From: Lars-Peter Clausen <lars@metafoo.de>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org,
"Lars-Peter Clausen" <lars@metafoo.de>,
"Ryan Mallon" <rmallon@gmail.com>,
"Vinod Koul" <vinod.koul@intel.com>,
"Peter Ujfalusi" <peter.ujfalusi@ti.com>,
"Daniel Glöckner" <daniel-gl@gmx.net>,
"Benoit Cousson" <bcousson@baylibre.com>,
"Jarkko Nikula" <jarkko.nikula@bitmer.com>
Subject: [PATCH v2 02/12] ASoC: ams-delta: Convert to table based DAPM and control setup
Date: Wed, 12 Mar 2014 15:27:30 +0100 [thread overview]
Message-ID: <1394634460-15889-3-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1394634460-15889-1-git-send-email-lars@metafoo.de>
Use table based setup to register the controls and DAPM widgets and routes.
This on one hand makes the code a bit shorter and cleaner and on the other
hand the board level DAPM elements get registered in the card's DAPM context
rather than in the CODEC's DAPM context.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/omap/ams-delta.c | 64 +++++++++++++++-------------------------------
1 file changed, 21 insertions(+), 43 deletions(-)
diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c
index 14718cd..46d83f4 100644
--- a/sound/soc/omap/ams-delta.c
+++ b/sound/soc/omap/ams-delta.c
@@ -38,7 +38,6 @@
#include "omap-mcbsp.h"
#include "../codecs/cx20442.h"
-
/* Board specific DAPM widgets */
static const struct snd_soc_dapm_widget ams_delta_dapm_widgets[] = {
/* Handset */
@@ -90,17 +89,23 @@ static const unsigned short ams_delta_audio_mode_pins[] = {
static unsigned short ams_delta_audio_agc;
+/*
+ * Used for passing a codec structure pointer
+ * from the board initialization code to the tty line discipline.
+ */
+static struct snd_soc_codec *cx20442_codec;
+
static int ams_delta_set_audio_mode(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- struct snd_soc_dapm_context *dapm = &codec->dapm;
+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_dapm_context *dapm = &card->dapm;
struct soc_enum *control = (struct soc_enum *)kcontrol->private_value;
unsigned short pins;
int pin, changed = 0;
/* Refuse any mode changes if we are not able to control the codec. */
- if (!codec->hw_write)
+ if (!cx20442_codec->hw_write)
return -EUNATCH;
if (ucontrol->value.enumerated.item[0] >= control->max)
@@ -166,8 +171,8 @@ static int ams_delta_set_audio_mode(struct snd_kcontrol *kcontrol,
static int ams_delta_get_audio_mode(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- struct snd_soc_dapm_context *dapm = &codec->dapm;
+ struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_dapm_context *dapm = &card->dapm;
unsigned short pins, mode;
pins = ((snd_soc_dapm_get_pin_status(dapm, "Mouthpiece") <<
@@ -272,12 +277,6 @@ static void cx81801_timeout(unsigned long data)
ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, 0);
}
-/*
- * Used for passing a codec structure pointer
- * from the board initialization code to the tty line discipline.
- */
-static struct snd_soc_codec *cx20442_codec;
-
/* Line discipline .open() */
static int cx81801_open(struct tty_struct *tty)
{
@@ -304,7 +303,7 @@ static int cx81801_open(struct tty_struct *tty)
static void cx81801_close(struct tty_struct *tty)
{
struct snd_soc_codec *codec = tty->disc_data;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
+ struct snd_soc_dapm_context *dapm = &codec->card->dapm;
del_timer_sync(&cx81801_timer);
@@ -477,15 +476,14 @@ static void ams_delta_shutdown(struct snd_pcm_substream *substream)
static int ams_delta_cx20442_init(struct snd_soc_pcm_runtime *rtd)
{
- struct snd_soc_codec *codec = rtd->codec;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_card *card = rtd->card;
+ struct snd_soc_dapm_context *dapm = &card->dapm;
int ret;
/* Codec is ready, now add/activate board specific controls */
/* Store a pointer to the codec structure for tty ldisc use */
- cx20442_codec = codec;
+ cx20442_codec = rtd->codec;
/* Set up digital mute if not provided by the codec */
if (!codec_dai->driver->ops) {
@@ -522,25 +520,6 @@ static int ams_delta_cx20442_init(struct snd_soc_pcm_runtime *rtd)
return 0;
}
- /* Add board specific DAPM widgets and routes */
- ret = snd_soc_dapm_new_controls(dapm, ams_delta_dapm_widgets,
- ARRAY_SIZE(ams_delta_dapm_widgets));
- if (ret) {
- dev_warn(card->dev,
- "Failed to register DAPM controls, "
- "will continue without any.\n");
- return 0;
- }
-
- ret = snd_soc_dapm_add_routes(dapm, ams_delta_audio_map,
- ARRAY_SIZE(ams_delta_audio_map));
- if (ret) {
- dev_warn(card->dev,
- "Failed to set up DAPM routes, "
- "will continue with codec default map.\n");
- return 0;
- }
-
/* Set up initial pin constellation */
snd_soc_dapm_disable_pin(dapm, "Mouthpiece");
snd_soc_dapm_enable_pin(dapm, "Earpiece");
@@ -549,14 +528,6 @@ static int ams_delta_cx20442_init(struct snd_soc_pcm_runtime *rtd)
snd_soc_dapm_disable_pin(dapm, "AGCIN");
snd_soc_dapm_disable_pin(dapm, "AGCOUT");
- /* Add virtual switch */
- ret = snd_soc_add_codec_controls(codec, ams_delta_audio_controls,
- ARRAY_SIZE(ams_delta_audio_controls));
- if (ret)
- dev_warn(card->dev,
- "Failed to register audio mode control, "
- "will continue without it.\n");
-
return 0;
}
@@ -578,6 +549,13 @@ static struct snd_soc_card ams_delta_audio_card = {
.owner = THIS_MODULE,
.dai_link = &ams_delta_dai_link,
.num_links = 1,
+
+ .controls = ams_delta_audio_controls,
+ .num_controls = ARRAY_SIZE(ams_delta_audio_controls),
+ .dapm_widgets = ams_delta_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(ams_delta_dapm_widgets),
+ .dapm_routes = ams_delta_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(ams_delta_audio_map),
};
/* Module init/exit */
--
1.8.0
next prev parent reply other threads:[~2014-03-12 14:27 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-12 14:27 [PATCH v2 00/12] Cleanup card DAPM and control setup Lars-Peter Clausen
2014-03-12 14:27 ` [PATCH v2 01/12] ASoC: ams-delta: Fix compile error Lars-Peter Clausen
2014-03-12 14:27 ` Lars-Peter Clausen [this message]
2014-03-21 18:03 ` [PATCH v2 02/12] ASoC: ams-delta: Convert to table based DAPM and control setup Mark Brown
2014-03-12 14:27 ` [PATCH v2 03/12] ASoC: mfld_machine: " Lars-Peter Clausen
2014-03-21 18:04 ` Mark Brown
2014-03-12 14:27 ` [PATCH v2 04/12] ASoC: omap-abe-twl6040: Register machine level DMIC DAPM routes with the card Lars-Peter Clausen
2014-03-13 10:06 ` Peter Ujfalusi
2014-03-13 19:10 ` Mark Brown
2014-03-12 14:27 ` [PATCH v2 05/12] ASoC: omap: rx51: Convert to table based control and DAPM setup Lars-Peter Clausen
2014-03-21 18:03 ` Mark Brown
2014-03-12 14:27 ` [PATCH v2 06/12] ASoC: omap3pandora: Convert to table based " Lars-Peter Clausen
2014-03-21 18:04 ` Mark Brown
2014-03-12 14:27 ` [PATCH v2 07/12] ASoC: davinci-evm: Register machine level DAPM elements with the card Lars-Peter Clausen
2014-03-13 10:07 ` Peter Ujfalusi
2014-03-13 19:11 ` Mark Brown
2014-03-12 14:27 ` [PATCH v2 08/12] ASoC: snappercl15: Convert to table based DAPM setup Lars-Peter Clausen
2014-03-13 9:38 ` Mark Brown
2014-03-12 14:27 ` [PATCH v2 09/12] ASoC: s6105-ipcam: " Lars-Peter Clausen
2014-03-13 11:43 ` Mark Brown
2014-03-12 14:27 ` [PATCH v2 10/12] ASoC: pxa: magician: Convert to table based DAPM and control setup Lars-Peter Clausen
2014-03-13 9:41 ` Mark Brown
2014-03-12 14:27 ` [PATCH v2 11/12] ASoC: pxa: tosa: " Lars-Peter Clausen
2014-03-13 9:41 ` Mark Brown
2014-03-12 14:27 ` [PATCH v2 12/12] ASoC: Remove name_prefix unset during DAI link init hack Lars-Peter Clausen
2014-03-25 12:53 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394634460-15889-3-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=alsa-devel@alsa-project.org \
--cc=bcousson@baylibre.com \
--cc=broonie@kernel.org \
--cc=daniel-gl@gmx.net \
--cc=jarkko.nikula@bitmer.com \
--cc=lgirdwood@gmail.com \
--cc=peter.ujfalusi@ti.com \
--cc=rmallon@gmail.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox