From: Liam Girdwood <liam.r.girdwood@linux.intel.com>
To: Sergey Kiselev <skiselev@gmail.com>
Cc: alsa-devel@alsa-project.org, Mark Brown <broonie@kernel.org>,
Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Subject: Re: ASoC: PATCH: wm8731 - reinitialize regmap cache after hardware reset
Date: Thu, 28 May 2015 17:52:46 +0100 [thread overview]
Message-ID: <1432831966.2726.63.camel@loki> (raw)
In-Reply-To: <CA+abuVebbr9Cif_SfB+JcNhUOMV70fdWa-Q-nk+gFv9H5MRtgQ@mail.gmail.com>
Hi Sergey,
Best to always CC Mark on any ASoC patches, I've also added Richard from
Wolfson. Best to read submitting patches from the Documentation
directory too :)
On Thu, 2015-05-28 at 09:34 -0700, Sergey Kiselev wrote:
> Hi,
>
> I am working on a machine driver that uses wm8731 codec and I've
> noticed that it will not work after rmmod/modprobe of that machine
> driver. The issue is that wm8731_probe() resets the hardware, but it
> doesn't reinitialize the regmap cache to the default values.
>
> The patch below fixes this issue.
>
> I also skimmed through other codecs, and some of them might have
> similar issue (wm8510.c, wm8711.c, wm8750.c, wm8753.c, wm8940.c,
> wm8960.c, wm8971.c, wm8974.c, wm8988.c, wm8990.c)
>
Richard, can Wolfson take care of these ones. I guess some of the older
codecs have no way to reset the registers ?
> Another way to avoid this issue might be resetting the codec in the
> *_spi_probe()/*_i2c_probe(), so that it only gets reset once when
> codec is loading.
>
> Thanks in advance for any comments/suggestions on the patch.
>
> Thanks,
> Sergey
>
> Signed-off-by: Sergey Kiselev <skiselev@gmail.com>
>
> diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
> index 2245b6a..76af75b 100644
> --- a/sound/soc/codecs/wm8731.c
> +++ b/sound/soc/codecs/wm8731.c
> @@ -84,7 +84,7 @@ static bool wm8731_writeable(struct device *dev,
> unsigned int reg)
> return reg <= WM8731_RESET;
> }
>
> -#define wm8731_reset(c) snd_soc_write(c, WM8731_RESET, 0)
I would have expected this to reset the register values so I'm not sure
why it's failing in your case ?
> +static int wm8731_reset(struct snd_soc_codec *codec);
>
> static const char *wm8731_input_select[] = {"Line In", "Mic"};
>
> @@ -665,6 +665,21 @@ static const struct regmap_config wm8731_regmap = {
> .num_reg_defaults = ARRAY_SIZE(wm8731_reg_defaults),
> };
>
> +static int wm8731_reset(struct snd_soc_codec *codec)
> +{
> + int ret;
> + struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
> +
> + ret = snd_soc_write(codec, WM8731_RESET, 0);
> +
> + if (ret != 0)
> + return ret;
> +
> + regmap_reinit_cache(wm8731->regmap, &wm8731_regmap);
> +
> + return 0;
> +}
> +
Your mailer has screwed up the formatting here :(
> #if defined(CONFIG_SPI_MASTER)
> static int wm8731_spi_probe(struct spi_device *spi)
> {
Liam
next prev parent reply other threads:[~2015-05-28 16:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-28 16:34 ASoC: PATCH: wm8731 - reinitialize regmap cache after hardware reset Sergey Kiselev
2015-05-28 16:52 ` Liam Girdwood [this message]
2015-05-28 19:26 ` Mark Brown
[not found] ` <CA+abuVeO4=au_X0Z_MjPsq40b1fHbjezKRy_fTOgQ=SzmaPK5Q@mail.gmail.com>
[not found] ` <20150528145548.fa5a0f2d78c0bb2549088fc2@intel.com>
2015-05-29 9:32 ` Mark Brown
2015-06-02 11:55 ` Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432831966.2726.63.camel@loki \
--to=liam.r.girdwood@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=rf@opensource.wolfsonmicro.com \
--cc=skiselev@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).