From mboxrd@z Thu Jan 1 00:00:00 1970 From: Oder Chiou Subject: [PATCH v4 3/3] ASoC: rt5645: add device tree support Date: Wed, 10 Jun 2015 14:27:58 +0800 Message-ID: <1433917678-13166-3-git-send-email-oder_chiou@realtek.com> References: <1433917678-13166-1-git-send-email-oder_chiou@realtek.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from rtits2.realtek.com.tw (rtits2.realtek.com [60.250.210.242]) by alsa0.perex.cz (Postfix) with ESMTP id 33F602658BA for ; Wed, 10 Jun 2015 08:28:07 +0200 (CEST) In-Reply-To: <1433917678-13166-1-git-send-email-oder_chiou@realtek.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: broonie@kernel.org, lgirdwood@gmail.com Cc: Oder Chiou , Bard Liao , alsa-devel@alsa-project.org, john.lin@realtek.com, flove@realtek.com List-Id: alsa-devel@alsa-project.org Modify the RT5645 driver to parse platform data from device tree. Write a DT binding document to describe those properties. Signed-off-by: Bard Liao Signed-off-by: Oder Chiou --- * Add hp-detect-gpios' property --- Documentation/devicetree/bindings/sound/rt5645.txt | 72 ++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rt5645.txt diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt new file mode 100644 index 0000000..7cee1f5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt5645.txt @@ -0,0 +1,72 @@ +RT5650/RT5645 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : One of "realtek,rt5645" or "realtek,rt5650". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Optional properties: + +- hp-detect-gpios: + a GPIO spec for the external headphone detect pin. If jd-mode = 0, + we will get the JD status by getting the value of hp-detect-gpios. + +- realtek,in2-differential + Boolean. Indicate MIC2 input are differential, rather than single-ended. + +- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using IN2P pin as dmic1 data pin + 2: using GPIO6 pin as dmic1 data pin + 3: using GPIO10 pin as dmic1 data pin + 4: using GPIO12 pin as dmic1 data pin + +- realtek,dmic2-data-pin + 0: dmic2 is not used + 1: using IN2N pin as dmic2 data pin + 2: using GPIO5 pin as dmic2 data pin + 3: using GPIO11 pin as dmic2 data pin + +-- realtek,jd-mode : The JD mode of rt5645/rt5650 + 0 : rt5645/rt5650 JD function is not used + 1 : Mode-0 (VDD=3.3V), two port jack detection + 2 : Mode-1 (VDD=3.3V), one port jack detection + 3 : Mode-2 (VDD=1.8V), one port jack detection + +Pins on the device (for linking into audio routes) for RT5645/RT5650: + + * DMIC L1 + * DMIC R1 + * DMIC L2 + * DMIC R2 + * IN1P + * IN1N + * IN2P + * IN2N + * Haptic Generator + * HPOL + * HPOR + * LOUTL + * LOUTR + * PDM1L + * PDM1R + * SPOL + * SPOR + +Example: + +codec: rt5650@1a { + compatible = "realtek,rt5650"; + reg = <0x1a>; + hp-detect-gpios = <&gpio 19 0>; + interrupt-parent = <&gpio>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + realtek,dmic-en = "true"; + realtek,en-jd-func = "true"; + realtek,jd-mode = <3>; +}; \ No newline at end of file -- 1.8.1.1.439.g50a6b54