound/pci/hda/hda_intel.c
> +++ b/sound/pci/hda/hda_intel.c
> @@ -906,12 +906,12 @@ static void azx_update_rirb(struct azx *chip)
> chip->rirb.res[addr] = res;
> smp_wmb();
> chip->rirb.cmds[addr]--;
> - } else
> - snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, "
> - "last cmd=%#08x\n",
> + } else if (printk_ratelimit()) {
> + snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, last cmd=%#08x\n",
> pci_name(chip->pci),
> res, res_ex,
> chip->last_cmd[addr]);
> + }
> }
> }
>
>
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message
2013-11-07 20:23 ` Takashi Iwai
@ 2013-11-07 20:28 ` Joe Perches
2013-11-08 10:59 ` Takashi Iwai
0 siblings, 1 reply; 11+ messages in thread
From: Joe Perches @ 2013-11-07 20:28 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel, LKML
On Thu, 2013-11-07 at 21:23 +0100, Takashi Iwai wrote:
> At Thu, 07 Nov 2013 11:55:15 -0800,
> Joe Perches wrote:
> >
> > dmesg here has a 100+ consecutive lines of:
> >
> > [ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> > [ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> > [ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> > ...
> >
> > Ratelimit the message to reduce the dmesg log noise.
> >
> > Coalesce the format while at it.
> >
> > Signed-off-by: Joe Perches <joe@perches.com>
>
> Thanks, applied.
>
> BTW, which hardware shows this problem?
> I'm interested rather in that...
It's a little Acer netbook AO725
# lspci -v -v -s0:14.2
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
Subsystem: Acer Incorporated [ALI] Device 0740
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f0240000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41b3
Kernel driver in use: snd_hda_intel
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message
2013-11-07 20:28 ` Joe Perches
@ 2013-11-08 10:59 ` Takashi Iwai
2013-11-09 4:41 ` Joe Perches
0 siblings, 1 reply; 11+ messages in thread
From: Takashi Iwai @ 2013-11-08 10:59 UTC (permalink / raw)
To: Joe Perches; +Cc: alsa-devel, LKML
At Thu, 07 Nov 2013 12:28:18 -0800,
Joe Perches wrote:
>
> On Thu, 2013-11-07 at 21:23 +0100, Takashi Iwai wrote:
> > At Thu, 07 Nov 2013 11:55:15 -0800,
> > Joe Perches wrote:
> > >
> > > dmesg here has a 100+ consecutive lines of:
> > >
> > > [ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> > > [ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> > > [ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> > > ...
> > >
> > > Ratelimit the message to reduce the dmesg log noise.
> > >
> > > Coalesce the format while at it.
> > >
> > > Signed-off-by: Joe Perches <joe@perches.com>
> >
> > Thanks, applied.
> >
> > BTW, which hardware shows this problem?
> > I'm interested rather in that...
>
> It's a little Acer netbook AO725
>
> # lspci -v -v -s0:14.2
> 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
> Subsystem: Acer Incorporated [ALI] Device 0740
Could you give alsa-info.sh output (maybe better to get it after
applying your patch)? It'll show more comprehensive information.
thanks,
Takashi
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message
2013-11-08 10:59 ` Takashi Iwai
@ 2013-11-09 4:41 ` Joe Perches
2013-11-14 17:28 ` Takashi Iwai
0 siblings, 1 reply; 11+ messages in thread
From: Joe Perches @ 2013-11-09 4:41 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
(dropping lkml from cc's)
On Fri, 2013-11-08 at 11:59 +0100, Takashi Iwai wrote:
> At Thu, 07 Nov 2013 12:28:18 -0800,
> Joe Perches wrote:
> > On Thu, 2013-11-07 at 21:23 +0100, Takashi Iwai wrote:
> > > At Thu, 07 Nov 2013 11:55:15 -0800,
> > > Joe Perches wrote:
> > > > dmesg here has a 100+ consecutive lines of:
> > > > [ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> > > > [ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> > > > [ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> > > > ...
> > > > Ratelimit the message to reduce the dmesg log noise.
> > > > Coalesce the format while at it.
> > > Thanks, applied.
> > > BTW, which hardware shows this problem?
> > > I'm interested rather in that...
> > It's a little Acer netbook AO725
> > # lspci -v -v -s0:14.2
> > 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
> > Subsystem: Acer Incorporated [ALI] Device 0740
> Could you give alsa-info.sh output (maybe better to get it after
> applying your patch)? It'll show more comprehensive information.
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.62
!!################################
!!Script ran on: Sat Nov 9 04:36:16 UTC 2013
!!Linux Distribution
!!------------------
Ubuntu 13.10 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 13.10" NAME="Ubuntu" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 13.10" HOME_URL="http://www.ubuntu.com/" SUPPORT_URL="http://help.ubuntu.com/" BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
!!DMI Information
!!---------------
Manufacturer: Acer
Product Name: AO725
Product Version: V2.12
Firmware Version: V2.12
!!Kernel Information
!!------------------
Kernel release: 3.12.0
Operating System: GNU/Linux
Architecture: i686
Processor: athlon
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k3.12.0
Library version: 1.0.27.2
Utilities version: 1.0.27.1
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xf0244000 irq 45
!!PCI Soundcards installed in the system
!!--------------------------------------
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------
00:01.1 0403: 1002:1314
Subsystem: 1025:0740
--
00:14.2 0403: 1022:780d (rev 01)
Subsystem: 1025:0740
!!Modprobe options (Sound related)
!!--------------------------------
snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_usb_audio: index=-2
snd_usb_caiaq: index=-2
snd_usb_ua101: index=-2
snd_usb_us122l: index=-2
snd_usb_usx2y: index=-2
snd_cmipci: mpu_port=0x330 fm_port=0x388
snd_pcsp: index=-2
snd_usb_audio: index=-2
!!Loaded sound module options
!!---------------------------
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 32,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 1
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : Y
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: ATI ID aa01
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x1002aa01
Subsystem Id: 0x00aa0100
Revision Id: 0x100200
No Modem Function Group found
Default PCM:
rates [0x70]: 32000 44100 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3
Power: setting=D0, actual=D0
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Device: name="ID aa01 Digital", type="HDMI", device=3
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
Control: name="HDMI Jack", index=0, device=0
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Connection: 1
0x02
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 4 Nov 8 20:34 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 6 Nov 8 20:36 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 3 Nov 8 20:34 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 5 Nov 8 20:36 /dev/snd/hwC1D0
crw-rw----+ 1 root audio 116, 2 Nov 8 20:35 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116, 1 Nov 8 20:34 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Nov 8 20:34 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Nov 8 20:36 .
drwxr-xr-x 3 root root 200 Nov 8 20:36 ..
lrwxrwxrwx 1 root root 12 Nov 8 20:34 pci-0000:00:01.1 -> ../controlC0
lrwxrwxrwx 1 root root 12 Nov 8 20:36 pci-0000:00:14.2 -> ../controlC1
!!ALSA configuration files
!!------------------------
!!System wide config file (/etc/asound.conf)
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
}
ctl.!default {
type pulse
}
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: ID aa01 Digital [ID aa01 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Generic]
Card hw:0 'Generic'/'HD-Audio Generic at 0xf0244000 irq 45'
Mixer name : 'ATI ID aa01'
Components : 'HDA:1002aa01,00aa0100,00100200'
Controls : 6
Simple ctrls : 1
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
!!-------Mixer controls for card 1 ]
Card hw:1 'Generic_1'/'HD-Audio Generic at 0xf0240000 irq 46'
Mixer name : 'Realtek ALC271X'
Components : 'HDA:10ec0269,10250740,00100100'
Controls : 21
Simple ctrls : 10
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 0 [0%] [-65.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 0 [0%] [-65.25dB] [on]
Front Right: Playback 0 [0%] [-65.25dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 0 [0%] [-51.00dB]
Front Right: Playback 0 [0%] [-51.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 127
Front Left: 127 [100%] [0.00dB]
Front Right: 127 [100%] [0.00dB]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 127
Front Left: Capture 127 [100%] [0.00dB] [on]
Front Right: Capture 127 [100%] [0.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Internal Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 127
Front Left: 127 [100%] [0.00dB]
Front Right: 127 [100%] [0.00dB]
!!Alsactl output
!!--------------
--startcollapse--
state.Generic {
control.1 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.2 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.3 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.4 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.5 {
iface CARD
name 'HDMI Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.6 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
}
state.Generic_1 {
control.1 {
iface MIXER
name 'Headphone Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.2 {
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Speaker Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
dbvalue.1 -6525
}
}
control.4 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Internal Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.6 {
iface MIXER
name 'Internal Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.7 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.8 {
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.9 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.10 {
iface MIXER
name 'Capture Volume'
value.0 127
value.1 127
comment {
access 'read write'
type INTEGER
count 2
range '0 - 127'
dbmin -9999999
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.11 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.12 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 127
value.1 127
comment {
access 'read write'
type INTEGER
count 2
range '0 - 127'
dbmin -9999999
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.13 {
iface MIXER
name 'Mic Boost Volume'
value.0 127
value.1 127
comment {
access 'read write'
type INTEGER
count 2
range '0 - 127'
dbmin -9999999
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.14 {
iface MIXER
name 'Master Playback Volume'
value 0
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
}
}
control.15 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.16 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.17 {
iface CARD
name 'Mic Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.18 {
iface CARD
name 'Headphone Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.19 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.20 {
iface MIXER
name 'Beep Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
}
}
control.21 {
iface MIXER
name 'Beep Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.22 {
iface MIXER
name 'PCM Playback Volume'
value.0 0
value.1 0
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -5100
dbvalue.1 -5100
}
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
arc4
brcmsmac
cordic
brcmutil
b43
mac80211
cfg80211
joydev
acer_wmi
sparse_keymap
ssb
kvm
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
microcode
videodev
psmouse
serio_raw
snd_hda_codec_realtek
parport_pc
ppdev
snd_hda_intel
k10temp
snd_hda_codec
i2c_piix4
snd_hwdep
bnep
rfcomm
bluetooth
snd_pcm
wmi
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
video
snd_seq
snd_seq_device
snd_timer
snd
binfmt_misc
mac_hid
bcma
soundcore
lp
parport
ahci
libahci
ohci_pci
r8169
mii
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:
0x03 0x18560010
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC1D0/init_pin_configs:
0x12 0x411111f0
0x14 0x90170110
0x17 0x411111f0
0x18 0x411111f0
0x19 0x411111f0
0x1a 0x411111f0
0x1b 0x90a70920
0x1d 0x4017992d
0x1e 0x411111f0
0x21 0x0321401f
/sys/class/sound/hwC1D0/driver_pin_configs:
0x14 0x99130110
0x19 0x01a19c20
0x1b 0x99a7012f
0x21 0x0121401f
/sys/class/sound/hwC1D0/user_pin_configs:
/sys/class/sound/hwC1D0/init_verbs:
/sys/class/sound/hwC1D0/hints:
!!ALSA/HDA dmesg
!!--------------
[ 12.904619] Request for unknown module key 'Magrathea: Glacier signing key: 67fb854805331643285fac717c3eca13bcd27a11' err -11
[ 12.934419] hda-intel 0000:00:01.1: Using LPIB position fix
[ 12.934926] snd_hda_intel 0000:00:01.1: irq 45 for MSI/MSI-X
[ 12.939349] ppdev: user-space parallel port driver
[ 12.953651] Request for unknown module key 'Magrathea: Glacier signing key: 67fb854805331643285fac717c3eca13bcd27a11' err -11
[ 12.980331] hda-intel 0000:00:01.1: Enable sync_write for stable communication
[ 13.023285] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
--
[ 13.023319] inputs:
[ 13.024262] input: HD-Audio Generic HDMI as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
[ 13.047906] hda-intel 0000:00:14.2: Using LPIB position fix
[ 13.113364] snd_hda_intel 0000:00:14.2: irq 46 for MSI/MSI-X
[ 13.143431] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[ 13.161091] init: avahi-cups-reload main process (467) terminated with status 1
--
[ 19.376633] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243
[ 19.920196] hda_codec: rates == 0 (nid=0x2, val=0x0, ovrd=1)
[ 19.920212] hda_codec: cannot attach PCM stream 0 for codec #0
[ 21.201741] type=1400 audit(1383971659.219:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1158 comm="apparmor_parser"
--
[ 22.841535] type=1400 audit(1383971660.859:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1203 comm="apparmor_parser"
[ 22.940626] hda-codec: out of range cmd 0:20:400:ffffffff
[ 22.953083] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement)
--
[ 24.968914] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[ 25.961020] hda-codec: out of range cmd 0:20:400:ffffffff
[ 26.014218] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
--
[ 28.872890] type=1400 audit(1383971666.887:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-ofono" pid=1209 comm="apparmor_parser"
[ 28.977442] hda-codec: out of range cmd 0:20:400:ffffffff
[ 30.839285] type=1400 audit(1383971668.855:21): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1355 comm="apparmor_parser"
--
[ 31.674152] type=1400 audit(1383971669.691:24): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1361 comm="apparmor_parser"
[ 31.997829] hda-codec: out of range cmd 0:20:400:ffffffff
[ 32.480075] type=1400 audit(1383971670.495:25): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1363 comm="apparmor_parser"
--
[ 57.577932] init: plymouth-stop pre-start process (2080) terminated with status 1
[ 139.549955] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input19
[ 139.550275] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input18
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message
2013-11-09 4:41 ` Joe Perches
@ 2013-11-14 17:28 ` Takashi Iwai
2013-11-14 17:52 ` Joe Perches
0 siblings, 1 reply; 11+ messages in thread
From: Takashi Iwai @ 2013-11-14 17:28 UTC (permalink / raw)
To: Joe Perches; +Cc: alsa-devel
At Fri, 08 Nov 2013 20:41:34 -0800,
Joe Perches wrote:
>
> (dropping lkml from cc's)
>
> On Fri, 2013-11-08 at 11:59 +0100, Takashi Iwai wrote:
> > At Thu, 07 Nov 2013 12:28:18 -0800,
> > Joe Perches wrote:
> > > On Thu, 2013-11-07 at 21:23 +0100, Takashi Iwai wrote:
> > > > At Thu, 07 Nov 2013 11:55:15 -0800,
> > > > Joe Perches wrote:
> > > > > dmesg here has a 100+ consecutive lines of:
> > > > > [ 1464.219446] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> > > > > [ 1464.219451] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> > > > > [ 1464.219454] hda-intel 0000:00:14.2: spurious response 0x0:0x0, last cmd=0x170500
> > > > > ...
> > > > > Ratelimit the message to reduce the dmesg log noise.
> > > > > Coalesce the format while at it.
> > > > Thanks, applied.
> > > > BTW, which hardware shows this problem?
> > > > I'm interested rather in that...
> > > It's a little Acer netbook AO725
> > > # lspci -v -v -s0:14.2
> > > 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
> > > Subsystem: Acer Incorporated [ALI] Device 0740
> > Could you give alsa-info.sh output (maybe better to get it after
> > applying your patch)? It'll show more comprehensive information.
>
> upload=true&script=true&cardinfo=
> !!################################
> !!ALSA Information Script v 0.4.62
> !!################################
>
> !!Script ran on: Sat Nov 9 04:36:16 UTC 2013
>
>
> !!Linux Distribution
> !!------------------
>
> Ubuntu 13.10 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 13.10" NAME="Ubuntu" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 13.10" HOME_URL="http://www.ubuntu.com/" SUPPORT_URL="http://help.ubuntu.com/" BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
>
>
> !!DMI Information
> !!---------------
>
> Manufacturer: Acer
> Product Name: AO725
> Product Version: V2.12
> Firmware Version: V2.12
>
>
> !!Kernel Information
> !!------------------
>
> Kernel release: 3.12.0
> Operating System: GNU/Linux
> Architecture: i686
> Processor: athlon
> SMP Enabled: Yes
>
>
> !!ALSA Version
> !!------------
>
> Driver version: k3.12.0
> Library version: 1.0.27.2
> Utilities version: 1.0.27.1
>
>
> !!Loaded ALSA modules
> !!-------------------
>
> snd_hda_intel
>
>
> !!Sound Servers on this system
> !!----------------------------
>
> Pulseaudio:
> Installed - Yes (/usr/bin/pulseaudio)
> Running - Yes
>
>
> !!Soundcards recognised by ALSA
> !!-----------------------------
>
> 0 [Generic ]: HDA-Intel - HD-Audio Generic
> HD-Audio Generic at 0xf0244000 irq 45
>
>
> !!PCI Soundcards installed in the system
> !!--------------------------------------
>
> 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio
> 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
>
>
> !!Advanced information - PCI Vendor/Device/Subsystem ID's
> !!-------------------------------------------------------
>
> 00:01.1 0403: 1002:1314
> Subsystem: 1025:0740
> --
> 00:14.2 0403: 1022:780d (rev 01)
> Subsystem: 1025:0740
>
>
> !!Modprobe options (Sound related)
> !!--------------------------------
>
> snd_atiixp_modem: index=-2
> snd_intel8x0m: index=-2
> snd_via82xx_modem: index=-2
> snd_usb_audio: index=-2
> snd_usb_caiaq: index=-2
> snd_usb_ua101: index=-2
> snd_usb_us122l: index=-2
> snd_usb_usx2y: index=-2
> snd_cmipci: mpu_port=0x330 fm_port=0x388
> snd_pcsp: index=-2
> snd_usb_audio: index=-2
>
>
> !!Loaded sound module options
> !!---------------------------
>
> !!Module: snd_hda_intel
> align_buffer_size : -1
> bdl_pos_adj : 32,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
> beep_mode : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
> enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
> enable_msi : -1
> id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
> index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
> jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
> model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
> patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
> position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
> power_save : 1
> power_save_controller : Y
> probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
> probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
> single_cmd : N
> snoop : Y
>
>
> !!HDA-Intel Codec information
> !!---------------------------
> --startcollapse--
>
> Codec: ATI ID aa01
You didn't enable CONFIG_SND_HDA_CODEC_HDMI, right?
Build with it, at least.
> Address: 0
> AFG Function Id: 0x1 (unsol 0)
> Vendor Id: 0x1002aa01
> Subsystem Id: 0x00aa0100
> Revision Id: 0x100200
> No Modem Function Group found
> Default PCM:
> rates [0x70]: 32000 44100 48000
> bits [0x2]: 16
> formats [0x1]: PCM
> Default Amp-In caps: N/A
> Default Amp-Out caps: N/A
> State of AFG node 0x01:
> Power states: D0 D3
> Power: setting=D0, actual=D0
> GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
> Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital
> Control: name="IEC958 Playback Con Mask", index=0, device=0
> Control: name="IEC958 Playback Pro Mask", index=0, device=0
> Control: name="IEC958 Playback Default", index=0, device=0
> Control: name="IEC958 Playback Switch", index=0, device=0
> Device: name="ID aa01 Digital", type="HDMI", device=3
> Converter: stream=0, channel=0
> Digital: Enabled
> Digital category: 0x0
> IEC Coding Type: 0x0
> Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
> Control: name="HDMI Jack", index=0, device=0
> Pincap 0x00000094: OUT Detect HDMI
> Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
> Conn = Digital, Color = Unknown
> DefAssociation = 0x1, Sequence = 0x0
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=01, enabled=1
> Connection: 1
> 0x02
> --endcollapse--
Hrm, the codec proc for the analog audio isn't seen here.
Maybe the codec communication was already screwed up at this point.
Can you have a good output by any chance (showing the right contents
of /proc/asound/card1/codec#*)?
Takashi
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message
2013-11-14 17:28 ` Takashi Iwai
@ 2013-11-14 17:52 ` Joe Perches
2013-11-15 6:34 ` Takashi Iwai
2013-11-15 6:56 ` Takashi Iwai
0 siblings, 2 replies; 11+ messages in thread
From: Joe Perches @ 2013-11-14 17:52 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
On Thu, 2013-11-14 at 18:28 +0100, Takashi Iwai wrote:
> At Fri, 08 Nov 2013 20:41:34 -0800,
> Joe Perches wrote:
[]
> > !!HDA-Intel Codec information
> > !!---------------------------
> > --startcollapse--
> >
> > Codec: ATI ID aa01
>
> You didn't enable CONFIG_SND_HDA_CODEC_HDMI, right?
No, it's enabled.
> Build with it, at least.
$ grep CONFIG_SND_HDA_CODEC_HDMI /boot/config-3.12.0
CONFIG_SND_HDA_CODEC_HDMI=y
> Hrm, the codec proc for the analog audio isn't seen here.
> Maybe the codec communication was already screwed up at this point.
>
> Can you have a good output by any chance (showing the right contents
> of /proc/asound/card1/codec#*)?
Using the linux version I've normally used:
$ cat /proc/version
Linux version 3.11.0-031100rc2-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201307211535 SMP Sun Jul 21 19:45:33 UTC 201
$ cat /proc/asound/card1/codec#0
Codec: Realtek ALC271X
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0269
Subsystem Id: 0x10250740
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC271X Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC271X Analog", type="Audio", device=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x13 0x13]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x8b 0x8b]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Control: name="Internal Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Control: name="Internal Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=1, ofs=0
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00] [0x80]
Connection: 2
0x02 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40000b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010014: OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c 0x0d*
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00001734: IN OUT Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x0d
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00001724: IN Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003c: IN OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c* 0x0d
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Internal Mic Phantom Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x03 0x03]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00000034: IN OUT Detect
Pin Default 0x90a70920: [Fixed] Mic at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 2
0x0c* 0x0d
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x4017992d: [N/A] Speaker at Ext N/A
Conn = Analog, Color = Pink
DefAssociation = 0x2, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=25
Node 0x21 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x0321401f: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Connection: 2
0x0c* 0x0d
Node 0x22 [Audio Selector] wcaps 0x30010b: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]
Connection: 7
0x18* 0x19 0x1a 0x1b 0x1d 0x0b 0x12
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message
2013-11-14 17:52 ` Joe Perches
@ 2013-11-15 6:34 ` Takashi Iwai
2013-11-15 6:56 ` Takashi Iwai
1 sibling, 0 replies; 11+ messages in thread
From: Takashi Iwai @ 2013-11-15 6:34 UTC (permalink / raw)
To: Joe Perches; +Cc: alsa-devel
At Thu, 14 Nov 2013 09:52:34 -0800,
Joe Perches wrote:
>
> On Thu, 2013-11-14 at 18:28 +0100, Takashi Iwai wrote:
> > At Fri, 08 Nov 2013 20:41:34 -0800,
> > Joe Perches wrote:
> []
> > > !!HDA-Intel Codec information
> > > !!---------------------------
> > > --startcollapse--
> > >
> > > Codec: ATI ID aa01
> >
> > You didn't enable CONFIG_SND_HDA_CODEC_HDMI, right?
>
> No, it's enabled.
>
> > Build with it, at least.
>
> $ grep CONFIG_SND_HDA_CODEC_HDMI /boot/config-3.12.0
> CONFIG_SND_HDA_CODEC_HDMI=y
Weird. Try to build all sound drivers as modules and see whether the
ID string of HDMI codec is still shown like that or a proper name like
"ATI R6xx HDMI".
If this works, could you try the patch below and see whether it works
better now with built-in kernel?
Takashi
---
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index afb90f48867f..80736e5af548 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -976,6 +976,7 @@ find_codec_preset(struct hda_codec *codec)
mutex_unlock(&preset_mutex);
if (mod_requested < HDA_MODREQ_MAX_COUNT) {
+#ifdef CONFIG_SND_HDA_INTEL_MODULE
char name[32];
if (!mod_requested)
snprintf(name, sizeof(name), "snd-hda-codec-id:%08x",
@@ -986,6 +987,7 @@ find_codec_preset(struct hda_codec *codec)
request_module(name);
mod_requested++;
goto again;
+#endif /* CONFIG_SND_HDA_INTEL_MODULE */
}
return NULL;
}
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message
2013-11-14 17:52 ` Joe Perches
2013-11-15 6:34 ` Takashi Iwai
@ 2013-11-15 6:56 ` Takashi Iwai
2013-11-19 8:40 ` Joe Perches
1 sibling, 1 reply; 11+ messages in thread
From: Takashi Iwai @ 2013-11-15 6:56 UTC (permalink / raw)
To: Joe Perches; +Cc: alsa-devel
[-- Attachment #1: Type: text/plain, Size: 1200 bytes --]
At Thu, 14 Nov 2013 09:52:34 -0800,
Joe Perches wrote:
>
> > Hrm, the codec proc for the analog audio isn't seen here.
> > Maybe the codec communication was already screwed up at this point.
> >
> > Can you have a good output by any chance (showing the right contents
> > of /proc/asound/card1/codec#*)?
>
> Using the linux version I've normally used:
>
> $ cat /proc/version
> Linux version 3.11.0-031100rc2-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201307211535 SMP Sun Jul 21 19:45:33 UTC 201
>
> $ cat /proc/asound/card1/codec#0
> Codec: Realtek ALC271X
So this codec was detected properly. Judging from your patch
description, the verb triggering the stall (0x170500) was about the
power up to D0 for AFG node. Did the sound work even after the flood
of the messages?
The problem might be also not a stall but a bogus CORB/RIRB pointer.
Try the first patch, and give the first "spurious response" message.
Now it shows rp and wp values, and we might see a pattern in them to
trigger the spurious message (e.g. wp is always same value).
Also, to be sure, try the second patch, too. It disables the access
to some vendor-specific verbs.
Takashi
---
[-- Attachment #2: spurious-rp-wp.diff --]
[-- Type: application/octet-stream, Size: 627 bytes --]
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 7a09404579a7..7f39e71cb705 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -915,10 +915,10 @@ static void azx_update_rirb(struct azx *chip)
smp_wmb();
chip->rirb.cmds[addr]--;
} else if (printk_ratelimit()) {
- snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, last cmd=%#08x\n",
+ snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, last cmd=%#08x, rp=0x%x, wp=0x%x\n",
pci_name(chip->pci),
res, res_ex,
- chip->last_cmd[addr]);
+ chip->last_cmd[addr], rp, wp);
}
}
}
[-- Attachment #3: alc-avoid-coef-access.diff --]
[-- Type: application/octet-stream, Size: 1153 bytes --]
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 04d1e6be600e..87e32624522e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4340,8 +4340,10 @@ static int patch_alc269(struct hda_codec *codec)
}
if (err < 0)
goto error;
+#if 0
spec->init_hook = alc269_fill_coef;
alc269_fill_coef(codec);
+#endif
break;
case 0x10ec0280:
@@ -4373,10 +4375,12 @@ static int patch_alc269(struct hda_codec *codec)
break;
}
+#if 0
if (snd_hda_codec_read(codec, 0x51, 0, AC_VERB_PARAMETERS, 0) == 0x10ec5505) {
spec->has_alc5505_dsp = true;
spec->init_hook = alc5505_dsp_init;
}
+#endif
/* automatic parse from the BIOS config */
err = alc269_parse_auto_config(codec);
@@ -4387,12 +4391,14 @@ static int patch_alc269(struct hda_codec *codec)
set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
codec->patch_ops = alc_patch_ops;
+#if 0
#ifdef CONFIG_PM
codec->patch_ops.suspend = alc269_suspend;
codec->patch_ops.resume = alc269_resume;
#endif
if (!spec->shutup)
spec->shutup = alc269_shutup;
+#endif
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
[-- Attachment #4: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message
2013-11-15 6:56 ` Takashi Iwai
@ 2013-11-19 8:40 ` Joe Perches
2013-11-19 8:57 ` Takashi Iwai
0 siblings, 1 reply; 11+ messages in thread
From: Joe Perches @ 2013-11-19 8:40 UTC (permalink / raw)
To: Takashi Iwai; +Cc: alsa-devel
On Fri, 2013-11-15 at 07:56 +0100, Takashi Iwai wrote:
> At Thu, 14 Nov 2013 09:52:34 -0800,
> Joe Perches wrote:
> >
> > > Hrm, the codec proc for the analog audio isn't seen here.
> > > Maybe the codec communication was already screwed up at this point.
> > >
> > > Can you have a good output by any chance (showing the right contents
> > > of /proc/asound/card1/codec#*)?
> >
> > Using the linux version I've normally used:
> >
> > $ cat /proc/version
> > Linux version 3.11.0-031100rc2-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201307211535 SMP Sun Jul 21 19:45:33 UTC 201
> >
> > $ cat /proc/asound/card1/codec#0
> > Codec: Realtek ALC271X
>
> So this codec was detected properly. Judging from your patch
> description, the verb triggering the stall (0x170500) was about the
> power up to D0 for AFG node. Did the sound work even after the flood
> of the messages?
>
> The problem might be also not a stall but a bogus CORB/RIRB pointer.
> Try the first patch, and give the first "spurious response" message.
> Now it shows rp and wp values, and we might see a pattern in them to
> trigger the spurious message (e.g. wp is always same value).
>
> Also, to be sure, try the second patch, too. It disables the access
> to some vendor-specific verbs.
Hi again.
I'm not ignoring you.
I've rebuilt the kernel with these patches and
I'm waiting for the messages to show up again.
The only times I've seen them have been after
hibernating and resuming.
I've done several hibernate/restart cycles but
haven't had the messages emitted in the logs yet.
cheers, Joe
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [RFC PATCH] hda_intel: ratelimit "spurious response" message
2013-11-19 8:40 ` Joe Perches
@ 2013-11-19 8:57 ` Takashi Iwai
0 siblings, 0 replies; 11+ messages in thread
From: Takashi Iwai @ 2013-11-19 8:57 UTC (permalink / raw)
To: Joe Perches; +Cc: alsa-devel
At Tue, 19 Nov 2013 00:40:07 -0800,
Joe Perches wrote:
>
> On Fri, 2013-11-15 at 07:56 +0100, Takashi Iwai wrote:
> > At Thu, 14 Nov 2013 09:52:34 -0800,
> > Joe Perches wrote:
> > >
> > > > Hrm, the codec proc for the analog audio isn't seen here.
> > > > Maybe the codec communication was already screwed up at this point.
> > > >
> > > > Can you have a good output by any chance (showing the right contents
> > > > of /proc/asound/card1/codec#*)?
> > >
> > > Using the linux version I've normally used:
> > >
> > > $ cat /proc/version
> > > Linux version 3.11.0-031100rc2-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201307211535 SMP Sun Jul 21 19:45:33 UTC 201
> > >
> > > $ cat /proc/asound/card1/codec#0
> > > Codec: Realtek ALC271X
> >
> > So this codec was detected properly. Judging from your patch
> > description, the verb triggering the stall (0x170500) was about the
> > power up to D0 for AFG node. Did the sound work even after the flood
> > of the messages?
> >
> > The problem might be also not a stall but a bogus CORB/RIRB pointer.
> > Try the first patch, and give the first "spurious response" message.
> > Now it shows rp and wp values, and we might see a pattern in them to
> > trigger the spurious message (e.g. wp is always same value).
> >
> > Also, to be sure, try the second patch, too. It disables the access
> > to some vendor-specific verbs.
>
> Hi again.
>
> I'm not ignoring you.
> I've rebuilt the kernel with these patches and
> I'm waiting for the messages to show up again.
>
> The only times I've seen them have been after
> hibernating and resuming.
Ah, that's an important piece.
> I've done several hibernate/restart cycles but
> haven't had the messages emitted in the logs yet.
OK, let me know if you still hit the issue.
thanks,
Takashi
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2013-11-19 8:57 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-11-07 19:55 [RFC PATCH] hda_intel: ratelimit "spurious response" message Joe Perches
2013-11-07 20:23 ` Takashi Iwai
2013-11-07 20:28 ` Joe Perches
2013-11-08 10:59 ` Takashi Iwai
2013-11-09 4:41 ` Joe Perches
2013-11-14 17:28 ` Takashi Iwai
2013-11-14 17:52 ` Joe Perches
2013-11-15 6:34 ` Takashi Iwai
2013-11-15 6:56 ` Takashi Iwai
2013-11-19 8:40 ` Joe Perches
2013-11-19 8:57 ` Takashi Iwai
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).