From: Liam Girdwood <liam.r.girdwood@linux.intel.com>
To: Antonio Ospite <ao2@ao2.it>
Cc: Michele Curti <michele.curti@gmail.com>,
Luka Karinja <luka.karinja@gmail.com>,
Vinod Koul <vinod.koul@intel.com>,
alsa-devel@alsa-project.org, Takashi Iwai <tiwai@suse.de>,
"Nikula, Jarkko" <jarkko.nikula@intel.com>,
Bard Liao <bardliao@realtek.com>
Subject: Re: writing an alsa driver
Date: Wed, 24 Jun 2015 12:40:21 +0100 [thread overview]
Message-ID: <1435146021.2655.62.camel@loki> (raw)
In-Reply-To: <20150624133126.212f5fa537d3edc537644043@ao2.it>
On Wed, 2015-06-24 at 13:31 +0200, Antonio Ospite wrote:
> On Wed, 24 Jun 2015 15:51:57 +0530
> Vinod Koul <vinod.koul@intel.com> wrote:
>
> [...]
> > For Playback you can try:
> >
> > #DSP routing
> > amixer -c0 sset 'codec_out0 mix 0 pcm0_in' on
> > amixer -c0 sset 'media0_out mix 0 media1_in' on
> > amixer -c0 sset 'media1_in Gain 0' 80%
> > amixer -c0 sset 'media1_in Gain 0 Ramp Delay' 50
> > amixer -c0 sset 'media1_in Gain 0' off
> > amixer -c0 sset 'pcm0_in Gain 0' 80%
> > amixer -c0 sset 'pcm0_in Gain 0 Ramp Delay' 50
> > amixer -c0 sset 'pcm0_in Gain 0' off
> > amixer -c0 sset 'codec_out0 Gain 0' 80%
> > amixer -c0 sset 'codec_out0 Gain 0 Ramp Delay' 50
> > amixer -c0 sset 'codec_out0 Gain 0' off
> >
> > #Codec routin, if you have different one please modfiy
> > amixer -c0 sset "DAC MIXL INF1" on
> > amixer -c0 sset "DAC MIXR INF1" on
> > amixer -c0 sset "Stereo DAC MIXL DAC L1" on
> > amixer -c0 sset "Stereo DAC MIXR DAC R1" on
> > amixer -c0 sset "SPK MIXL DAC L1" on
> > amixer -c0 sset "SPK MIXR DAC R1" on
> > amixer -c0 sset "SPOL MIX SPKVOL L" on
> > amixer -c0 sset "SPOR MIX SPKVOL R" on
> > amixer -c0 sset "SPOL MIX DAC L1" on
> > amixer -c0 sset "SPOR MIX DAC R1" on
> > amixer -c0 sset "Speaker L" on
> > amixer -c0 sset "Speaker R" on
> > amixer -c0 sset "Headphone" off
> > amixer -c0 sset "Ext Spk" on
> >
> > I have used this in T100.
> >
>
> OK, I guess this answers my request for a state file :)
> I had not read this message yet when I wrote the other one.
>
Might be worth creating a UCM config for this machine since there are
several different outputs.
Liam
next prev parent reply other threads:[~2015-06-24 11:40 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-21 14:52 writing an alsa driver Michele Curti
2015-05-23 16:32 ` Michele Curti
2015-05-27 6:45 ` Takashi Iwai
2015-05-27 8:54 ` Michele Curti
2015-05-27 18:41 ` Liam Girdwood
2015-05-27 20:13 ` Michele Curti
2015-05-28 11:31 ` Liam Girdwood
2015-05-28 12:53 ` Michele Curti
2015-05-28 13:21 ` Liam Girdwood
2015-05-28 19:17 ` Michele Curti
2015-05-29 9:42 ` Liam Girdwood
2015-05-29 13:17 ` Michele Curti
2015-06-01 11:06 ` Liam Girdwood
2015-06-04 7:09 ` Marcus Bannerman
2015-06-04 9:04 ` Michele Curti
2015-06-04 8:59 ` Michele Curti
2015-06-04 10:33 ` Liam Girdwood
2015-06-04 17:44 ` Juergen Bausa
2015-06-04 19:39 ` Michele Curti
2015-06-05 7:00 ` Jarkko Nikula
2015-06-08 8:26 ` Michele Curti
2015-06-08 8:49 ` Michele Curti
2015-06-13 13:47 ` Luka Karinja
2015-06-15 16:46 ` Michele Curti
2015-06-15 17:04 ` Liam Girdwood
2015-06-16 20:50 ` Michele Curti
2015-06-17 9:16 ` Liam Girdwood
2015-06-17 21:34 ` Michele Curti
2015-06-18 11:14 ` Vinod Koul
2015-06-18 18:47 ` Michele Curti
2015-06-19 7:54 ` Vinod Koul
2015-06-19 8:12 ` Michele Curti
2015-06-17 6:39 ` Jarkko Nikula
2015-06-23 9:09 ` Michele Curti
2015-06-23 9:51 ` Liam Girdwood
2015-06-24 10:21 ` Vinod Koul
2015-06-24 11:31 ` Antonio Ospite
2015-06-24 11:40 ` Liam Girdwood [this message]
2015-06-24 16:04 ` Vinod Koul
2015-06-24 18:21 ` Michele Curti
2015-06-25 3:24 ` Vinod Koul
2015-06-25 7:39 ` Michele Curti
2016-03-03 11:11 ` Michele Curti
2016-03-03 11:27 ` Vinod Koul
2016-03-03 13:08 ` Michele Curti
2016-03-03 16:20 ` Pierre-Louis Bossart
2016-03-04 11:07 ` Michele Curti
-- strict thread matches above, loose matches on Subject: below --
2015-07-22 20:05 Marco Bodega
2015-07-24 20:54 ` Michele Curti
2015-08-10 14:12 Johnny
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435146021.2655.62.camel@loki \
--to=liam.r.girdwood@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=ao2@ao2.it \
--cc=bardliao@realtek.com \
--cc=jarkko.nikula@intel.com \
--cc=luka.karinja@gmail.com \
--cc=michele.curti@gmail.com \
--cc=tiwai@suse.de \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).