Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: han.lu@intel.com
To: broonie@kernel.org, alsa-devel@alsa-project.org,
	liam.r.girdwood@intel.com
Cc: "Lu, Han" <han.lu@intel.com>
Subject: [PATCH v2 4/8] ASoC: Intel: add kcontrol to enable/disable sound effect module waves
Date: Tue, 10 Mar 2015 10:41:23 +0800	[thread overview]
Message-ID: <1425955287-29661-4-git-send-email-han.lu@intel.com> (raw)
In-Reply-To: <1425955287-29661-1-git-send-email-han.lu@intel.com>

From: "Lu, Han" <han.lu@intel.com>

Add kcontrol to enable/disable module waves. IPC is valid only when module
is loaded.

Signed-off-by: Lu, Han <han.lu@intel.com>

diff --git a/sound/soc/intel/sst-haswell-pcm.c b/sound/soc/intel/sst-haswell-pcm.c
index a604cc4..3d10acc 100644
--- a/sound/soc/intel/sst-haswell-pcm.c
+++ b/sound/soc/intel/sst-haswell-pcm.c
@@ -318,6 +318,42 @@ static int hsw_volume_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int hsw_waves_switch_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_platform *platform = snd_soc_kcontrol_platform(kcontrol);
+	struct hsw_priv_data *pdata = snd_soc_platform_get_drvdata(platform);
+	struct sst_hsw *hsw = pdata->hsw;
+	enum sst_hsw_module_id id = SST_HSW_MODULE_WAVES;
+
+	ucontrol->value.integer.value[0] = sst_hsw_is_module_active(hsw, id);
+	return 0;
+}
+
+static int hsw_waves_switch_put(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_platform *platform = snd_soc_kcontrol_platform(kcontrol);
+	struct hsw_priv_data *pdata = snd_soc_platform_get_drvdata(platform);
+	struct sst_hsw *hsw = pdata->hsw;
+	int ret = 0;
+	enum sst_hsw_module_id id = SST_HSW_MODULE_WAVES;
+	bool switch_on = (bool)ucontrol->value.integer.value[0];
+
+	if (sst_hsw_is_module_loaded(hsw, id)) {
+		if (switch_on == sst_hsw_is_module_active(hsw, id))
+			return 0;
+
+		/* ipc is valid only when module is loaded */
+		if (switch_on)
+			ret = sst_hsw_module_enable(hsw, id, 0);
+		else
+			ret = sst_hsw_module_disable(hsw, id, 0);
+	}
+
+	return ret;
+}
+
 /* TLV used by both global and stream volumes */
 static const DECLARE_TLV_DB_SCALE(hsw_vol_tlv, -9000, 300, 1);
 
@@ -339,6 +375,9 @@ static const struct snd_kcontrol_new hsw_volume_controls[] = {
 	SOC_DOUBLE_EXT_TLV("Mic Capture Volume", 4, 0, 8,
 		ARRAY_SIZE(volume_map) - 1, 0,
 		hsw_stream_volume_get, hsw_stream_volume_put, hsw_vol_tlv),
+	/* enable/disable module waves */
+	SOC_SINGLE_BOOL_EXT("Waves Switch", 0,
+		hsw_waves_switch_get, hsw_waves_switch_put),
 };
 
 /* Create DMA buffer page table for DSP */
-- 
1.9.1

  parent reply	other threads:[~2015-03-10  2:41 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-10  2:41 [PATCH v2 1/8] ASoC: Intel: add function to load firmware image han.lu
2015-03-10  2:41 ` [PATCH v2 2/8] ASoC: Intel: add function to load sound effect module waves han.lu
2015-03-10  2:41 ` [PATCH v2 3/8] ASoC: Intel: add function to enable/disable " han.lu
2015-03-10  2:41 ` han.lu [this message]
2015-03-10 20:37   ` [PATCH v2 4/8] ASoC: Intel: add kcontrol " Mark Brown
2015-03-11  7:07     ` Lu, Han
2015-03-11 12:57       ` Mark Brown
2015-03-10  2:41 ` [PATCH v2 5/8] ASoC: Intel: track module state on RTD3 han.lu
2015-03-10  2:41 ` [PATCH v2 6/8] ASoC: Intel: add function to set parameter to sound effect module waves han.lu
2015-03-10  2:41 ` [PATCH v2 7/8] ASoC: Intel: add kcontrol " han.lu
2015-03-10  2:41 ` [PATCH v2 8/8] ASoC: Intel: enable parameter restore for " han.lu
2015-03-10 20:38 ` [PATCH v2 1/8] ASoC: Intel: add function to load firmware image Mark Brown
2015-03-11  6:48   ` Lu, Han
2015-03-11 12:54     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425955287-29661-4-git-send-email-han.lu@intel.com \
    --to=han.lu@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=liam.r.girdwood@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox