From: Dylan Reid <dgreid@chromium.org>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, Dylan Reid <dgreid@chromium.org>, swarren@wwwdotorg.org
Subject: [RFC 15/19] ALSA: hda - Pass max_slots and power_save to codec_create
Date: Thu, 27 Feb 2014 22:35:58 -0800 [thread overview]
Message-ID: <1393569362-27285-16-git-send-email-dgreid@chromium.org> (raw)
In-Reply-To: <1393569362-27285-1-git-send-email-dgreid@chromium.org>
Passing the max slots and power save arguments to codec_create will
allow for its reuse by an hda_platform driver. It makes the function
independent of the module params in hda_intel and ready to move to
hda_shared in a following commit.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
---
sound/pci/hda/hda_intel.c | 28 +++++++++++++++++-----------
1 file changed, 17 insertions(+), 11 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 4fa4da1..a42c576 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -124,6 +124,7 @@ static struct kernel_param_ops param_ops_xint = {
#define param_check_xint param_check_int
static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
+static int *power_save_addr = &power_save;
module_param(power_save, xint, 0644);
MODULE_PARM_DESC(power_save, "Automatic power-saving timeout "
"(in second, 0 = disable).");
@@ -135,6 +136,8 @@ MODULE_PARM_DESC(power_save, "Automatic power-saving timeout "
static bool power_save_controller = 1;
module_param(power_save_controller, bool, 0644);
MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode.");
+#else
+static int *power_save_addr;
#endif /* CONFIG_PM */
static int align_buffer_size = -1;
@@ -458,17 +461,12 @@ static int get_jackpoll_interval(struct azx *chip)
* Codec initialization
*/
-/* number of codec slots for each chipset: 0 = default slots (i.e. 4) */
-static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = {
- [AZX_DRIVER_NVIDIA] = 8,
- [AZX_DRIVER_TERA] = 1,
-};
-
-static int azx_codec_create(struct azx *chip, const char *model)
+static int azx_codec_create(struct azx *chip, const char *model,
+ unsigned int max_slots,
+ int *power_save_to)
{
struct hda_bus_template bus_temp;
int c, codecs, err;
- int max_slots;
memset(&bus_temp, 0, sizeof(bus_temp));
bus_temp.private_data = chip;
@@ -479,7 +477,7 @@ static int azx_codec_create(struct azx *chip, const char *model)
bus_temp.ops.attach_pcm = azx_attach_pcm_stream;
bus_temp.ops.bus_reset = azx_bus_reset;
#ifdef CONFIG_PM
- bus_temp.power_save = &power_save;
+ bus_temp.power_save = power_save_to;
bus_temp.ops.pm_notify = azx_power_notify;
#endif
#ifdef CONFIG_SND_HDA_DSP_LOADER
@@ -498,7 +496,6 @@ static int azx_codec_create(struct azx *chip, const char *model)
}
codecs = 0;
- max_slots = azx_max_codecs[chip->driver_type];
if (!max_slots)
max_slots = AZX_DEFAULT_CODECS;
@@ -1619,6 +1616,12 @@ out_free:
return err;
}
+/* number of codec slots for each chipset: 0 = default slots (i.e. 4) */
+static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = {
+ [AZX_DRIVER_NVIDIA] = 8,
+ [AZX_DRIVER_TERA] = 1,
+};
+
static int azx_probe_continue(struct azx *chip)
{
struct pci_dev *pci = chip->pci;
@@ -1647,7 +1650,10 @@ static int azx_probe_continue(struct azx *chip)
#endif
/* create codec instances */
- err = azx_codec_create(chip, model[dev]);
+ err = azx_codec_create(chip, model[dev],
+ azx_max_codecs[chip->driver_type],
+ power_save_addr);
+
if (err < 0)
goto out_free;
#ifdef CONFIG_SND_HDA_PATCH_LOADER
--
1.8.1.3.605.g02339dd
next prev parent reply other threads:[~2014-02-28 6:37 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-28 6:35 [RFC 00/19] Enable platform HDA drivers Dylan Reid
2014-02-28 6:35 ` [RFC 01/19] ALSA: hda - Move some definitions to new hda_priv.h Dylan Reid
2014-02-28 6:35 ` [RFC 02/19] ALSA: hda - Allow different ops to read/write registers Dylan Reid
2014-02-28 6:35 ` [RFC 03/19] ALSA: hda - Keep pointer to bdl_pos_fix in chip struct Dylan Reid
2014-02-28 6:35 ` [RFC 04/19] ALSA: hda - Use device pointer from the card instead of pci Dylan Reid
2014-02-28 6:35 ` [RFC 05/19] ALSA: hda - Move pcm ops and support funcs to shared file Dylan Reid
2014-02-28 6:35 ` [RFC 06/19] ALSA: hda - Pull pages allocation " Dylan Reid
2014-02-28 6:35 ` [RFC 07/19] ALSA: hda - Move the dsp loader to hda_shared Dylan Reid
2014-02-28 6:35 ` [RFC 08/19] ALSA: hda - Add function pointer for disabling MSI Dylan Reid
2014-02-28 6:35 ` [RFC 09/19] ALSA: hda - Relocate RIRB/CORB interface to hda_shared Dylan Reid
2014-02-28 6:35 ` [RFC 10/19] ALSA: hda - move alloc_cmd_io " Dylan Reid
2014-02-28 6:35 ` [RFC 11/19] ALSA: hda - Move low level functions " Dylan Reid
2014-02-28 6:35 ` [RFC 12/19] ALSA: hda - remove unused clear of STATESTS Dylan Reid
2014-02-28 6:35 ` [RFC 13/19] ALSA: hda - Move azx_interrupt to hda_shared Dylan Reid
2014-02-28 6:35 ` [RFC 14/19] ALSA: hda - Add jackpoll_ms to struct azx Dylan Reid
2014-02-28 6:35 ` Dylan Reid [this message]
2014-02-28 6:35 ` [RFC 16/19] ALSA: hda - Move codec create to hda_shared Dylan Reid
2014-02-28 6:36 ` [RFC 17/19] ALSA: core - Define snd_pci_quirk without CONFIG_PCI Dylan Reid
2014-02-28 6:36 ` [RFC 18/19] ALSA: hda - remove PCI dependency in Kconfig Dylan Reid
2014-02-28 6:36 ` [RFC 19/19] WIP: ALSA: hda - Add driver for Tegra SoC HDA Dylan Reid
2014-02-28 7:57 ` [RFC 00/19] Enable platform HDA drivers Takashi Iwai
2014-02-28 8:31 ` Dylan Reid
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1393569362-27285-16-git-send-email-dgreid@chromium.org \
--to=dgreid@chromium.org \
--cc=alsa-devel@alsa-project.org \
--cc=swarren@wwwdotorg.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox