From: "Thomas Niederprüm" <niederp@physik.uni-kl.de>
To: broonie@kernel.org, zonque@gmail.com, brandau@gmx.de, lars@metafoo.de
Cc: alsa-devel@alsa-project.org,
"Thomas Niederprüm" <niederp@physik.uni-kl.de>
Subject: [PATCH 04/10] ASoC: sta32x: add status register.
Date: Thu, 22 Jan 2015 00:01:56 +0100 [thread overview]
Message-ID: <1421881322-27806-5-git-send-email-niederp@physik.uni-kl.de> (raw)
In-Reply-To: <1421881322-27806-1-git-send-email-niederp@physik.uni-kl.de>
The sta32x defines a read-only status register at address 0x2d.
Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
---
sound/soc/codecs/sta32x.c | 5 +++--
sound/soc/codecs/sta32x.h | 2 +-
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c
index d2f6bed..77be160 100644
--- a/sound/soc/codecs/sta32x.c
+++ b/sound/soc/codecs/sta32x.c
@@ -101,6 +101,7 @@ static const struct reg_default sta32x_regs[] = {
{ 0x28, 0xc0 },
{ 0x2b, 0x00 },
{ 0x2c, 0x0c },
+ { 0x2d, 0x0f },
};
static const struct regmap_range sta32x_write_regs_range[] = {
@@ -110,7 +111,7 @@ static const struct regmap_range sta32x_write_regs_range[] = {
static const struct regmap_range sta32x_read_regs_range[] = {
regmap_reg_range(STA32X_CONFA, STA32X_AUTO2),
- regmap_reg_range(STA32X_C1CFG, STA32X_FDRC2),
+ regmap_reg_range(STA32X_C1CFG, STA32X_STATUS),
};
static const struct regmap_range sta32x_volatile_regs_range[] = {
@@ -1011,7 +1012,7 @@ static const struct snd_soc_codec_driver sta32x_codec = {
static const struct regmap_config sta32x_regmap = {
.reg_bits = 8,
.val_bits = 8,
- .max_register = STA32X_FDRC2,
+ .max_register = STA32X_STATUS,
.reg_defaults = sta32x_regs,
.num_reg_defaults = ARRAY_SIZE(sta32x_regs),
.cache_type = REGCACHE_RBTREE,
diff --git a/sound/soc/codecs/sta32x.h b/sound/soc/codecs/sta32x.h
index d8e32a6..4ccc722 100644
--- a/sound/soc/codecs/sta32x.h
+++ b/sound/soc/codecs/sta32x.h
@@ -67,7 +67,7 @@
#define STA32X_Reserved 0x2a
#define STA32X_FDRC1 0x2b
#define STA32X_FDRC2 0x2c
-/* Reserved 0x2d */
+#define STA32X_STATUS 0x2d
/* STA326 register field definitions */
--
2.1.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next prev parent reply other threads:[~2015-01-21 23:00 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-21 23:01 [PATCH 00/10] ASoC: sta32x: Add device tree binding Thomas Niederprüm
2015-01-21 23:01 ` [PATCH 01/10] ASoC: sta32x: Convert to direct regmap API usage Thomas Niederprüm
2015-01-21 23:01 ` [PATCH 02/10] ASoC: sta32x: make sta32x a gpio consumer for the reset GPIO Thomas Niederprüm
2015-01-27 17:00 ` Mark Brown
2015-01-21 23:01 ` [PATCH 03/10] ASoC: sta32x: use DECLARE_TLV_DB_RANGE macro Thomas Niederprüm
2015-01-21 23:01 ` Thomas Niederprüm [this message]
2015-01-27 17:03 ` [PATCH 04/10] ASoC: sta32x: add status register Mark Brown
2015-01-21 23:01 ` [PATCH 05/10] ASoC: sta32x: move code to calculate mclk divider and extrapolation ratio to sta32x_hw_params() Thomas Niederprüm
2015-01-21 23:01 ` [PATCH 06/10] ASoC: sta32x: add device tree binding Thomas Niederprüm
2015-01-21 23:01 ` [PATCH 07/10] ASoC: sta32x: use dev_dbg() for debug output Thomas Niederprüm
2015-01-21 23:02 ` [PATCH 08/10] ASoC: sta32x: minor Kconfig update Thomas Niederprüm
2015-01-21 23:02 ` [PATCH 09/10] ASoC: sta32x: correct bit shift value for IDE register Thomas Niederprüm
2015-01-27 17:09 ` Mark Brown
2015-01-21 23:02 ` [PATCH 10/10] ASoC: sta32x: change dai name to be in line with the sta350 driver Thomas Niederprüm
2015-01-22 13:05 ` [PATCH 00/10] ASoC: sta32x: Add device tree binding Lars-Peter Clausen
2015-01-22 13:12 ` Daniel Mack
2015-01-22 20:46 ` Thomas Niederprüm
2015-01-27 17:16 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421881322-27806-5-git-send-email-niederp@physik.uni-kl.de \
--to=niederp@physik.uni-kl.de \
--cc=alsa-devel@alsa-project.org \
--cc=brandau@gmx.de \
--cc=broonie@kernel.org \
--cc=lars@metafoo.de \
--cc=zonque@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).