From: Jyri Sarha <jsarha@ti.com>
To: dri-devel@lists.freedesktop.org, airlied@linux.ie,
linux-omap@vger.kernel.org, alsa-devel@alsa-project.org
Cc: peter.ujfalusi@ti.com, broonie@kernel.org,
Jyri Sarha <jsarha@ti.com>,
liam.r.girdwood@linux.intel.com, tomi.valkeinen@ti.com,
rmk+kernel@arm.linux.org.uk
Subject: [PATCH RFC v2 2/7] ASoC: hdmi: Remove obsolete dummy HDMI codec
Date: Tue, 26 May 2015 21:59:06 +0300 [thread overview]
Message-ID: <1432666751-24794-3-git-send-email-jsarha@ti.com> (raw)
In-Reply-To: <1432666751-24794-1-git-send-email-jsarha@ti.com>
The hdmi stub codec has not been used since refactoring of OMAP HDMI
audio support.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
sound/soc/codecs/Kconfig | 4 --
sound/soc/codecs/Makefile | 2 -
sound/soc/codecs/hdmi.c | 109 ----------------------------------------------
3 files changed, 115 deletions(-)
delete mode 100644 sound/soc/codecs/hdmi.c
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 061c465..fb7f978 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -76,7 +76,6 @@ config SND_SOC_ALL_CODECS
select SND_SOC_MAX9877 if I2C
select SND_SOC_MC13783 if MFD_MC13XXX
select SND_SOC_ML26124 if I2C
- select SND_SOC_HDMI_CODEC
select SND_SOC_PCM1681 if I2C
select SND_SOC_PCM1792A if SPI_MASTER
select SND_SOC_PCM3008
@@ -430,9 +429,6 @@ config SND_SOC_BT_SCO
config SND_SOC_DMIC
tristate
-config SND_SOC_HDMI_CODEC
- tristate "HDMI stub CODEC"
-
config SND_SOC_ES8328
tristate "Everest Semi ES8328 CODEC"
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index abe2d7e..4e5d17c 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -69,7 +69,6 @@ snd-soc-max98925-objs := max98925.o
snd-soc-max9850-objs := max9850.o
snd-soc-mc13783-objs := mc13783.o
snd-soc-ml26124-objs := ml26124.o
-snd-soc-hdmi-codec-objs := hdmi.o
snd-soc-pcm1681-objs := pcm1681.o
snd-soc-pcm1792a-codec-objs := pcm1792a.o
snd-soc-pcm3008-objs := pcm3008.o
@@ -254,7 +253,6 @@ obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o
obj-$(CONFIG_SND_SOC_MAX9850) += snd-soc-max9850.o
obj-$(CONFIG_SND_SOC_MC13783) += snd-soc-mc13783.o
obj-$(CONFIG_SND_SOC_ML26124) += snd-soc-ml26124.o
-obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o
obj-$(CONFIG_SND_SOC_PCM1681) += snd-soc-pcm1681.o
obj-$(CONFIG_SND_SOC_PCM1792A) += snd-soc-pcm1792a-codec.o
obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
diff --git a/sound/soc/codecs/hdmi.c b/sound/soc/codecs/hdmi.c
deleted file mode 100644
index bd42ad3..0000000
--- a/sound/soc/codecs/hdmi.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * ALSA SoC codec driver for HDMI audio codecs.
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- * Author: Ricardo Neri <ricardo.neri@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-#include <linux/module.h>
-#include <sound/soc.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-
-#define DRV_NAME "hdmi-audio-codec"
-
-static const struct snd_soc_dapm_widget hdmi_widgets[] = {
- SND_SOC_DAPM_INPUT("RX"),
- SND_SOC_DAPM_OUTPUT("TX"),
-};
-
-static const struct snd_soc_dapm_route hdmi_routes[] = {
- { "Capture", NULL, "RX" },
- { "TX", NULL, "Playback" },
-};
-
-static struct snd_soc_dai_driver hdmi_codec_dai = {
- .name = "hdmi-hifi",
- .playback = {
- .stream_name = "Playback",
- .channels_min = 2,
- .channels_max = 8,
- .rates = SNDRV_PCM_RATE_32000 |
- SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
- SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
- SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE,
- .sig_bits = 24,
- },
- .capture = {
- .stream_name = "Capture",
- .channels_min = 2,
- .channels_max = 2,
- .rates = SNDRV_PCM_RATE_32000 |
- SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
- SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
- SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE |
- SNDRV_PCM_FMTBIT_S24_LE,
- },
-
-};
-
-#ifdef CONFIG_OF
-static const struct of_device_id hdmi_audio_codec_ids[] = {
- { .compatible = "linux,hdmi-audio", },
- { }
-};
-MODULE_DEVICE_TABLE(of, hdmi_audio_codec_ids);
-#endif
-
-static struct snd_soc_codec_driver hdmi_codec = {
- .dapm_widgets = hdmi_widgets,
- .num_dapm_widgets = ARRAY_SIZE(hdmi_widgets),
- .dapm_routes = hdmi_routes,
- .num_dapm_routes = ARRAY_SIZE(hdmi_routes),
- .ignore_pmdown_time = true,
-};
-
-static int hdmi_codec_probe(struct platform_device *pdev)
-{
- return snd_soc_register_codec(&pdev->dev, &hdmi_codec,
- &hdmi_codec_dai, 1);
-}
-
-static int hdmi_codec_remove(struct platform_device *pdev)
-{
- snd_soc_unregister_codec(&pdev->dev);
- return 0;
-}
-
-static struct platform_driver hdmi_codec_driver = {
- .driver = {
- .name = DRV_NAME,
- .of_match_table = of_match_ptr(hdmi_audio_codec_ids),
- },
-
- .probe = hdmi_codec_probe,
- .remove = hdmi_codec_remove,
-};
-
-module_platform_driver(hdmi_codec_driver);
-
-MODULE_AUTHOR("Ricardo Neri <ricardo.neri@ti.com>");
-MODULE_DESCRIPTION("ASoC generic HDMI codec driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRV_NAME);
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-05-26 18:59 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-26 18:59 [PATCH RFC v2 0/7] Implement generic ASoC HDMI codec Jyri Sarha
2015-05-26 18:59 ` [PATCH RFC v2 1/7] ASoC: core: If component doesn't have of_node use parent's node instead Jyri Sarha
2015-06-02 20:09 ` Mark Brown
2015-05-26 18:59 ` Jyri Sarha [this message]
2015-06-02 20:10 ` [PATCH RFC v2 2/7] ASoC: hdmi: Remove obsolete dummy HDMI codec Mark Brown
2015-09-20 0:13 ` Applied "ASoC: hdmi: Remove obsolete dummy HDMI codec" to the asoc tree Mark Brown
2015-05-26 18:59 ` [PATCH RFC v2 3/7] ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders Jyri Sarha
2015-08-14 19:25 ` Mark Brown
2015-08-17 8:39 ` Jyri Sarha
2015-05-26 18:59 ` [PATCH RFC v2 4/7] ASoC: hdmi-codec: Add ELD based audio pcm rules DO NOT MERGE Jyri Sarha
2015-05-26 18:59 ` [PATCH RFC v2 5/7] drm/i2c: tda998x: Add support of a DT graph of ports " Jyri Sarha
2015-05-26 18:59 ` [PATCH RFC v2 6/7] drm/i2c: tda998x: Register ASoC HDMI codec for audio functionality " Jyri Sarha
2015-05-26 18:59 ` [PATCH RFC v2 7/7] ARM: dts: am335x-boneblack: Add HDMI audio support " Jyri Sarha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432666751-24794-3-git-send-email-jsarha@ti.com \
--to=jsarha@ti.com \
--cc=airlied@linux.ie \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=liam.r.girdwood@linux.intel.com \
--cc=linux-omap@vger.kernel.org \
--cc=peter.ujfalusi@ti.com \
--cc=rmk+kernel@arm.linux.org.uk \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).