From: Lars-Peter Clausen <lars@metafoo.de>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: Oder Chiou <oder_chiou@realtek.com>,
Bard Liao <bardliao@realtek.com>,
alsa-devel@alsa-project.org, Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH 6/7] ASoC: rt5670: Replace direct snd_soc_codec dapm field access
Date: Tue, 19 May 2015 21:49:10 +0200 [thread overview]
Message-ID: <1432064952-31997-6-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1432064952-31997-1-git-send-email-lars@metafoo.de>
The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level() and replace all
other manual access to codec->dapm with snd_soc_codec_get_dapm().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/codecs/rt5670.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c
index 9235711..840dd6d 100644
--- a/sound/soc/codecs/rt5670.c
+++ b/sound/soc/codecs/rt5670.c
@@ -416,12 +416,12 @@ static bool rt5670_readable_register(struct device *dev, unsigned int reg)
static int rt5670_headset_detect(struct snd_soc_codec *codec, int jack_insert)
{
int val;
+ struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
struct rt5670_priv *rt5670 = snd_soc_codec_get_drvdata(codec);
if (jack_insert) {
- snd_soc_dapm_force_enable_pin(&codec->dapm,
- "Mic Det Power");
- snd_soc_dapm_sync(&codec->dapm);
+ snd_soc_dapm_force_enable_pin(dapm, "Mic Det Power");
+ snd_soc_dapm_sync(dapm);
snd_soc_update_bits(codec, RT5670_GEN_CTRL3, 0x4, 0x0);
snd_soc_update_bits(codec, RT5670_CJ_CTRL2,
RT5670_CBJ_DET_MODE | RT5670_CBJ_MN_JD,
@@ -447,15 +447,15 @@ static int rt5670_headset_detect(struct snd_soc_codec *codec, int jack_insert)
} else {
snd_soc_update_bits(codec, RT5670_GEN_CTRL3, 0x4, 0x4);
rt5670->jack_type = SND_JACK_HEADPHONE;
- snd_soc_dapm_disable_pin(&codec->dapm, "Mic Det Power");
- snd_soc_dapm_sync(&codec->dapm);
+ snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
+ snd_soc_dapm_sync(dapm);
}
} else {
snd_soc_update_bits(codec, RT5670_INT_IRQ_ST, 0x8, 0x0);
snd_soc_update_bits(codec, RT5670_GEN_CTRL3, 0x4, 0x4);
rt5670->jack_type = 0;
- snd_soc_dapm_disable_pin(&codec->dapm, "Mic Det Power");
- snd_soc_dapm_sync(&codec->dapm);
+ snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
+ snd_soc_dapm_sync(dapm);
}
return rt5670->jack_type;
@@ -2603,7 +2603,7 @@ static int rt5670_set_bias_level(struct snd_soc_codec *codec,
switch (level) {
case SND_SOC_BIAS_PREPARE:
- if (SND_SOC_BIAS_STANDBY == codec->dapm.bias_level) {
+ if (SND_SOC_BIAS_STANDBY == snd_soc_codec_get_bias_level(codec)) {
snd_soc_update_bits(codec, RT5670_PWR_ANLG1,
RT5670_PWR_VREF1 | RT5670_PWR_MB |
RT5670_PWR_BG | RT5670_PWR_VREF2,
@@ -2653,23 +2653,24 @@ static int rt5670_set_bias_level(struct snd_soc_codec *codec,
static int rt5670_probe(struct snd_soc_codec *codec)
{
+ struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
struct rt5670_priv *rt5670 = snd_soc_codec_get_drvdata(codec);
switch (snd_soc_read(codec, RT5670_RESET) & RT5670_ID_MASK) {
case RT5670_ID_5670:
case RT5670_ID_5671:
- snd_soc_dapm_new_controls(&codec->dapm,
+ snd_soc_dapm_new_controls(dapm,
rt5670_specific_dapm_widgets,
ARRAY_SIZE(rt5670_specific_dapm_widgets));
- snd_soc_dapm_add_routes(&codec->dapm,
+ snd_soc_dapm_add_routes(dapm,
rt5670_specific_dapm_routes,
ARRAY_SIZE(rt5670_specific_dapm_routes));
break;
case RT5670_ID_5672:
- snd_soc_dapm_new_controls(&codec->dapm,
+ snd_soc_dapm_new_controls(dapm,
rt5672_specific_dapm_widgets,
ARRAY_SIZE(rt5672_specific_dapm_widgets));
- snd_soc_dapm_add_routes(&codec->dapm,
+ snd_soc_dapm_add_routes(dapm,
rt5672_specific_dapm_routes,
ARRAY_SIZE(rt5672_specific_dapm_routes));
break;
--
1.8.0
next prev parent reply other threads:[~2015-05-19 19:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-19 19:49 [PATCH 1/7] ASoC: alc5623: Replace direct snd_soc_codec dapm field access Lars-Peter Clausen
2015-05-19 19:49 ` [PATCH 2/7] ASoC: rt286: " Lars-Peter Clausen
2015-05-19 19:49 ` [PATCH 3/7] ASoC: rt5631: " Lars-Peter Clausen
2015-05-19 19:49 ` [PATCH 4/7] ASoC: rt5640: " Lars-Peter Clausen
2015-05-19 19:49 ` [PATCH 5/7] ASoC: rt5651: " Lars-Peter Clausen
2015-05-19 19:49 ` Lars-Peter Clausen [this message]
2015-05-19 19:49 ` [PATCH 7/7] ASoC: rt5677: " Lars-Peter Clausen
2015-05-20 10:20 ` [PATCH 1/7] ASoC: alc5623: " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432064952-31997-6-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=alsa-devel@alsa-project.org \
--cc=bardliao@realtek.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=oder_chiou@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).