From: Vinod Koul <vinod.koul@intel.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, patches.audio@intel.com,
liam.r.girdwood@linux.intel.com,
Vinod Koul <vinod.koul@intel.com>,
broonie@kernel.org, Jeeja KP <jeeja.kp@intel.com>
Subject: [PATCH v5 2/2] ALSA: hda - add new HDA registers
Date: Wed, 3 Jun 2015 12:24:32 +0530 [thread overview]
Message-ID: <1433314472-24965-3-git-send-email-vinod.koul@intel.com> (raw)
In-Reply-To: <1433314472-24965-1-git-send-email-vinod.koul@intel.com>
From: Jeeja KP <jeeja.kp@intel.com>
This patch adds new registers as per HD audio Spec like capability registers
for processing pipe, software position based FIFO, Multiple Links and Global
Time Synchronization.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
include/sound/hda_register.h | 88 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/include/sound/hda_register.h b/include/sound/hda_register.h
index 0c7536e30fa4..ae995e523ff8 100644
--- a/include/sound/hda_register.h
+++ b/include/sound/hda_register.h
@@ -28,6 +28,10 @@
#define AZX_REG_STATESTS 0x0e
#define AZX_REG_GSTS 0x10
#define AZX_GSTS_FSTS (1 << 1) /* flush status */
+#define AZX_REG_GCAP2 0x12
+#define AZX_REG_LLCH 0x14
+#define AZX_REG_OUTSTRMPAY 0x18
+#define AZX_REG_INSTRMPAY 0x1A
#define AZX_REG_INTCTL 0x20
#define AZX_REG_INTSTS 0x24
#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */
@@ -81,6 +85,7 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
#define AZX_REG_SD_FIFOW 0x0e
#define AZX_REG_SD_FIFOSIZE 0x10
#define AZX_REG_SD_FORMAT 0x12
+#define AZX_REG_SD_FIFOL 0x14
#define AZX_REG_SD_BDLPL 0x18
#define AZX_REG_SD_BDLPU 0x1c
@@ -138,6 +143,89 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
#define AZX_MAX_CORB_ENTRIES 256
#define AZX_MAX_RIRB_ENTRIES 256
+/* Capability header Structure */
+#define AZX_REG_CAP_HDR 0x0
+#define AZX_CAP_HDR_VER_OFF 28
+#define AZX_CAP_HDR_VER_MASK (0xF << AZX_CAP_HDR_VER_OFF)
+#define AZX_CAP_HDR_ID_OFF 16
+#define AZX_CAP_HDR_ID_MASK (0xFFF << AZX_CAP_HDR_ID_OFF)
+#define AZX_CAP_HDR_NXT_PTR_MASK 0xFFFF
+
+/* registers of Software Position Based FIFO Capability Structure */
+#define AZX_SPB_CAP_ID 0x4
+#define AZX_REG_SPB_BASE_ADDR 0x700
+#define AZX_REG_SPB_SPBFCH 0x00
+#define AZX_REG_SPB_SPBFCCTL 0x04
+/* Base used to calculate the iterating register offset */
+#define AZX_SPB_BASE 0x08
+/* Interval used to calculate the iterating register offset */
+#define AZX_SPB_INTERVAL 0x08
+
+/* registers of Global Time Synchronization Capability Structure */
+#define AZX_GTS_CAP_ID 0x1
+#define AZX_REG_GTS_GTSCH 0x00
+#define AZX_REG_GTS_GTSCD 0x04
+#define AZX_REG_GTS_GTSCTLAC 0x0C
+#define AZX_GTS_BASE 0x20
+#define AZX_GTS_INTERVAL 0x20
+
+/* registers for Processing Pipe Capability Structure */
+#define AZX_PP_CAP_ID 0x3
+#define AZX_REG_PP_PPCH 0x10
+#define AZX_REG_PP_PPCTL 0x04
+#define AZX_PPCTL_PIE (1<<31)
+#define AZX_PPCTL_GPROCEN (1<<30)
+/* _X_ = dma engine # and cannot * exceed 29 (per spec max 30 dma engines) */
+#define AZX_PPCTL_PROCEN(_X_) (1<<(_X_))
+
+#define AZX_REG_PP_PPSTS 0x08
+
+#define AZX_PPHC_BASE 0x10
+#define AZX_PPHC_INTERVAL 0x10
+
+#define AZX_REG_PPHCLLPL 0x0
+#define AZX_REG_PPHCLLPU 0x4
+#define AZX_REG_PPHCLDPL 0x8
+#define AZX_REG_PPHCLDPU 0xC
+
+#define AZX_PPLC_BASE 0x10
+#define AZX_PPLC_MULTI 0x10
+#define AZX_PPLC_INTERVAL 0x10
+
+#define AZX_REG_PPLCCTL 0x0
+#define AZX_PPLCCTL_STRM_BITS 4
+#define AZX_PPLCCTL_STRM_SHIFT 20
+#define AZX_REG_MASK(bit_num, offset) \
+ (((1 << (bit_num)) - 1) << (offset))
+#define AZX_PPLCCTL_STRM_MASK \
+ AZX_REG_MASK(AZX_PPLCCTL_STRM_BITS, AZX_PPLCCTL_STRM_SHIFT)
+#define AZX_PPLCCTL_RUN (1<<1)
+#define AZX_PPLCCTL_STRST (1<<0)
+
+#define AZX_REG_PPLCFMT 0x4
+#define AZX_REG_PPLCLLPL 0x8
+#define AZX_REG_PPLCLLPU 0xC
+
+/* registers for Multiple Links Capability Structure */
+#define AZX_ML_CAP_ID 0x2
+#define AZX_REG_ML_MLCH 0x00
+#define AZX_REG_ML_MLCD 0x04
+#define AZX_ML_BASE 0x40
+#define AZX_ML_INTERVAL 0x40
+
+#define AZX_REG_ML_LCAP 0x00
+#define AZX_REG_ML_LCTL 0x04
+#define AZX_REG_ML_LOSIDV 0x08
+#define AZX_REG_ML_LSDIID 0x0C
+#define AZX_REG_ML_LPSOO 0x10
+#define AZX_REG_ML_LPSIO 0x12
+#define AZX_REG_ML_LWALFC 0x18
+#define AZX_REG_ML_LOUTPAY 0x20
+#define AZX_REG_ML_LINPAY 0x30
+
+#define AZX_MLCTL_SPA (1<<16)
+#define AZX_MLCTL_CPA 23
+
/*
* helpers to read the stream position
*/
--
1.9.1
next prev parent reply other threads:[~2015-06-03 6:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-03 6:54 [PATCH v5 0/2] Add HDA codec match and new registers Vinod Koul
2015-06-03 6:54 ` [PATCH v5 1/2] ALSA: hda - add HDA default codec match function Vinod Koul
2015-06-03 6:54 ` Vinod Koul [this message]
2015-06-03 12:02 ` [PATCH v5 0/2] Add HDA codec match and new registers Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433314472-24965-3-git-send-email-vinod.koul@intel.com \
--to=vinod.koul@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=jeeja.kp@intel.com \
--cc=liam.r.girdwood@linux.intel.com \
--cc=patches.audio@intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox