From: Liam Girdwood <liam.r.girdwood@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.de>, Vinod Koul <vinod.koul@intel.com>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <liam.r.girdwood@linux.intel.com>
Subject: [PATCH v2 02/13] conf: topology: Add topology file for broadwell audio DSP
Date: Wed, 1 Jul 2015 14:44:24 +0100 [thread overview]
Message-ID: <1435758275-4047-2-git-send-email-liam.r.girdwood@linux.intel.com> (raw)
In-Reply-To: <1435758275-4047-1-git-send-email-liam.r.girdwood@linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
---
src/conf/Makefile.am | 2 +-
src/conf/topology/Makefile.am | 1 +
src/conf/topology/broadwell/Makefile.am | 4 +
src/conf/topology/broadwell/broadwell.conf | 375 +++++++++++++++++++++++++++++
4 files changed, 381 insertions(+), 1 deletion(-)
create mode 100644 src/conf/topology/Makefile.am
create mode 100644 src/conf/topology/broadwell/Makefile.am
create mode 100644 src/conf/topology/broadwell/broadwell.conf
diff --git a/src/conf/Makefile.am b/src/conf/Makefile.am
index 948d5a1..a04f73f 100644
--- a/src/conf/Makefile.am
+++ b/src/conf/Makefile.am
@@ -1,4 +1,4 @@
-SUBDIRS=cards pcm alsa.conf.d ucm
+SUBDIRS=cards pcm alsa.conf.d ucm topology
cfg_files = alsa.conf
if BUILD_ALISP
diff --git a/src/conf/topology/Makefile.am b/src/conf/topology/Makefile.am
new file mode 100644
index 0000000..f56a96c
--- /dev/null
+++ b/src/conf/topology/Makefile.am
@@ -0,0 +1 @@
+SUBDIRS=broadwell
diff --git a/src/conf/topology/broadwell/Makefile.am b/src/conf/topology/broadwell/Makefile.am
new file mode 100644
index 0000000..35d1e83
--- /dev/null
+++ b/src/conf/topology/broadwell/Makefile.am
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+topologydir = $(alsaconfigdir)/topology/broadwell
+topology_DATA = broadwell.conf
+EXTRA_DIST = $(topology_DATA)
diff --git a/src/conf/topology/broadwell/broadwell.conf b/src/conf/topology/broadwell/broadwell.conf
new file mode 100644
index 0000000..05b3889
--- /dev/null
+++ b/src/conf/topology/broadwell/broadwell.conf
@@ -0,0 +1,375 @@
+# Dynamic Firmware Configuration for Broadwell
+
+# TLV
+SectionTLV."hsw_vol_tlv" {
+ Comment "TLV used by both global and stream volumes"
+
+ scale {
+ min "-9000"
+ step "300"
+ mute "1"
+ }
+}
+
+# Controls
+SectionControlMixer."Master Playback Volume" {
+ Comment "Global DSP volume"
+
+ # control belongs to this index group
+ index "1"
+
+ # Channel register and shift for Front Left/Right
+ channel."FL" {
+ reg "0"
+ shift "0"
+ }
+ channel."FR" {
+ reg "0"
+ shift "8"
+ }
+
+ # max control value and whether value is inverted
+ max "31"
+ invert "false"
+
+ # control uses bespoke driver get/put/info ID 0
+ ops."ctl" {
+ info "volsw"
+ get "256"
+ put "256"
+ }
+
+ # uses TLV data above
+ tlv "hsw_vol_tlv"
+}
+
+SectionControlMixer."Media0 Playback Volume" {
+ Comment "Offload 0 volume"
+
+ # control belongs to this index group
+ index "1"
+
+ # Channel register and shift for Front Left/Right
+ channel."FL" {
+ reg "1"
+ shift "0"
+ }
+ channel."FR" {
+ reg "1"
+ shift "8"
+ }
+
+ # max control value and whether value is inverted
+ max "31"
+ invert "false"
+
+ # control uses bespoke driver get/put/info ID 0
+ ops."ctl" {
+ info "volsw"
+ get "257"
+ put "257"
+ }
+
+ # uses TLV data above
+ tlv "hsw_vol_tlv"
+}
+
+SectionControlMixer."Media1 Playback Volume" {
+ Comment "Offload 1 volume"
+
+ # control belongs to this index group
+ index "1"
+
+ # Channel register and shift for Front Left/Right
+ channel."FL" {
+ reg "2"
+ shift "0"
+ }
+ channel."FR" {
+ reg "2"
+ shift "8"
+ }
+
+ # max control value and whether value is inverted
+ max "31"
+ invert "false"
+
+ # control uses bespoke driver get/put/info ID 0
+ ops."ctl" {
+ info "volsw"
+ get "257"
+ put "257"
+ }
+
+ # uses TLV data above
+ tlv "hsw_vol_tlv"
+}
+
+SectionControlMixer."Mic Capture Volume" {
+ Comment "Mic Capture volume"
+
+ # control belongs to this index group
+ index "1"
+
+ # Channel register and shift for Front Left/Right
+ channel."FL" {
+ reg "0"
+ shift "0"
+ }
+ channel."FR" {
+ reg "0"
+ shift "8"
+ }
+
+ # max control value and whether value is inverted
+ max "31"
+ invert "false"
+
+ # control uses bespoke driver get/put/info ID 0
+ ops."ctl" {
+ info "volsw"
+ get "257"
+ put "257"
+ }
+
+ # uses TLV data above
+ tlv "hsw_vol_tlv"
+}
+
+SectionWidget."SSP0 CODEC IN" {
+
+ index "1"
+ type "aif_in"
+ no_pm "true"
+ shift "0"
+ invert "0"
+}
+
+SectionWidget."SSP0 CODEC OUT" {
+
+ index "1"
+ type "aif_out"
+ no_pm "true"
+ shift "0"
+ invert "0"
+}
+
+SectionWidget."SSP1 BT IN" {
+
+ index "1"
+ type "aif_in"
+ no_pm "true"
+ shift "0"
+ invert "0"
+}
+
+SectionWidget."SSP1 BT OUT" {
+
+ index "1"
+ type "aif_out"
+ no_pm "true"
+ shift "0"
+ invert "0"
+}
+
+SectionWidget."Playback VMixer" {
+
+ index "1"
+ type "mixer"
+ no_pm "true"
+ shift "0"
+ invert "0"
+}
+
+# PCM Configurations supported by FW
+SectionPCMConfig."PCM 48k Stereo 24bit" {
+
+ config."playback" {
+ format "S24_LE"
+ rate "48000"
+ channels "2"
+ tdm_slot "0xf"
+ }
+
+ config."capture" {
+ format "S24_LE"
+ rate "48000"
+ channels "2"
+ tdm_slot "0xf"
+ }
+}
+
+SectionPCMConfig."PCM 48k Stereo 16bit" {
+
+ config."playback" {
+ format "S16_LE"
+ rate "48000"
+ channels "2"
+ tdm_slot "0xf"
+ }
+
+ config."capture" {
+ format "S16_LE"
+ rate "48000"
+ channels "2"
+ tdm_slot "0xf"
+ }
+}
+
+SectionPCMConfig."PCM 48k 2P/4C 16bit" {
+
+ config."playback" {
+ format "S16_LE"
+ rate "48000"
+ channels "2"
+ tdm_slot "0xf"
+ }
+
+ config."capture" {
+ format "S16_LE"
+ rate "48000"
+ channels "4"
+ tdm_slot "0xf"
+ }
+}
+
+# PCM capabilities supported by FW
+SectionPCMCapabilities."System Playback" {
+
+ formats "S24_LE,S16_LE"
+ rate_min "48000"
+ rate_max "48000"
+ channels_min "2"
+ channels_max "2"
+}
+
+SectionPCMCapabilities."Analog Capture" {
+
+ formats "S24_LE,S16_LE"
+ rate_min "48000"
+ rate_max "48000"
+ channels_min "2"
+ channels_max "4"
+}
+
+SectionPCMCapabilities."Loopback Capture" {
+
+ formats "S24_LE,S16_LE"
+ rate_min "48000"
+ rate_max "48000"
+ channels_min "2"
+ channels_max "2"
+}
+
+SectionPCMCapabilities."Offload0 Playback" {
+ formats "S24_LE,S16_LE"
+ rate_min "8000"
+ rate_max "192000"
+ channels_min "2"
+ channels_max "2"
+}
+
+SectionPCMCapabilities."Offload1 Playback" {
+ formats "S24_LE,S16_LE"
+ rate_min "8000"
+ rate_max "48000"
+ channels_min "2"
+ channels_max "2"
+}
+
+# PCM devices exported by Firmware
+SectionPCM."System Pin" {
+
+ index "1"
+
+ # used for binding to the PCM
+ ID "0"
+
+ pcm."playback" {
+
+ capabilities "System Playback"
+
+ configs [
+ "PCM 48k Stereo 24bit"
+ "PCM 48k Stereo 16bit"
+ ]
+ }
+
+ pcm."capture" {
+
+ capabilities "Analog Capture"
+
+ configs [
+ "PCM 48k Stereo 24bit"
+ "PCM 48k Stereo 16bit"
+ "PCM 48k 2P/4C 16bit"
+ ]
+ }
+}
+
+SectionPCM."Offload0 Pin" {
+
+ index "1"
+
+ # used for binding to the PCM
+ ID "1"
+
+ pcm."playback" {
+
+ capabilities "Offload0 Playback"
+
+ configs [
+ "PCM 48k Stereo 24bit"
+ "PCM 48k Stereo 16bit"
+ ]
+ }
+}
+
+SectionPCM."Offload1 Pin" {
+
+ index "1"
+
+ # used for binding to the PCM
+ ID "2"
+
+ pcm."playback" {
+
+ capabilities "Offload1 Playback"
+
+ configs [
+ "PCM 48k Stereo 24bit"
+ "PCM 48k Stereo 16bit"
+ ]
+ }
+}
+
+SectionPCM."Loopback Pin" {
+
+ index "1"
+
+ # used for binding to the PCM
+ ID "3"
+
+ pcm."capture" {
+
+ capabilities "Loopback Capture"
+
+ configs [
+ "PCM 48k Stereo 24bit"
+ "PCM 48k Stereo 16bit"
+ ]
+ }
+}
+
+SectionGraph."dsp" {
+ index "1"
+
+ lines [
+ "Playback VMixer, , System Playback"
+ "Playback VMixer, , Offload0 Playback"
+ "Playback VMixer, , Offload1 Playback"
+ "SSP0 CODEC OUT, , Playback VMixer"
+ "Loopback Capture, , Playback VMixer"
+ "Analog Capture, , SSP0 CODEC IN"
+ ]
+}
--
2.1.4
next prev parent reply other threads:[~2015-07-01 13:45 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-01 13:44 [PATCH v2 01/13] topology: uapi: Add UAPI headers for topology ABI Liam Girdwood
2015-07-01 13:44 ` Liam Girdwood [this message]
2015-07-01 15:47 ` [PATCH v2 02/13] conf: topology: Add topology file for broadwell audio DSP Takashi Iwai
2015-07-01 16:16 ` Liam Girdwood
2015-07-01 13:44 ` [PATCH v2 03/13] topology: Add topology core parser Liam Girdwood
2015-07-01 16:00 ` Takashi Iwai
2015-07-01 13:44 ` [PATCH v2 04/13] topology: Add text section parser Liam Girdwood
2015-07-01 16:03 ` Takashi Iwai
2015-07-01 13:44 ` [PATCH v2 05/13] topology: Add PCM parser Liam Girdwood
2015-07-01 16:14 ` Takashi Iwai
2015-07-01 16:20 ` Liam Girdwood
2015-07-01 13:44 ` [PATCH v2 06/13] topology: Add operations parser Liam Girdwood
2015-07-01 13:44 ` [PATCH v2 07/13] topology: Add private data parser Liam Girdwood
2015-07-01 16:20 ` Takashi Iwai
2015-07-07 15:54 ` Liam Girdwood
2015-07-07 16:19 ` Takashi Iwai
2015-07-08 8:57 ` Liam Girdwood
2015-07-08 13:31 ` Jin, Yao
2015-07-08 14:14 ` Takashi Iwai
2015-07-08 14:21 ` Liam Girdwood
2015-07-01 13:44 ` [PATCH v2 08/13] topology: Add DAPM object parser Liam Girdwood
2015-07-01 13:44 ` [PATCH v2 09/13] topology: Add CTL parser Liam Girdwood
2015-07-01 13:44 ` [PATCH v2 10/13] topology: Add Channel map parser Liam Girdwood
2015-07-01 13:44 ` [PATCH v2 11/13] topology: Add binary file builder Liam Girdwood
2015-07-01 13:44 ` [PATCH v2 12/13] topology: autotools: Add build support for topology core Liam Girdwood
2015-07-01 13:44 ` [PATCH v2 13/13] topology: doxygen: Add doxygen " Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435758275-4047-2-git-send-email-liam.r.girdwood@linux.intel.com \
--to=liam.r.girdwood@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=tiwai@suse.de \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox