From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org, alsa-devel@alsa-project.org,
Takashi Iwai <tiwai@suse.de>
Subject: [PATCH 4/5] ALSA: hda: add component support
Date: Mon, 8 Dec 2014 18:42:08 +0200 [thread overview]
Message-ID: <1418056929-7977-5-git-send-email-imre.deak@intel.com> (raw)
In-Reply-To: <1418056929-7977-1-git-send-email-imre.deak@intel.com>
Register a component to be used to interface with the i915 driver. This
is meant to replace the current interface which is based on module
symbol lookups.
Note that currently we keep the existing behavior and pin the i915
module while the hda driver is loaded. Using the component interface
allows us to remove this dependency once support for dynamically
enabling / disabling the HDMI functionality from the bind/unbind hooks
is added.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
sound/pci/hda/hda_i915.c | 120 ++++++++++++++++++++++++++++++++---------------
sound/pci/hda/hda_priv.h | 7 +++
2 files changed, 89 insertions(+), 38 deletions(-)
diff --git a/sound/pci/hda/hda_i915.c b/sound/pci/hda/hda_i915.c
index 4e4b733..01f5a5d 100644
--- a/sound/pci/hda/hda_i915.c
+++ b/sound/pci/hda/hda_i915.c
@@ -18,8 +18,10 @@
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/component.h>
+#include <drm/i915_component.h>
#include <sound/core.h>
-#include <drm/i915_powerwell.h>
#include "hda_priv.h"
#include "hda_i915.h"
@@ -31,32 +33,33 @@
#define AZX_REG_EM4 0x100c
#define AZX_REG_EM5 0x1010
-static int (*get_power)(void);
-static int (*put_power)(void);
-static int (*get_cdclk)(void);
-
int hda_display_power(struct azx *chip, bool enable)
{
- if (!get_power || !put_power)
+ struct hda_component *hdac = &chip->component;
+
+ if (!hdac->i915_ops)
return -ENODEV;
pr_debug("HDA display power %s \n",
enable ? "Enable" : "Disable");
if (enable)
- return get_power();
+ hdac->i915_ops->get_power(hdac->i915_dev);
else
- return put_power();
+ hdac->i915_ops->put_power(hdac->i915_dev);
+
+ return 0;
}
void haswell_set_bclk(struct azx *chip)
{
int cdclk_freq;
unsigned int bclk_m, bclk_n;
+ struct hda_component *hdac = &chip->component;
- if (!get_cdclk)
+ if (!hdac->i915_ops)
return;
- cdclk_freq = get_cdclk();
+ cdclk_freq = hdac->i915_ops->get_cdclk(hdac->i915_dev);
switch (cdclk_freq) {
case 337500:
bclk_m = 16;
@@ -84,47 +87,87 @@ void haswell_set_bclk(struct azx *chip)
azx_writew(chip, EM5, bclk_n);
}
+static int hda_component_bind(struct device *hda_dev,
+ struct device *i915_dev, void *data)
+{
+ struct snd_card *card = dev_get_drvdata(hda_dev);
+ struct azx *chip = card->private_data;
+ struct i915_component_ops *i915_ops = data;
+ struct hda_component *hdac = &chip->component;
+
+ if (WARN_ON(!(i915_ops->get_power && i915_ops->put_power &&
+ i915_ops->get_cdclk)))
+ return -EINVAL;
+
+ /*
+ * Atm, we don't support dynamic unbinding initiated by the component
+ * master, so pin its containing module until we unbind.
+ */
+ if (!try_module_get(i915_ops->owner))
+ return -ENODEV;
+
+ hdac->i915_dev = i915_dev;
+ hdac->i915_ops = i915_ops;
+
+ return 0;
+}
+
+static void hda_component_unbind(struct device *hda_dev,
+ struct device *i915_dev, void *data)
+{
+ struct snd_card *card = dev_get_drvdata(hda_dev);
+ struct azx *chip = card->private_data;
+ struct hda_component *hdac = &chip->component;
+
+ module_put(hdac->i915_ops->owner);
+
+ hdac->i915_dev = NULL;
+ hdac->i915_ops = NULL;
+}
+
+static struct component_ops hda_component_ops = {
+ .bind = hda_component_bind,
+ .unbind = hda_component_unbind,
+};
int hda_i915_init(struct azx *chip)
{
- int err = 0;
+ struct device *dev = &chip->pci->dev;
+ int ret;
- get_power = symbol_request(i915_request_power_well);
- if (!get_power) {
- pr_warn("hda-i915: get_power symbol get fail\n");
- return -ENODEV;
- }
-
- put_power = symbol_request(i915_release_power_well);
- if (!put_power) {
- symbol_put(i915_request_power_well);
- get_power = NULL;
- return -ENODEV;
- }
-
- get_cdclk = symbol_request(i915_get_cdclk_freq);
- if (!get_cdclk) /* may have abnormal BCLK and audio playback rate */
- pr_warn("hda-i915: get_cdclk symbol get fail\n");
-
+ ret = component_add(dev, &hda_component_ops);
+ if (ret < 0)
+ goto out_err;
+
+ /*
+ * Atm, we don't support deferring the component binding, so make sure
+ * i915 is loaded and that the binding successfully completes.
+ */
+ ret = request_module("i915");
+ if (ret < 0)
+ goto out_err;
+
+ if (!chip->component.i915_ops) {
+ ret = -ENODEV;
+ goto out_component_del;
+ }
+
- pr_debug("HDA driver get symbol successfully from i915 module\n");
+ pr_debug("hda-i915: bound to component master\n");
+
+ return 0;
+out_component_del:
+ component_del(dev, &hda_component_ops);
+out_err:
+ pr_warn("hda-i915: failed to bind to component master (%d)\n", ret);
- return err;
+ return ret;
}
int hda_i915_exit(struct azx *chip)
{
- if (get_power) {
- symbol_put(i915_request_power_well);
- get_power = NULL;
- }
- if (put_power) {
- symbol_put(i915_release_power_well);
- put_power = NULL;
- }
- if (get_cdclk) {
- symbol_put(i915_get_cdclk_freq);
- get_cdclk = NULL;
- }
+ struct device *dev = &chip->pci->dev;
+
+ component_del(dev, &hda_component_ops);
return 0;
}
diff --git a/sound/pci/hda/hda_priv.h b/sound/pci/hda/hda_priv.h
index aa484fd..336d401 100644
--- a/sound/pci/hda/hda_priv.h
+++ b/sound/pci/hda/hda_priv.h
@@ -18,6 +18,7 @@
#include <linux/clocksource.h>
#include <sound/core.h>
#include <sound/pcm.h>
+#include <drm/i915_component.h>
/*
* registers
@@ -291,6 +292,12 @@ struct azx {
struct pci_dev *pci;
int dev_index;
+ /* i915 component interface */
+ struct hda_component {
+ struct device *i915_dev;
+ const struct i915_component_ops *i915_ops;
+ } component;
+
/* chip type specific */
int driver_type;
unsigned int driver_caps;
--
1.8.4
next prev parent reply other threads:[~2014-12-08 16:44 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-08 16:42 [PATCH 0/5] sanitize hda/i915 interface using the component fw Imre Deak
2014-12-08 16:42 ` [PATCH 1/5] drm/i915: add dev_to_i915_priv helper Imre Deak
2014-12-08 18:36 ` Jani Nikula
2014-12-08 19:54 ` Imre Deak
2014-12-08 20:27 ` Daniel Vetter
2014-12-08 20:40 ` Chris Wilson
2014-12-08 21:26 ` Imre Deak
2014-12-09 9:41 ` [PATCH v2 1/5] drm/i915: add dev_to_i915 helper Imre Deak
2014-12-09 10:08 ` Daniel Vetter
2014-12-09 16:15 ` [PATCH v3 " Imre Deak
2014-12-08 16:42 ` [PATCH 2/5] drm/i915: add component support Imre Deak
2014-12-08 18:44 ` Jani Nikula
2014-12-08 20:23 ` Imre Deak
2014-12-09 9:41 ` [PATCH v2 " Imre Deak
2014-12-09 10:12 ` Daniel Vetter
2014-12-09 10:33 ` Jani Nikula
2014-12-10 9:24 ` Daniel Vetter
2014-12-09 16:15 ` [PATCH v3 " Imre Deak
2014-12-10 8:22 ` Jani Nikula
2014-12-10 13:18 ` Imre Deak
2014-12-08 16:42 ` [PATCH 3/5] ALSA: hda: pass chip to all i915 interface functions Imre Deak
2014-12-08 16:42 ` Imre Deak [this message]
2014-12-09 9:41 ` [PATCH v2 4/5] ALSA: hda: add component support Imre Deak
2014-12-09 10:19 ` Daniel Vetter
2014-12-09 17:30 ` Takashi Iwai
2014-12-10 9:27 ` Daniel Vetter
2014-12-09 16:15 ` [PATCH v3 " Imre Deak
2014-12-08 16:42 ` [PATCH 5/5] drm/i915: remove unused power_well/get_cdclk_freq api Imre Deak
2014-12-08 18:46 ` Jani Nikula
2014-12-08 20:14 ` [PATCH 0/5] sanitize hda/i915 interface using the component fw Daniel Vetter
2014-12-09 8:59 ` Imre Deak
2014-12-09 10:03 ` Daniel Vetter
2014-12-09 16:56 ` Imre Deak
2014-12-09 17:33 ` Takashi Iwai
2015-01-05 15:29 ` Imre Deak
2015-01-05 15:35 ` Takashi Iwai
2015-01-05 17:25 ` Imre Deak
2015-01-06 10:25 ` Takashi Iwai
2015-01-07 19:49 ` Imre Deak
2015-01-08 14:35 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418056929-7977-5-git-send-email-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox