[PATCH] wm8994: avoid to enable dcs done irq before init completion dcs_done

[wangbiao <biao.wang@intel.com>]

From: wang, biao <biao.wang@intel.com>
Date: Wed, 20 Nov 2013 17:53:28 +0800
Subject: [PATCH] wm8994: avoid to enable dcs done irq before init completion dcs_done

once code return from request_threaded_irq, irq was setup enabled by
default, but completion var dcs_done not got initialized yet, if then a
dcs done irq was raised, system will got hung as the sync mechanism is
invalid now.

so this patch try not enable irq when request it until we got things
ready.

Signed-off-by: wang, biao <biao.wang@intel.com>
Signed-off-by: Zhang, Di <di.zhang@intel.com>
---
 sound/soc/codecs/wm8994.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 86426a1..d7e59dd 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -3981,6 +3981,7 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 	struct wm8994 *control = dev_get_drvdata(codec->dev->parent);
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
 	struct snd_soc_dapm_context *dapm = &codec->dapm;
+	unsigned int dcs_done_irq;
 	unsigned int reg;
 	int ret, i;
 
@@ -4077,6 +4078,9 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 	wm8994_request_irq(wm8994->wm8994, WM8994_IRQ_TEMP_SHUT,
 			   wm8994_temp_shut, "Thermal shutdown", codec);
 
+	dcs_done_irq = regmap_irq_get_virq(wm8994->wm8994->irq_data,
+					   WM8994_IRQ_DCS_DONE);
+	irq_set_status_flags(dcs_done_irq, IRQ_NOAUTOEN);
 	ret = wm8994_request_irq(wm8994->wm8994, WM8994_IRQ_DCS_DONE,
 				 wm_hubs_dcs_done, "DC servo done",
 				 &wm8994->hubs);
@@ -4313,6 +4317,7 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 	}
 
 	wm_hubs_add_analogue_routes(codec, 0, 0);
+	enable_irq(dcs_done_irq);
 	snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon));
 
 	switch (control->type) {
-- 
1.7.0.4