alsa-devel.alsa-project.org archive mirror
 help / color / mirror / Atom feed
From: Xavier Hsu <xavier.hsu@linaro.org>
To: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
	patches@linaro.org
Cc: Xavier Hsu <xavier.hsu@linaro.org>,
	ckeepax@opensource.wolfsonmicro.com, lars@metafoo.de,
	Andy Green <andy.green@linaro.org>
Subject: [PATCHv3 4/9] Improve wm8971_set_dai_fmt
Date: Tue,  2 Sep 2014 11:30:43 +0800	[thread overview]
Message-ID: <1409628648-13732-4-git-send-email-xavier.hsu@linaro.org> (raw)
In-Reply-To: <1409628648-13732-1-git-send-email-xavier.hsu@linaro.org>

This patch improves WM8971.
We modify the function of wm8971_set_dai_fmt().

Any comments about improving the patch are welcome.
Thanks.

Signed-off-by: Xavier Hsu <xavier.hsu@linaro.org>
Signed-off-by: Andy Green <andy.green@linaro.org>
---
 sound/soc/codecs/wm8971.c |   18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index 7c2b175..64ed226 100755
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -550,12 +550,11 @@ static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
 			      unsigned int fmt)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
-	u16 iface = 0;
 
 	/* set master/slave audio interface */
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 	case SND_SOC_DAIFMT_CBM_CFM:
-		iface = 0x0040;
+		snd_soc_update_bits(codec, WM8971_IFACE, 0x0040, 0x0040);
 		break;
 	case SND_SOC_DAIFMT_CBS_CFS:
 		break;
@@ -566,18 +565,18 @@ static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	/* interface format */
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
-		iface |= 0x0002;
+		snd_soc_update_bits(codec, WM8971_IFACE, 0x0002, 0x0002);
 		break;
 	case SND_SOC_DAIFMT_RIGHT_J:
 		break;
 	case SND_SOC_DAIFMT_LEFT_J:
-		iface |= 0x0001;
+		snd_soc_update_bits(codec, WM8971_IFACE, 0x0001, 0x0001);
 		break;
 	case SND_SOC_DAIFMT_DSP_A:
-		iface |= 0x0003;
+		snd_soc_update_bits(codec, WM8971_IFACE, 0x0003, 0x0003);
 		break;
 	case SND_SOC_DAIFMT_DSP_B:
-		iface |= 0x0013;
+		snd_soc_update_bits(codec, WM8971_IFACE, 0x0013, 0x0013);
 		break;
 	default:
 		return -EINVAL;
@@ -588,19 +587,18 @@ static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	case SND_SOC_DAIFMT_NB_NF:
 		break;
 	case SND_SOC_DAIFMT_IB_IF:
-		iface |= 0x0090;
+		snd_soc_update_bits(codec, WM8971_IFACE, 0x0090, 0x0090);
 		break;
 	case SND_SOC_DAIFMT_IB_NF:
-		iface |= 0x0080;
+		snd_soc_update_bits(codec, WM8971_IFACE, 0x0080, 0x0080);
 		break;
 	case SND_SOC_DAIFMT_NB_IF:
-		iface |= 0x0010;
+		snd_soc_update_bits(codec, WM8971_IFACE, 0x0010, 0x0010);
 		break;
 	default:
 		return -EINVAL;
 	}
 
-	snd_soc_write(codec, WM8971_IFACE, iface);
 	return 0;
 }
 
-- 
1.7.9.5

  parent reply	other threads:[~2014-09-02  3:30 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-02  3:30 [PATCHv3 1/9] Clean WM8971 through checkpatch Xavier Hsu
2014-09-02  3:30 ` [PATCHv3 2/9] WM8971 uses SOC_ENUM_SINGLE_DECL to replace SOC_ENUM_SINGLE Xavier Hsu
2014-09-02  3:30 ` [PATCHv3 3/9] WM8971 uses TLV information Xavier Hsu
2014-09-02  3:30 ` Xavier Hsu [this message]
2014-09-02  3:30 ` [PATCHv3 5/9] Using the constraint based on wm8971_set_dai_sysclk Xavier Hsu
2014-09-02  3:30 ` [PATCHv3 6/9] WM8971 uses msleep to replace work queue Xavier Hsu
2014-09-02  3:30 ` [PATCHv3 7/9] WM8971 improves the function of regmap Xavier Hsu
2014-09-02  3:30 ` [PATCHv3 8/9] WM8971 adds kcontrol functions Xavier Hsu
2014-09-02  3:30 ` [PATCHv3 9/9] ASOC add WM8973 support to WM8971 Xavier Hsu
  -- strict thread matches above, loose matches on Subject: below --
2014-09-02  3:27 [PATCHv3 1/9] Clean WM8971 through checkpatch Xavier Hsu
2014-09-02  3:27 ` [PATCHv3 4/9] Improve wm8971_set_dai_fmt Xavier Hsu
2014-09-02  9:48   ` Charles Keepax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1409628648-13732-4-git-send-email-xavier.hsu@linaro.org \
    --to=xavier.hsu@linaro.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=andy.green@linaro.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=lars@metafoo.de \
    --cc=patches@linaro.org \
    --cc=patches@opensource.wolfsonmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).