From: Lars-Peter Clausen <lars@metafoo.de>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
alsa-devel@alsa-project.org, Lars-Peter Clausen <lars@metafoo.de>,
Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>,
Sangbeom Kim <sbkim73@samsung.com>,
Denis Carikli <denis@eukrea.com>,
Manuel Lauss <manuel.lauss@googlemail.com>,
Bo Shen <voice.shen@atmel.com>, Shawn Guo <shawn.guo@linaro.org>,
Guennadi Liakhovetski <g.liakhovetski@gmx.de>,
Daniel Mack <daniel@zonque.org>
Subject: [PATCH 00/21] ASoC: Use static DAI format setup
Date: Thu, 1 Jan 2015 17:16:09 +0100 [thread overview]
Message-ID: <1420128990-6872-1-git-send-email-lars@metafoo.de> (raw)
There is still a rather large amount of board driver which manually call
snd_soc_dai_set_fmt() for both the CPU and the CODEC DAI, while pretty much
all of them can use static DAI setup by setting the dai_fmt field in the
snd_soc_dai_link struct.
Using the later method results in shorter and cleaner code and will also
make it easier to eventually switch to a component type independent way to
specify the clock master/slave settings (Right now the meaning of the value
depends on whether a DAI belongs to a CODEC or not).
This series converts all the trivial cases of snd_soc_dai_set_fmt() users to
use the dai_fmt field instead.
- Lars
Lars-Peter Clausen (21):
ASoC: sam9g20_wm8731: Use static DAI format setup
ASoC: db1200: Use static DAI format setup
ASoC: eureka-tlv320: Use static DAI format setup
ASoC: mx27vis-aci32x4: Use static DAI format setup
ASoC: wm1133-ev1: Use static DAI format setup
ASoC: mxs-sgtl5000: Use static DAI format setup
ASoC: ams-delta: Use static DAI format setup
ASoC: raumfeld: Use static DAI format setup
ASoC: zylonite: Use static DAI format setup
ASoC: goni_wm8994: Use static DAI format setup
ASoC: h1940_uda1380: Use static DAI format setup
ASoC: jive_wm8750: Use static DAI format setup
ASoC: neo1973_wm8753: Use static DAI format setup
ASoC: rx1950_uda1380: Use static DAI format setup
ASoC: s3c24xx_simtec: Use static DAI format setup
ASoC: s3c24xx_uda134x: Use static DAI format setup
ASoC: smartq_wm8987: Use static DAI format setup
ASoC: smdk_wm8580: Use static DAI format setup
ASoC: smdk_wm8570pcm: Use static DAI format setup
ASoC: smdk_wm8994pcm: Use static DAI format setup
ASoC: migor: Use static DAI format setup
sound/soc/atmel/sam9g20_wm8731.c | 30 ++----------------------------
sound/soc/au1x/db1200.c | 19 +++----------------
sound/soc/fsl/eukrea-tlv320.c | 21 ++-------------------
sound/soc/fsl/mx27vis-aic32x4.c | 12 ++----------
sound/soc/fsl/wm1133-ev1.c | 12 ++----------
sound/soc/mxs/mxs-sgtl5000.c | 27 ++++++---------------------
sound/soc/omap/ams-delta.c | 18 +++---------------
sound/soc/pxa/raumfeld.c | 35 ++++++++---------------------------
sound/soc/pxa/zylonite.c | 12 ++----------
sound/soc/samsung/goni_wm8994.c | 23 ++++-------------------
sound/soc/samsung/h1940_uda1380.c | 15 ++-------------
sound/soc/samsung/jive_wm8750.c | 16 ++--------------
sound/soc/samsung/neo1973_wm8753.c | 25 ++++---------------------
sound/soc/samsung/rx1950_uda1380.c | 15 ++-------------
sound/soc/samsung/s3c24xx_simtec.c | 20 ++------------------
sound/soc/samsung/s3c24xx_uda134x.c | 12 ++----------
sound/soc/samsung/smartq_wm8987.c | 16 ++--------------
sound/soc/samsung/smdk_wm8580.c | 21 ++++++---------------
sound/soc/samsung/smdk_wm8580pcm.c | 19 +++++--------------
sound/soc/samsung/smdk_wm8994pcm.c | 16 ++--------------
sound/soc/sh/migor.c | 12 ++----------
21 files changed, 65 insertions(+), 331 deletions(-)
--
1.8.0
next reply other threads:[~2015-01-01 16:16 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-01 16:16 Lars-Peter Clausen [this message]
2015-01-01 16:16 ` [PATCH 01/21] ASoC: sam9g20_wm8731: Use static DAI format setup Lars-Peter Clausen
2015-01-04 1:11 ` Bo Shen
2015-01-01 16:16 ` [PATCH 02/21] ASoC: db1200: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 03/21] ASoC: eureka-tlv320: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 04/21] ASoC: mx27vis-aci32x4: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 05/21] ASoC: wm1133-ev1: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 06/21] ASoC: mxs-sgtl5000: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 07/21] ASoC: ams-delta: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 08/21] ASoC: raumfeld: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 09/21] ASoC: zylonite: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 10/21] ASoC: goni_wm8994: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 11/21] ASoC: h1940_uda1380: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 12/21] ASoC: jive_wm8750: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 13/21] ASoC: neo1973_wm8753: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 14/21] ASoC: rx1950_uda1380: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 15/21] ASoC: s3c24xx_simtec: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 16/21] ASoC: s3c24xx_uda134x: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 17/21] ASoC: smartq_wm8987: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 18/21] ASoC: smdk_wm8580: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 19/21] ASoC: smdk_wm8570pcm: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 20/21] ASoC: smdk_wm8994pcm: " Lars-Peter Clausen
2015-01-01 16:16 ` [PATCH 21/21] ASoC: migor: " Lars-Peter Clausen
2015-01-06 17:34 ` [PATCH 00/21] ASoC: " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1420128990-6872-1-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=daniel@zonque.org \
--cc=denis@eukrea.com \
--cc=fabio.estevam@freescale.com \
--cc=g.liakhovetski@gmx.de \
--cc=jkrzyszt@tis.icnet.pl \
--cc=lgirdwood@gmail.com \
--cc=manuel.lauss@googlemail.com \
--cc=sbkim73@samsung.com \
--cc=shawn.guo@linaro.org \
--cc=voice.shen@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).