From: Lars-Peter Clausen <lars@metafoo.de>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org, Lars-Peter Clausen <lars@metafoo.de>,
Lee Jones <lee.jones@linaro.org>
Subject: [PATCH] ASoC: ab8500-codec: Revert back to regmap
Date: Mon, 25 Aug 2014 10:20:44 +0200 [thread overview]
Message-ID: <1408954845-19022-1-git-send-email-lars@metafoo.de> (raw)
Commit ff795d614bfa ("ASoC: ab8500: Convert register I/O to regmap")
initially converted the ab8500 CODEC driver to use regmap rather than
legacy ASoC IO. This was reverted though in commit 63e6d43bf80d ("ASoC:
ab8500: Revert to using custom I/O functions") since the inital conversion
was not working properly. This was presumebly because the SOC_SINGLE_XR_SX
controls, which are used by this driver, did not properly support regmap at
that point. This has since been fixed in commit 6137a5ca326d ("ASoC: Prepare
SOC_SINGLE_XR_SX controls for regmap"). So revert back to regmap again.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
I don't have the hardware, so I haven't been able to verify that it actually
works now, but I think there is a very good chance. Lee, do you have access
to a Snowball board and can give this a test?
---
sound/soc/codecs/ab8500-codec.c | 62 +++++++++++++++++++----------------------
1 file changed, 28 insertions(+), 34 deletions(-)
diff --git a/sound/soc/codecs/ab8500-codec.c b/sound/soc/codecs/ab8500-codec.c
index 62cf231..fd43827 100644
--- a/sound/soc/codecs/ab8500-codec.c
+++ b/sound/soc/codecs/ab8500-codec.c
@@ -125,6 +125,8 @@ struct ab8500_codec_drvdata_dbg {
/* Private data for AB8500 device-driver */
struct ab8500_codec_drvdata {
+ struct regmap *regmap;
+
/* Sidetone */
long *sid_fir_values;
enum sid_state sid_status;
@@ -165,49 +167,35 @@ static inline const char *amic_type_str(enum amic_type type)
*/
/* Read a register from the audio-bank of AB8500 */
-static unsigned int ab8500_codec_read_reg(struct snd_soc_codec *codec,
- unsigned int reg)
+static int ab8500_codec_read_reg(void *context, unsigned int reg,
+ unsigned int *value)
{
+ struct device *dev = context;
int status;
- unsigned int value = 0;
u8 value8;
- status = abx500_get_register_interruptible(codec->dev, AB8500_AUDIO,
- reg, &value8);
- if (status < 0) {
- dev_err(codec->dev,
- "%s: ERROR: Register (0x%02x:0x%02x) read failed (%d).\n",
- __func__, (u8)AB8500_AUDIO, (u8)reg, status);
- } else {
- dev_dbg(codec->dev,
- "%s: Read 0x%02x from register 0x%02x:0x%02x\n",
- __func__, value8, (u8)AB8500_AUDIO, (u8)reg);
- value = (unsigned int)value8;
- }
+ status = abx500_get_register_interruptible(dev, AB8500_AUDIO,
+ reg, &value8);
+ *value = (unsigned int)value8;
- return value;
+ return status;
}
/* Write to a register in the audio-bank of AB8500 */
-static int ab8500_codec_write_reg(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
+static int ab8500_codec_write_reg(void *context, unsigned int reg,
+ unsigned int value)
{
- int status;
-
- status = abx500_set_register_interruptible(codec->dev, AB8500_AUDIO,
- reg, value);
- if (status < 0)
- dev_err(codec->dev,
- "%s: ERROR: Register (%02x:%02x) write failed (%d).\n",
- __func__, (u8)AB8500_AUDIO, (u8)reg, status);
- else
- dev_dbg(codec->dev,
- "%s: Wrote 0x%02x into register %02x:%02x\n",
- __func__, (u8)value, (u8)AB8500_AUDIO, (u8)reg);
+ struct device *dev = context;
- return status;
+ return abx500_set_register_interruptible(dev, AB8500_AUDIO,
+ reg, value);
}
+static const struct regmap_config ab8500_codec_regmap = {
+ .reg_read = ab8500_codec_read_reg,
+ .reg_write = ab8500_codec_write_reg,
+};
+
/*
* Controls - DAPM
*/
@@ -2564,9 +2552,6 @@ static int ab8500_codec_probe(struct snd_soc_codec *codec)
static struct snd_soc_codec_driver ab8500_codec_driver = {
.probe = ab8500_codec_probe,
- .read = ab8500_codec_read_reg,
- .write = ab8500_codec_write_reg,
- .reg_word_size = sizeof(u8),
.controls = ab8500_ctrls,
.num_controls = ARRAY_SIZE(ab8500_ctrls),
.dapm_widgets = ab8500_dapm_widgets,
@@ -2591,6 +2576,15 @@ static int ab8500_codec_driver_probe(struct platform_device *pdev)
drvdata->anc_status = ANC_UNCONFIGURED;
dev_set_drvdata(&pdev->dev, drvdata);
+ drvdata->regmap = devm_regmap_init(&pdev->dev, NULL, &pdev->dev,
+ &ab8500_codec_regmap);
+ if (IS_ERR(drvdata->regmap)) {
+ status = PTR_ERR(drvdata->regmap);
+ dev_err(&pdev->dev, "%s: Failed to allocate regmap: %d\n",
+ __func__, status);
+ return status;
+ }
+
dev_dbg(&pdev->dev, "%s: Register codec.\n", __func__);
status = snd_soc_register_codec(&pdev->dev, &ab8500_codec_driver,
ab8500_codec_dai,
--
1.8.0
next reply other threads:[~2014-08-25 8:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-25 8:20 Lars-Peter Clausen [this message]
2014-09-01 16:59 ` [PATCH] ASoC: ab8500-codec: Revert back to regmap Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408954845-19022-1-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).