Re: [PATCH 1/1] cris: fix %d confusingly prefixed with 0x in format string

Re: [PATCH 1/1] cris: fix %d confusingly prefixed with 0x in format string

[Joe Perches]

On Sat, 2014-08-02 at 15:20 -0700, Hans Wennborg wrote:
> Signed-off-by: Hans Wennborg <hans-7z9IcJk4adCsTnJN9+BGXg@public.gmane.org>
> ---
>  arch/cris/arch-v32/drivers/cryptocop.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
[]
> @@ -3155,7 +3155,7 @@ static void print_dma_descriptors(struct cryptocop_int_operation *iop)
>  	printk("print_dma_descriptors start\n");
>  
>  	printk("iop:\n");
> -	printk("\tsid: 0x%lld\n", iop->sid);
> +	printk("\tsid: 0x%llx\n", iop->sid);
>  
>  	printk("\tcdesc_out: 0x%p\n", iop->cdesc_out);
>  	printk("\tcdesc_in: 0x%p\n", iop->cdesc_in);

Thanks.

This is a surprisingly common error:

$ /usr/bin/git grep -P '0x\%(?!ull\b|ul\b|u\b|lu\b|llu\b|llux\b|lux\b|lx\b|lluX\b|luX\b|lX\b)[ul]*[ud]'
arch/arm/mach-omap2/id.c:               pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n",
arch/cris/arch-v32/drivers/cryptocop.c: printk("\tsid: 0x%lld\n", iop->sid);
drivers/atm/eni.c:                      return sprintf(page,"tx[%d]:    0x%ld-0x%ld "
drivers/atm/eni.c:                              length += sprintf(page+length,"0x%ld-0x%ld "
drivers/block/DAC960.c:         DAC960_Error("IO port 0x%d busy for Controller at\n",
drivers/block/DAC960.c:         DAC960_Error("IO port 0x%d busy for Controller at\n",
drivers/block/cciss.c:  dev_dbg(&h->pdev->dev, "   Max outstanding commands = 0x%d\n",
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:        mfc_debug(2, "stream buf addr: 0x%08lx, size: 0x%d\n",
drivers/mfd/htc-i2cpld.c:       snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%d", client->addr);
drivers/mfd/omap-usb-host.c:                     "USB HOST Rev:0x%d not recognized, assuming %d ports\n",
drivers/misc/sgi-gru/grumain.c: gru_dbg(grudev, "gid %d, gts %p, gms %p, ctxnum 0x%d, asidmap 0x%lx\n",
drivers/net/ethernet/smsc/smc911x.c:    DBG(SMC_DEBUG_MISC, dev, "phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%d\n",
drivers/net/wireless/ath/ath6kl/init.c:                            "found reserved ram size ie 0x%d\n",
drivers/net/wireless/ath/ath6kl/main.c:         ath6kl_err("failed to write 0x%x during diagnose window to 0x%d\n",
drivers/net/wireless/iwlegacy/4965-mac.c:                       IL_ERR("failed setting tx power (0x%d).\n", ret);
drivers/net/wireless/rtlwifi/pci.c:                              "more desc left, wake skb_queue@%d, ring->idx = %d, skb_queue_len = 0x%d\n",
drivers/net/wireless/rtlwifi/pci.c:                              "No more TX desc@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%d\n",
drivers/net/wireless/rtlwifi/pci.c:                      "less desc left, stop skb_queue@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%d\n",
drivers/net/wireless/rtlwifi/rtl8192de/phy.c:            "MCSTxPowerLevelOriginalOffset[%d][%d] = 0x%ulx\n",
drivers/net/wireless/rtlwifi/rtl8192de/phy.c:                   "ver 1 set RF-A, 5G,    0x28 = 0x%ulx !!\n", u4tmp);
drivers/net/wireless/rtlwifi/rtl8192de/phy.c:                   "ver 3 set RF-B, 2G, 0x28 = 0x%ulx !!\n", u4tmp);
drivers/net/wireless/rtlwifi/rtl8192de/phy.c:                   "ver 3 set RF-B, 2G, 0x28 = 0x%ulx !!\n",
drivers/parisc/dino.c:          printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%ld)!\n",
drivers/scsi/hpsa.c:    dev_info(dev, "   Max outstanding commands = 0x%d\n",
drivers/staging/nokia_h4p/nokia_core.c:         dev_err(info->dev, "Cannot get GPIO line 0x%d",
drivers/staging/rtl8192ee/pci.c:                                 ("more desc left, wake skb_queue@%d,ring->idx = %d, skb_queue_len = 0x%d\n",
drivers/staging/rtl8192ee/pci.c:                                 ("No more TX desc@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%d\n",
drivers/staging/rtl8192ee/pci.c:                         ("less desc left, stop skb_queue@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%d\n",
drivers/staging/rtl8821ae/pci.c:                                         "skb_queue_len = 0x%d\n",
drivers/staging/rtl8821ae/pci.c:                                  "idx = %d, skb_queue_len = 0x%d\n",
drivers/staging/rtl8821ae/pci.c:                          "idx = %d, skb_queue_len = 0x%d\n",
fs/cifs/cifs_debug.c:                                   "\n\tPathComponentMax: %d Status: 0x%d",
fs/cifs/misc.c:                 cifs_dbg(FYI, "notify err 0x%d\n",
fs/cifs/misc.c: cifs_dbg(FYI, "oplock type 0x%d level 0x%d\n",
fs/cifs/smb2misc.c:             cifs_dbg(FYI, "lease key match, lease break 0x%d\n",
fs/cifs/smb2misc.c:             cifs_dbg(FYI, "lease key match, lease break 0x%d\n",
fs/cifs/smb2misc.c:     cifs_dbg(FYI, "oplock level 0x%d\n", rsp->OplockLevel);
sound/firewire/fireworks/fireworks_proc.c:                          "phys in grp[0x%d]: type 0x%d, count 0x%d\n",
sound/firewire/fireworks/fireworks_proc.c:                          "phys out grps[0x%d]: type 0x%d, count 0x%d\n",
sound/pci/riptide/riptide.c:    snd_printdd("sent mixer %d: 0x%d 0x%d\n", num, rval, lval);
sound/pci/riptide/riptide.c:    snd_printdd("got mixer %d: 0x%d 0x%d\n", num, *rval, *lval);

Re: [PATCH 1/1] cris: fix %d confusingly prefixed with 0x in format string

[Hans Wennborg]

On 08/02/2014 05:46 PM, Joe Perches wrote:
> On Sat, 2014-08-02 at 15:20 -0700, Hans Wennborg wrote:
>> Signed-off-by: Hans Wennborg <hans@hanshq.net>
>> ---
>>   arch/cris/arch-v32/drivers/cryptocop.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
> []
>> @@ -3155,7 +3155,7 @@ static void print_dma_descriptors(struct cryptocop_int_operation *iop)
>>   	printk("print_dma_descriptors start\n");
>>
>>   	printk("iop:\n");
>> -	printk("\tsid: 0x%lld\n", iop->sid);
>> +	printk("\tsid: 0x%llx\n", iop->sid);
>>
>>   	printk("\tcdesc_out: 0x%p\n", iop->cdesc_out);
>>   	printk("\tcdesc_in: 0x%p\n", iop->cdesc_in);
>
> Thanks.
>
> This is a surprisingly common error:
>
> $ /usr/bin/git grep -P '0x\%(?!ull\b|ul\b|u\b|lu\b|llu\b|llux\b|lux\b|lx\b|lluX\b|luX\b|lX\b)[ul]*[ud]'
[...]

Yes, I have a patch for a bunch of these, but I figured it would be 
easier to get it merged if I split it up. (Complete kernel newbie here.)

  - Hans

Re: [PATCH 1/1] cris: fix %d confusingly prefixed with 0x in format string

[Steve French]

Thanks for pointing this out.  I fixed the instances of this that you
spotted in the cifs.ko driver (pushed to cifs-2.6.git for-next) and
noted that you pointed it out in the commit message.

http://git.samba.org/?p=sfrench/cifs-2.6.git;a=commit;h=59b04c5df75bd715002bb535930ae1982a739269



On Sat, Aug 2, 2014 at 7:46 PM, Joe Perches <joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org> wrote:
> On Sat, 2014-08-02 at 15:20 -0700, Hans Wennborg wrote:
>> Signed-off-by: Hans Wennborg <hans-7z9IcJk4adCsTnJN9+BGXg@public.gmane.org>
>> ---
>>  arch/cris/arch-v32/drivers/cryptocop.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
> []
>> @@ -3155,7 +3155,7 @@ static void print_dma_descriptors(struct cryptocop_int_operation *iop)
>>       printk("print_dma_descriptors start\n");
>>
>>       printk("iop:\n");
>> -     printk("\tsid: 0x%lld\n", iop->sid);
>> +     printk("\tsid: 0x%llx\n", iop->sid);
>>
>>       printk("\tcdesc_out: 0x%p\n", iop->cdesc_out);
>>       printk("\tcdesc_in: 0x%p\n", iop->cdesc_in);
>
> Thanks.
>
> This is a surprisingly common error:
>
> $ /usr/bin/git grep -P '0x\%(?!ull\b|ul\b|u\b|lu\b|llu\b|llux\b|lux\b|lx\b|lluX\b|luX\b|lX\b)[ul]*[ud]'
> arch/arm/mach-omap2/id.c:               pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n",
> arch/cris/arch-v32/drivers/cryptocop.c: printk("\tsid: 0x%lld\n", iop->sid);
> drivers/atm/eni.c:                      return sprintf(page,"tx[%d]:    0x%ld-0x%ld "
> drivers/atm/eni.c:                              length += sprintf(page+length,"0x%ld-0x%ld "
> drivers/block/DAC960.c:         DAC960_Error("IO port 0x%d busy for Controller at\n",
> drivers/block/DAC960.c:         DAC960_Error("IO port 0x%d busy for Controller at\n",
> drivers/block/cciss.c:  dev_dbg(&h->pdev->dev, "   Max outstanding commands = 0x%d\n",
> drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c:        mfc_debug(2, "stream buf addr: 0x%08lx, size: 0x%d\n",
> drivers/mfd/htc-i2cpld.c:       snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%d", client->addr);
> drivers/mfd/omap-usb-host.c:                     "USB HOST Rev:0x%d not recognized, assuming %d ports\n",
> drivers/misc/sgi-gru/grumain.c: gru_dbg(grudev, "gid %d, gts %p, gms %p, ctxnum 0x%d, asidmap 0x%lx\n",
> drivers/net/ethernet/smsc/smc911x.c:    DBG(SMC_DEBUG_MISC, dev, "phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%d\n",
> drivers/net/wireless/ath/ath6kl/init.c:                            "found reserved ram size ie 0x%d\n",
> drivers/net/wireless/ath/ath6kl/main.c:         ath6kl_err("failed to write 0x%x during diagnose window to 0x%d\n",
> drivers/net/wireless/iwlegacy/4965-mac.c:                       IL_ERR("failed setting tx power (0x%d).\n", ret);
> drivers/net/wireless/rtlwifi/pci.c:                              "more desc left, wake skb_queue@%d, ring->idx = %d, skb_queue_len = 0x%d\n",
> drivers/net/wireless/rtlwifi/pci.c:                              "No more TX desc@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%d\n",
> drivers/net/wireless/rtlwifi/pci.c:                      "less desc left, stop skb_queue@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%d\n",
> drivers/net/wireless/rtlwifi/rtl8192de/phy.c:            "MCSTxPowerLevelOriginalOffset[%d][%d] = 0x%ulx\n",
> drivers/net/wireless/rtlwifi/rtl8192de/phy.c:                   "ver 1 set RF-A, 5G,    0x28 = 0x%ulx !!\n", u4tmp);
> drivers/net/wireless/rtlwifi/rtl8192de/phy.c:                   "ver 3 set RF-B, 2G, 0x28 = 0x%ulx !!\n", u4tmp);
> drivers/net/wireless/rtlwifi/rtl8192de/phy.c:                   "ver 3 set RF-B, 2G, 0x28 = 0x%ulx !!\n",
> drivers/parisc/dino.c:          printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%ld)!\n",
> drivers/scsi/hpsa.c:    dev_info(dev, "   Max outstanding commands = 0x%d\n",
> drivers/staging/nokia_h4p/nokia_core.c:         dev_err(info->dev, "Cannot get GPIO line 0x%d",
> drivers/staging/rtl8192ee/pci.c:                                 ("more desc left, wake skb_queue@%d,ring->idx = %d, skb_queue_len = 0x%d\n",
> drivers/staging/rtl8192ee/pci.c:                                 ("No more TX desc@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%d\n",
> drivers/staging/rtl8192ee/pci.c:                         ("less desc left, stop skb_queue@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%d\n",
> drivers/staging/rtl8821ae/pci.c:                                         "skb_queue_len = 0x%d\n",
> drivers/staging/rtl8821ae/pci.c:                                  "idx = %d, skb_queue_len = 0x%d\n",
> drivers/staging/rtl8821ae/pci.c:                          "idx = %d, skb_queue_len = 0x%d\n",
> fs/cifs/cifs_debug.c:                                   "\n\tPathComponentMax: %d Status: 0x%d",
> fs/cifs/misc.c:                 cifs_dbg(FYI, "notify err 0x%d\n",
> fs/cifs/misc.c: cifs_dbg(FYI, "oplock type 0x%d level 0x%d\n",
> fs/cifs/smb2misc.c:             cifs_dbg(FYI, "lease key match, lease break 0x%d\n",
> fs/cifs/smb2misc.c:             cifs_dbg(FYI, "lease key match, lease break 0x%d\n",
> fs/cifs/smb2misc.c:     cifs_dbg(FYI, "oplock level 0x%d\n", rsp->OplockLevel);
> sound/firewire/fireworks/fireworks_proc.c:                          "phys in grp[0x%d]: type 0x%d, count 0x%d\n",
> sound/firewire/fireworks/fireworks_proc.c:                          "phys out grps[0x%d]: type 0x%d, count 0x%d\n",
> sound/pci/riptide/riptide.c:    snd_printdd("sent mixer %d: 0x%d 0x%d\n", num, rval, lval);
> sound/pci/riptide/riptide.c:    snd_printdd("got mixer %d: 0x%d 0x%d\n", num, *rval, *lval);
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-cifs" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Thanks,

Steve

Re: [PATCH 1/1] cris: fix %d confusingly prefixed with 0x in format string

[Joe Perches]

On Sat, 2014-08-02 at 18:19 -0700, Hans Wennborg wrote:
> Yes, I have a patch for a bunch of these, but I figured it would be 
> easier to get it merged if I split it up. (Complete kernel newbie here.)

You as a kernel newbie did good, thanks.

A small tip would be to do all of them in a single series
cc'ing each individual patch to the appropriate maintainers
and mailing lists.

cheers, Joe

Re: [PATCH 1/1] cris: fix %d confusingly prefixed with 0x in format string

[Hans Wennborg]

On 08/02/2014 11:10 PM, Joe Perches wrote:
> On Sat, 2014-08-02 at 18:19 -0700, Hans Wennborg wrote:
>> Yes, I have a patch for a bunch of these, but I figured it would be
>> easier to get it merged if I split it up. (Complete kernel newbie here.)
>
> You as a kernel newbie did good, thanks.
>
> A small tip would be to do all of them in a single series
> cc'ing each individual patch to the appropriate maintainers
> and mailing lists.

Thanks for the advice! I have split up and sent out the big patch as a 
series, with hopefully the right folks CC'd.

  - Hans

Re: [PATCH 1/1] cris: fix %d confusingly prefixed with 0x in format string

[Joe Perches]

On Sun, 2014-08-03 at 17:25 -0700, Hans Wennborg wrote:
> On 08/02/2014 11:10 PM, Joe Perches wrote:
> > On Sat, 2014-08-02 at 18:19 -0700, Hans Wennborg wrote:
> >> Yes, I have a patch for a bunch of these, but I figured it would be
> >> easier to get it merged if I split it up. (Complete kernel newbie here.)
> >
> > You as a kernel newbie did good, thanks.
> >
> > A small tip would be to do all of them in a single series
> > cc'ing each individual patch to the appropriate maintainers
> > and mailing lists.
> 
> Thanks for the advice! I have split up and sent out the big patch as a 
> series, with hopefully the right folks CC'd.

Another nice thing to do is to use git format-patch --cover-letter
so that you can use a [PATCH 0/n] introductory description too.

Other than that, nice job, thanks.

Perhaps now you can do the "0x%u" variants.

$ /usr/bin/git grep -P '0x\%(?!ullx\b|ullX\b|llux\b|lux\b|ulx\b|ulX\b|lx\b|lluX\b|luX\b|lX\b)[ul]*[u]'
drivers/iommu/arm-smmu.c:                                   "Unexpected context fault (fsr 0x%u)\n",
drivers/net/vmxnet3/vmxnet3_drv.c:                              "txd[%u]: 0x%llu %u %u\n",
drivers/net/wireless/mwifiex/cfg80211.c:                wiphy_dbg(wiphy, "info: ongoing ROC, cookie = 0x%llu\n",
drivers/pinctrl/pinctrl-at91.c:         dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lu\n",
drivers/pinctrl/pinctrl-at91.c:         dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lu\n",
drivers/scsi/cxgbi/libcxgbi.c:          "csk 0x%p,%u,0x%lu,%u, seq %u, wup %u, thre %u, %u.\n",
drivers/scsi/qla2xxx/qla_target.c:          "dif check TGT cdb 0x%x lba 0x%llu: [Actual|Expected] Ref Tag[0x%x|0x%x], App Tag [0x%x|0x%x], Guard [0x%x|0x%x]\n",
drivers/usb/musb/ux500_dma.c:           "packet_sz=%d, mode=%d, dma_addr=0x%llu, len=%d is_tx=%d\n",
fs/exofs/dir.c:         "offset=%lu, inode=0x%llu, rec_len=%d, name_len=%d\n",
fs/xfs/xfs_discard.c:    "discard failed for extent [0x%llu,%u], error %d",
sound/soc/atmel/atmel_ssc_dai.c:        pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n",

There are some more with specific format lengths too:

arch/sparc/kernel/smp_32.c:             printk(KERN_NOTICE "No MID found for CPU%d at node 0x%08d", id, cpu_node);
drivers/mfd/rtsx_usb.c: dev_dbg(&intf->dev, "%s called with pm message 0x%04u\n",
drivers/net/wireless/rtlwifi/rtl8192de/fw.c:             "Polling FW ready fail!! REG_MCUFWDL:0x%08ul\n",
drivers/tty/moxa.c:                     printk(KERN_INFO "MOXA isa board found at 0x%.8lu and "

cheers, Joe